|
Black wire loop with plastic twist-lock case. 8" 14 gauge wire loop. Includes 20 amp SFE fuse. Display packaged.
|
8.99 |
|
|
Black 7" 14 ga. wire loop with black plastic twist-lock fuse holder and 20 amp fuse. Display packaged. WHILE QUANTITIES LAST.
|
9.99 |
|
|
ATO plastic fuse holder for fuses up to 20 amps. 8" wire loop, 14 ga.
|
9.89 |
|
|
Class T Fuse Holder with 2 Additional Studs 225-400A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
Class-T: 225-400 Amp
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.47 |
|
|
Class T Fuse Holder with 2 Additional Studs 450-600A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
Class-T: 450-600 Amp
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
59.23 |
|
|
Heavy duty black molded plastic base. Use with SFE, AGC or MDL fuses up to 20 amps. Brass fuse clips and 8-32 terminal screws. Common bus bar connects the hot side of fuses for power feed. Bus bar has 8-32 stud terminals for main power / ground main connections. Rated 20 amps per circuit, 120 amps total for block.
|
15.83 |
|
|
Fuse Holder ANL 300A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.85 |
|
|
ANL Fuse Holder with 2 Additional Studs, 750A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.47 |
|
|
Heavy duty black molded plastic base. Use with SFE, AGC or MDL fuses up to 20 amps. Brass fuse clips and 8-32 terminal screws. Common busbar connects hot side of fuses for power feed. Separate busbar is provided for ground or unfused common hot feed. Busbars have 8-32 screw terminals and stud terminals for power/ground main connections.
|
14.57 |
|
|
Heavy duty black molded plastic base. Use with SFE, AGC or MDL fuses up to 20 amps. Brass fuse clips and 8-32 terminal screws. Common busbar connects hot side of fuses for power feed. Separate busbar is provided for ground or unfused common hot feed. Busbars have 8-32 screw terminals and stud terminals for power/ground main connections.
|
21.67 |
|
|
Flat fuse holder comes with 12 ga. wire and a 30 amp ATO fuse.
|
11.79 |
|
|
ATM Mini Style Inline LED Fuse Holder - Up to 30A
This Sea-Dog LED inline mini fuse holder is meant for ATM mini-style fuses.
Features:
LED indicator that lights up when the fuse is blown
Designed to accept ATM mini automotive-style spade terminal fuses
For use with Sea-Dog ATM Mini Style Fuses 445002-445030 (sold separately).
12 gauge, 6” AWM wire lead
Constructed of injection-molded PVC. IP67 waterproof rating
Specifications:
Max Amps: 30
Fuse Holder Length: 1-9/16 in.
Fuse Holder Width: 15/16 in.
|
6.49 |
|
|
ATO/ATC Style Inline LED Fuse Holder - Up to 30A
This Sea-Dog LED inline mini fuse holder is meant for ATO/ATC style fuses.
Features:
LED indicator which lights up when the fuse is blown
Designed to accept ATO/ATC automotive-style spade terminal fuses
For use with Sea-Dog ATO or ATC Style Fuses 445101-445130, 445190, 445156, and 445157 (sold separately)
12 gauge 6” AWM wire lead
IP67 waterproof rating
Specifications:
Max Amps: 30
Fuse Holder Length: 1-1/4 in.
Fuse Holder Width: 1 in.
|
7.24 |
|
|
MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution.
Features:
Carded blister packaging for simple retail display
Compatible with MIDI bolt-down fuses up to 200A (sold separately)
The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block
Slots molded into the base enable secure tie-wrap mounting
Zinc-plated steel M5 studs and hex nuts
Bolt-down fuse holder base features M4 mounting holes
UL 94 V-0 flammability rating
Applications:
Battery and alternator Connections
*Fuses not included
|
8.16 |
|
|
VMANL Mini-ANL Fuse Holder - 4 to 8 AWG
T-SPEC'S VMANL fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time. Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.
The T-SPEC VMANL fuse holder accepts 4 to 8 gauge power cables and mini-ANL fuses.
Features:
Compact fuse holder with 360° rotating base
Accepts mini-ANL fuses
Connects to 4- to 8-gauge power cable
Solid brass construction
Black nickel finish
Water resistant
T20 Torx® screws
Gate Lock technology
In the Box:
One (1) mini-ANL fuse holder
Two (2) Threaded end-caps
4 and 8 gauge rubber grommets (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.64 |
|