|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Replacement Outboard Tilt Trim Motor - Johnson/Evinrude, 2-Wire, 4 Bolt, EFI
Replacement outboard tilt trim motor that will fit BRP-OMC 1998-Up, 75 HP-250 HP FFI Outboard Engines, 4-bolt mount, Female Sealed Terminal Ends, Includes O-ring.
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC Tilt Trim Motor 438786
BRP-OMC Tilt Trim Motor 439937
BRP-OMC Tilt Trim Motor 5005254
SIERRA Tilt Trim Motor 18-6281
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
177.83 |
|
|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
54.99 |
|
|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
54.99 |
|
|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
54.99 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Johnson/Evinrude engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve in this kit
|
46.14 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)
This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end
For Johnson/Evinrude engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit
|
48.43 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|