|
3 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
439.99 |
|
|
5/16" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black
Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.
Features:
Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose (distribution, return, vent and transfer)
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50 ft. (15 m) Boxed
Specifications:
Inner Diameter: (inch) 5/16" / (mm) 7.92
Outer Diameter: (inch) 0.611 / (mm) 15.5
Burst Pressure: (psi) 400 / (mpa) 2.76
Working Pressure: (psi) 100 / (mpa) 0.69
Bend Radius: (inch) 1.75" / (mm) 44.5
Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198
Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10)
*The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10
|
127.31 |
|
|
5/16" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray
This hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year.
Features:
Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone
Also, provides excellent rope-like bend-ability and fitting retention
For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)
EPA Certified and CARB Executive Order for low permeation Type B1-15
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Fluoroplastic Internal Barrier
Cover: Gray CPE Rubber
Reinforcement: 2-Spiral Polyester Plies
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50’ (15m) Boxed
Specifications:
Inner Diameter: (inch) 5/16" / (mm) 7.92
Outer Diameter: (inch) 0.500 / (mm) 12.7
Burst Pressure: (psi) 175 / (mpa) 1.21
Working Pressure: (psi) 35 / (mpa) 0.24
Bend Radius: (inch) 2.5" / (mm) 63.5
Weight: (lb/100 ft.) 7.8 / (kg/m) 0.116
Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0
*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15
|
112.56 |
|
|
Axiom 2 Pro 16 S 15.6" Chartplotter/Fishfinder - No Chart or Transducer
Axiom 2 Pro combines chartplotter, sonar, radar, autopilot, and video into a powerful all-in-one navigation system. With Axiom 2 Pro, you can navigate smarter and expand your system, thanks to the super intuitive LightHouse operating system. Plan your next trip and get underway confidently with Axiom 2 Pro’s HybridTouch™ — a simple touchscreen and keypad experience. Axiom 2 Pro S chartplotters feature built-in single channel High CHIRP sonar- the ideal sonar solution for reliable depth sounding and underwater exploration. Available in 9, 12, or 16-inch display sizes, Axiom Pro 2 is the perfect cruising companion.
Features:
Get underway faster with a fast 6-core processor
HydroTough™ nano-coating repels water for reliable touchscreen control and superior sunlight visibility
Confident HybridTouch™ control plus an interchangeable autopilot keypad or user-programable soft keys
Integrated High CHIRP sonar with transom, in-hull and low-profile through-hull CPT-S series transducer options
Smart backlighting and an ambient light sensor automatically adjust display brightness for day and evening
Create your own Axiom 2 Pro system with multiple networked Axiom displays
Stay entertained with streaming Apps and Axiom 2 Pro’s HDMI and audio output for remote displays and marine entertainment systems
Specifications:
Connections:
Digital Video & Audio Out Connection: HDMI Out Micro connector type D’
External GPS Antenna Connection: TNC connector
Accessory connection: USB Micro B (rear–charging, external storage device or RCR-SD/USB Accessory (A80440)
Ethernet connection: RayNet (10/100/1,000 Mbits/s) x2
External storage: MicroSD card slot x2 (front)
Chart options: Navionics+ or Navionics Platinum or C-map 4D Software, Lighthouse North America
NMEA 2000 connection: DeviceNet connector
Analog video connections: BNC Analog video input (on power cable)
Wireless connections: Bluetooth: V4.0, Wi-Fi: 802.11/b/g/n
Transducer connection: 25-pin RealVision type connector (requires adaptor cable)
Audio connections: Left and Right RCA connectors via Power/Video/Audio cable
GPS:
GNSS compatibility: GPS, Galileo, GLONASS, Beidou
Sonar:
Channels: CHIRP conical sonar ( Uses CPT-S Transducers with adapter cable A80490)
Depth range: 0.6 m (2 ft) to 274 m (900 ft) Depending on water conditions
Lighting:
Illumination: Axiom 2 Pro 9 1300 nits / 1300 cd/m2, Axiom 2 Pro 12 & 16 1200 nits / 1200 cd/m2
Storage:
Internal storage: 64 GB Solid State
|
6599.99 |
|
|
Axiom 2 Pro 16 S 15.6" Chartplotter/Fishfinder with Lighthouse North America Chart - No Transducer
Axiom 2 Pro combines chartplotter, sonar, radar, autopilot, and video into a powerful all-in-one navigation system. With Axiom 2 Pro, you can navigate smarter and expand your system, thanks to the super intuitive LightHouse operating system. Plan your next trip and get underway confidently with Axiom 2 Pro’s HybridTouch™ — a simple touchscreen and keypad experience. Axiom 2 Pro S chartplotters feature built-in single channel High CHIRP sonar- the ideal sonar solution for reliable depth sounding and underwater exploration. Available in 9, 12, or 16-inch display sizes, Axiom Pro 2 is the perfect cruising companion.
Features:
Get underway faster with a fast 6-core processor
HydroTough™ nano-coating repels water for reliable touchscreen control and superior sunlight visibility
Confident HybridTouch™ control plus an interchangeable autopilot keypad or user-programable soft keys
Integrated High CHIRP sonar with transom, in-hull and low-profile through-hull CPT-S series transducer options
Smart backlighting and an ambient light sensor automatically adjust display brightness for day and evening
Create your own Axiom 2 Pro system with multiple networked Axiom displays
Stay entertained with streaming Apps and Axiom 2 Pro’s HDMI and audio output for remote displays and marine entertainment systems
Specifications:
Connections:
Digital Video & Audio Out Connection: HDMI Out Micro connector type D’
External GPS Antenna Connection: TNC connector
Accessory connection: USB Micro B (rear – charging, external storage device or RCR-SD/USB Accessory (A80440)
Ethernet connection: RayNet (10/100/1,000 Mbits/s) x2
External storage: MicroSD card slot x2 (front)
Chart options: Navionics+ or Navionics Platinum or C-map 4D Software
Lighthouse North America Chart included
NMEA 2000 connection: DeviceNet connector
Analog video connections: BNC Analog video input (on power cable)
Wireless connections: Bluetooth: V4.0, Wi-Fi: 802.11/b/g/n
Transducer connection: 25-pin RealVision type connector (requires adaptor cable)
Audio connections: Left and Right RCA connectors via Power/Video/Audio cable
GPS:
GNSS compatibility: GPS, Galileo, GLONASS, Beidou
SONAR:
Channels: CHIRP conical sonar ( Uses CPT-S Transducers with adapter cable A80490)
Depth range: 0.6 m (2 ft) to 274 m (900 ft) Depending on water conditions
LIGHTING:
Illumination: Axiom 2 Pro 9 1300 nits / 1300 cd/m2, Axiom 2 Pro 12 & 16 1200 nits / 1200 cd/m2
STORAGE:
Internal storage: 64 GB Solid State
|
6654.99 |
|
|
5/16" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the Foot
Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber.
Features:
Sold by the foot
Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 250 ft. reel (sold by the foot)
Specifications:
Inner Diameter: (inch) 5/16" / (mm) 7.92
Outer Diameter: (inch) 0.611 / (mm) 15.5
Burst Pressure: (psi) 400 / (mpa) 2.76
Working Pressure: (psi) 100 / (mpa) 0.69
Bend Radius: (inch) 1.75" / (mm) 44.5
Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198
Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10)
*The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10
|
4.08 |
|
|
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
6.30 |
|
|
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
195.00 |
|
|
3/8" x 15' Nylon Double Braid Dock Line - Grey
Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking.
Applications:
Dock line - ≤55' (16.8 M) vessel
Mooring line - ≤ 30' (9.1 M) vessel
Technical Specifications:
Color: Grey
Material: Double braid nylon
Rope Diameter: 3/8"
Rope Length: 15'
Tensile Strength: 13,100 lb
*Sold as an Individual
|
43.32 |
|
|
1/2" x 15' Nylon Double Braid Dock Line - Grey
Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking.
Applications:
Dock line - ≤55' (16.8 M) vessel
Mooring line - ≤ 30' (9.1 M) vessel
Technical Specifications:
Color: Grey
Material: Double braid nylon
Rope Diameter: 1/2"
Rope Length: 15'
Tensile Strength: 13,100 lb
*Sold as an Individual
|
50.16 |
|
|
5/8" x 15' Nylon Double Braid Dock Line - Grey
Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking.
Applications:
Dock line - ≤55' (16.8 M) vessel
Mooring line - ≤ 30' (9.1 M) vessel
Technical Specifications:
Color: Grey
Material: Double braid nylon
Rope Diameter: 5/8"
Rope Length: 15'
Tensile Strength: 13,100 lb
*Sold as an Individual
|
64.98 |
|
|
MAGNUS Escape Hatch - OD 22-3/16" x 22-3/16"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are current in the market.
Features:
External Dimensions - 22 3/16" x 22 3/16"
Cut Out Dimensions - 19 15/16" x 19 15/16"
Number of Handles - 4
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
596.88 |
|
|
ALTUS Escape Hatch - OD 23-1/16" x 23-1/16"
ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.
They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.
Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
An aluminum counter flange and a mosquito screen are available for these hatches.
Features:
External Dimensions - 23 1/16" x 23 1/16"
Cut Out Dimensions - 19 15/16" x 19 15/16"
Number of Handles - 2
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
522.00 |
|
|
TACO Flex Vinyl Rub Rail Kit - Black w/White Insert - 50' -
1-1/4" x 15/16"
Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.
Features:
Vinyl
Rub Rail Kit
Black with White Insert
50'
1-1/4" x 15/16"
|
369.42 |
|
|
Flex Vinyl Rub Rail Kit - Black with Black Insert - 70' - 1-1/4" x
15/16"
Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide
Features:
Black with Black Insert
Vinyl
Rub Rail Kit
1-1/4" x 15/16"
70'
|
465.55 |
|