|
Patented ATO/ATC fuse blocks allow you to design your own fuse panel. Interlocking modules in various sizes snap together to create any configuration. All with ground bus bar.
|
41.99 |
|
|
Patented ATO/ATC fuse blocks allow you to design your own fuse panel. Interlocking modules in various sizes snap together to create any configuration. All with ground bus bar.
|
32.79 |
|
|
Patented ATO/ATC fuse blocks allow you to design your own fuse panel. Interlocking modules in various sizes snap together to create any configuration. All with ground bus bar.
|
29.99 |
|
|
Patented ATO/ATC fuse blocks allow you to design your own fuse panel. Interlocking modules in various sizes snap together to create any configuration. All with ground bus bar.
|
47.39 |
|
|
Heavy duty black molded plastic base. Use with SFE, AGC or MDL fuses up to 20 amps. Brass fuse clips and 8-32 terminal screws. Common bus bar connects the hot side of fuses for power feed. Bus bar has 8-32 stud terminals for main power / ground main connections. Rated 20 amps per circuit, 120 amps total for block.
|
15.83 |
|
|
Heavy duty black molded plastic base. Use with SFE, AGC or MDL fuses up to 20 amps. Brass fuse clips and 8-32 terminal screws. Common busbar connects hot side of fuses for power feed. Separate busbar is provided for ground or unfused common hot feed. Busbars have 8-32 screw terminals and stud terminals for power/ground main connections.
|
14.57 |
|
|
Heavy duty black molded plastic base. Use with SFE, AGC or MDL fuses up to 20 amps. Brass fuse clips and 8-32 terminal screws. Common busbar connects hot side of fuses for power feed. Separate busbar is provided for ground or unfused common hot feed. Busbars have 8-32 screw terminals and stud terminals for power/ground main connections.
|
21.67 |
|
|
ST Blade Compact Fuse Blocks - 4 Circuits w/Cover
Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space.
Compact common source fuse block
Accepts ATO® and ATC® fast acting blade fuses
Single side entry wiring
Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper buses and fuse clips
Accepts ring or snap fork type terminals
Small format standard and custom labels available
Specifications
Circuits:4
Maximum Amperage: 100A per block / 30A per circuit
Maximum Voltage:32V DC
Mounting: #8 Screw (M4)
Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.13 |
|
|
ST Blade Compact Fuse Blocks - 8 Circuits w/Cover
Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space.
Compact common source fuse block
Accepts ATO® and ATC® fast acting blade fuses
Single side entry wiring
Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper buses and fuse clips
Accepts ring or snap fork type terminals
Small format standard and custom labels available
Specifications
Circuits:8
Maximum Amperage: 100A per block / 30A per circuit
Maximum Voltage:32V DC
Mounting: #8 Screw (M4)
Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.00 |
|
|
Blade Style LED Indicator Fuse Block with Negative Bus Bar - 6 Circuit
Nickel Plated Copper/Stainless Steel/Injection Molded ABS.
Features:
Red LED lights indicate when fuse is blown or missing
Uses ATO/ATC & ATM fuses 1A-30A
Main line terminal rating is 100A 32VDC max, with M5 metric threaded studs
Single line terminal rating is 30A 32VDC max, with M4 metric threaded studs
Includes semi-transparent cover and 71 labels
Terminals are nickel plated copper with stainless steel screws
Installs with four #8 FH fasteners (not included)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.87 |
|
|
Blade Style LED Indicator Fuse Block with Negative Bus Bar - 12 Circuit
Nickel Plated Copper/Stainless Steel/Injection Molded ABS.
Features:
Red LED lights indicate when fuse is blown or missing
Uses ATO/ATC & ATM fuses 1A-30A
Main line terminal rating is 100A 32VDC max, with M5 metric threaded studs
Single line terminal rating is 30A 32VDC max, with M4 metric threaded studs
Includes semi-transparent cover and 71 labels
Terminals are nickel plated copper with stainless steel screws
Installs with four #8 FH fasteners (not included)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.36 |
|
|
ST-Blade Split Bus Fuse Block
Features:
Provides two isolated groups of six ATO/ATC circuits
For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits
Screw terminals for securing wires accept ring terminals
One-piece stainless flange nuts ensure safe and secure connections
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements
Easy to open, push button latch for easy access to fuses
Tin-plated copper buses and fuse clips
Fuses sold separately
Specifications:
Circuits: 12
Maximum Amperage: 100A per block, 30A per circuit
Maximum Voltage: 32V DC
Mounting: #8 Screw (M4)
Negative Bus: #10-32 Stud
Screw Terminal Type: #8-32 Screws with captive star lock washer
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
62.74 |
|
|
MRBF Surface Mount 3 Circuit Fuse Block - Common Source
Surface mount fuse blocks accommodate three MRBF fuses for consolidated high amperage circuit protection
The independent source fuse block (5194) is ideal for 3 output battery chargers
The common source fuse block (5196) provides 3 loads from a single source
Clip-on cover insulates terminal connections
Versatile wiring options allow all wires to come out a single side
Label recesses for easy circuit identification
One-piece stainless flange nuts ensure safe and secure connections
Specifications
Ignition Protected: Yes
Maximum Amperage: 300a per block/240a per circuit
Maximum Voltage: 58v DC
Maximum Torque: 100 in-lb
Terminal Stud Size: M8 (5/16"-18)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.34 |
|
|
Surface Mount 3 Circuit Fuse Block - Independent Source
Surface mount fuse blocks accommodate three MRBF fuses for consolidated high amperage circuit protection
The independent source fuse block (5194) is ideal for 3 output battery chargers
The common source fuse block (5196) provides 3 loads from a single source
Clip-on cover insulates terminal connections
Versatile wiring options allow all wires to come out a single side
Label recesses for easy circuit identification
One-piece stainless flange nuts ensure safe and secure connections
Specifications
Ignition Protected: Yes
Maximum Amperage: 240 per circuit
Maximum Voltage: 58v DC
Maximum Torque: 100 in-lb
Terminal Stud Size: M8 (5/16"-18)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
54.74 |
|
|
5056 ST-Blade Water Resistant Fuse Block with Cover
Provides water-resistant circuit protection for ATO/ATC fuses & circuit breakers in a compact footprint. The single side nesting design allows for wire entry from one side to maximize space.
Features:
Water-resistant design with standard ring or fork type terminals allows for simple wiring with standard tools
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required
Accepts ATO and ATC fast-acting blade fuses
Accepts ATO/ATC-Style Low Profile Circuit Breakers
Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four write-on circuit labels
Small format standard and custom labels available
Spare fuse and fastener storage in cover
Specifications:
Amperage: 80A per block/25A per circuit
Maximum Voltage: 32V DC
Bus Material: Tin-Plated Copper C11000
Mounting Holes: Clearance for 1/4" (6mm) screws
Screw Terminal Type: #8-32 Screws with captive star lock washer
Wire Size: (1) 8 AWG to 4 AWG - Input/(5) 16 AWG to 10 AWG - Load
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
33.60 |
|