MP Pumps 22386 2" BRONZE INLET FLG

MP Pump 21362 Pump FM10 Bronze Ped MP Pumps 21326 FLOMAX 8 Self Priming Centrifugal Pump End Only 2" X 2" NPT Ports Capacity up to 150 GPM Total Head up to 100 feet FM8PPK B: PEM 3/4 5.0

Scot Pump 35067-2.50 Motor/Pump Unit • Compact • Enclosed Switch Compartment   Pump • All Bronze marine centrifugal pump Freshwater or seawater applications • Precision machined to close tolerances for consistent performance. • Hardware - Type 303 stainless steel • Semi-open impeller handles solids • 2.50" Impeller mounted on motor shaft • Heavy-duty, designed for continuous 24 hour – 7 day operation.   Shaft Seal • Rated at 75 PSI – 5 BAR • Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components   Motor – 2 Pole • Meets Coast Guard ignition protected requirements. The thermal protector and starting switch are in the enclosed outlet cover. • Sealed ball bearings • Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt • Dual frequency 50 Hz or 60 Hz single phase motors are available • Stainless steel shaft • Three phase motors are not available  

MP Pumps 22368 2" BRONZE INLET PORT

MP Pumps 21383 FM 15 BRONZE PUMP MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   3" X 3" NPT Ports Capacity up to 320 GPM Total Head up to 145 feet Bronze construction 5.75 inch diameter impeller

Jabsco 18540-0000 Pump Cent FEATURES Pump Body: Bronze Pedestal Port Size: Inlet: 1 1/4" NPT Outlet: 1" NPT Flow: 50 GPM at 10 feet of Head, 3450 RPM Impeller: Bronze Centrifugal Shaft Seal: Mechanical Carbon-Ceramic, Buna Shaft: 304 Stainless Steel     APPLICATIONS / CHARACTERISTICS Continuous duty rated bronze centrifugal pedestal pump.       Jabsco Centrifugal Pump Head Only 3" Impeller 50GPM at 10' Head, 1 1/4"FNPT Inlet, 1"FNPT Outlet  

MP Pumps 22498 BRONZE IMPELLER ONLY 5.75"

MP Pumps 21371 Flomax 15 NPT Self Priming Centrifugal Pump Pak Bronze, 6.0" Impeller with Base and Fasteners, 3" x 3"   FLOMAX 15 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.    A FLOMAX 15 PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 184TC and 215C frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.    The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Wash-down Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift    This item is 'build to order'.  

Jabsco Pump Nitrile Imp 1" Lip Sl   FEATURES Pump Body: Bronze Pedestal Port Size: 1" NPT, Internal Flow: Up to 27.9 GPM at 10 feet of head, 2100 RPM. Reduced cam versions have reduced flow. Pressure: Up to 26 PSI Impeller: Neoprene or Nitrile Shaft Seal: Lip Type or Mechanical Face Seal Shaft: Stainless Steel Bearings: Shielded Ball Bearings     APPLICATIONS / CHARACTERISTICS MARINE- Pump bilge, Washdowns, Circulating water in bait tanks, Utility dock-side pump, Engine cooling.     INDUSTRIAL- Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Dilute acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING- Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE- Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.

Jabsco Pump Nitrl Imp 1" Face Sl   FEATURES Pump Body: Bronze Pedestal Port Size: 1" NPT, Internal Flow: Up to 27.9 GPM at 10 feet of head, 2100 RPM. Reduced cam versions have reduced flow. Pressure: Up to 26 PSI Impeller: Neoprene or Nitrile Shaft Seal: Lip Type or Mechanical Face Seal Shaft: Stainless Steel Bearings: Shielded Ball Bearings     APPLICATIONS / CHARACTERISTICS MARINE- Pump bilge, Washdowns, Circulating water in bait tanks, Utility dock-side pump, Engine cooling.     INDUSTRIAL- Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Dilute acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING- Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE- Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   Jabsco Flexible Impeller Pedestal Pump 1"NPT Face Seal Nitrile Impeller

Jabsco Pump Neo Imp 1" Lip Seal   FEATURES Pump Body: Bronze Pedestal Port Size: 1" NPT, Internal Flow: Up to 27.9 GPM at 10 feet of head, 2100 RPM. Reduced cam versions have reduced flow. Pressure: Up to 26 PSI Impeller: Neoprene or Nitrile Shaft Seal: Lip Type or Mechanical Face Seal Shaft: Stainless Steel Bearings: Shielded Ball Bearings     APPLICATIONS / CHARACTERISTICS MARINE- Pump bilge, Washdowns, Circulating water in bait tanks, Utility dock-side pump, Engine cooling.     INDUSTRIAL- Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Dilute acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING- Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE- Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   Jabsco Flexible Impeller Pedestal Pump 1"NPT Lip Seal Neoprene Impeller

Sherwood P2708X CUMMINS PUMP Sherwood bronze engine cooling pump Pulley driven pump - pulley not included Includes installed neoprene impeller Does not include inlet and outlet port elbows Mechanical seal Replacement impeller P/N 27000K Replaces Sherwood P2701-01, P2701-02, P2701X Replaces Cummins 4948142, 5266001, 5268375

16004B 1600 GPH Pro Series Livewell Pump Features: Bronze inlet weighted on base Double ball bearing, larger motor stack and more windings than any pump on the market Internally threaded port that won't break Removable check valve included Capacity at 13.6V: 0' head 1600 GPH Capacity at 13.6V: 3' head 1550 GPH GPH: 1600 Hose: 1-1/8" Amps: 7 Volts DC:12 Fuse: 10A

MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 15 Part #: MP21381 Size: 3 in. NPT Flow-Rate: 320 GPM Head Feet: 145   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine OEM  

Yamada DP-10BPT 3/8" Poly Teflon Pump Technical Specifications Inlet Port: 3/8 inch Max GPM: 6 Max PSI: 100 Outlet Port: 3/8 inch RPM: 300Max  Temperature: 180 degrees F   PTFE Seals Polypropylene DP-10 Series Pump The Yamada DP-10BPT Pump is an air-operated dual diaphragm pump with a maximum flow rate of 6 GPM and a maximum air pressure of 100 PSI. This AODD pump has a polypropylene body and an aluminum motor. The diaphragm, ball valve, and o-rings are made with PTFE material. Versatile pump that stands up to harsh environments.   Specifications: 6 GPM Diaphragms: PTFE Ball Valve: PTFE O-Rings: PTFE   Inlet and Outlet Ports: 3/8" Female NPT Air Inlet: 1/4" Female NPT (includes ball valve) Air Exhaust: 3/8" Female NPT (includes silencer) Maximum Liquid Temperature: 180° Fahrenheit Air Supply Pressure: 20 to 100 PSI (1.4 to 7 kgf/cm_) Maximum Solid: 1/32" Maximum Suction Life: 10 feet RPM: 300 (cycle speed)   Applications: Car Wash Washing/Cleaning Systems Chemical Delivery/Transfer Gas/Petroleum Paints/Dyes Mining Printing/Ink Stone/Clay/Glass Water Treatment