|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
54.99 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
56.99 |
|
|
Stealth Series - L.E.D. Fold Down White All-Round Light
(1636)
For use on windshields, T-Tops, Rails, Arches and Hard Tops
Plastic Adapter Available for Flat or "V" Type Mounts, Contains Notch for Through-Base Wiring
Fold-Down, Adjustable Angle
Reduced Glare Design
Black Plastic Top with Clear Fluted Lens & Frosted Globe
Black Plastic Base
Vertical Height: 13-3/8"
12v
Pole: 3/4" Diameter Anodized
Base Dimensions: 2" x 1-1/2"
|
84.00 |
|
|
Stealth Series - L.E.D. Fold Down White All-Round Light
(1639)
For use on windshields, T-Tops, Rails, Arches and Hard Tops
Plastic Adapter Available for Flat or "V" Type Mounts, Contains Notch for Through-Base Wiring
Fold-Down, Adjustable Angle
Reduced Glare Design
Black Plastic Top with Clear Fluted Lens & Frosted Globe
Black Plastic Base
Vertical Height: 13-3/8"
12v
Pole: 3/4" Diameter Anodized
Base Dimensions: 2-1/4" x 5/8"
|
84.00 |
|
|
Harness Extension 1M f/E/M/SR Series
This Add-a-Light Extension gives you an additional 1 meter of length to allow for more versatility and installation options. It features 16 AWG wire and a Deutsch connector. This harness extension is designed to be used with E-Series or SR-Series light bars that are 20" or longer.
Features:
16 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
33.74 |
|
|
2018 Jeep Wrangler JL A-Pillar Mount for 2 D-Series, D-SS, SR-M or Ignite Lights
The 2018 Jeep Wrangler JL can go anywhere that you can take it, shouldn’t its auxiliary lighting options do the same? The all new Wrangler JL A-Pillar mount by RIGID gives that extra lighting needed for those dark times.
With the ability to attach several different RIGID lighting options from the D-Series, D-SS, SR-M, or Ignite families, the RIGID Jeep Wrangler A-Pillar mount takes auxiliary lighting to a new level. These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.
Lights sold separately.
In the Box:
All Necessary Hardware
∗ Sold as a Pair
|
112.50 |
|
|
Ram Mixed Combination Pin-Lock™ Security Knob/Stud/Key Knob f/ 2.25"/3.38" D/E Size Arms and Gimbal Brackets
The RAP-S-NUT5-GU replaces the knob on 2.25"/3.38" diameter D/E size arms and gimbal bracket. The RAP-S-NUT5-GU offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-NUT5-GU is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-NUT5-GU is the perfect accessory for keeping your mounted electronic device safe from theft and tampering.
Specifications/Features
The RAP-S-NUT5-G consists of the following:
1. 1/2"-20 female threaded security lock knob and stud for (Gimbal Brackets) 2. 1/4"-20 brass security jam nut for (RAM 2.25/3.38" Diameter Ball Double Socket Arms)
3. Key Knob
Material:
High Strength Composite
|
17.68 |
|
|
Mixed Combination Pin-Lock Security Nut and Key Knob for 2.25"/3.38" Diameter D/E Size Arms
The RAP-S-NUT5U consists of a 1/2"-20 female threaded security nut and key knob. The RAP-S-NUT5U replaces all knobs on 2.25"/3.38" diameter D/E size arms and mounts. The RAP-S-NUT5U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-NUT5U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-NUT5U is the perfect accessory for keeping your mounted electronic device safe from theft and tampering.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. Mount not included with purchase.
|
7.16 |
|
|
Spurs Line Cutter Zinc Anode - Size C, D & E
Features:
Size: C, D & E
Material: Zinc Anode
|
9.46 |
|
|
Spurs Line Cutter Aluminum Anode - Size C, D & E
Features:
Size: C, D & E
Material: Aluminum Anode
|
8.10 |
|
|
Spurs Line Cutter Magnesium Anode - Size C, D & E
Features:
Size: C, D & E
Material: Magnesium Anode
|
15.42 |
|
|
Replacement hub only for Rubex hub kits.
|
31.79 |
|
|
Replacement hub only for Rubex hub kits.
|
42.79 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
81.99 |
|