3 Blade aluminum propeller for 25-70 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" gear case.

Teak Louvered Insert Height:6-3/8" Width:11-3/16" Depth:3/4" Cut Out Height:5-3/8" Width:10-3/16" Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge. All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

3 Blade aluminum propeller for Yamaha 25-60 horsepower engines with 3-1/2" Gear Case and Honda 35-60 horse power engines with 3-1/4" Gear Case. Both 13 tooth spline and thru hub exhaust.

3 Blade aluminum propeller for 35-50 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" Gear Case.

G-6 Twin Eye Fender 11" x 30" - Graphite Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.  The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2 cm) Eye Diameter - 0.875" (2.2 cm) Circumference - 34.6" (87.8 cm) Volume - 8.5 gallons (32.2 L) Boat Size - 35'- 40' (10.7 - 12.2 M) Weight - 6.5 lb *Sold as an Individual

11" x 3" Rectangle Universal Electronics Base with 2.25" Ball The RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size Weight: 1.25 lbs. *Note: The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ Wrench The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The RAM-D-111U-C is Compatible With: Garmin Fishfinders and GPS Chartplotters Humminbird Fishfinders and GPS Chartplotters Lowrance Fishfinders and GPS Chartplotters Raymarine Fishfinders and GPS Chartplotters Overall Height: 8.125" Weight Capacity: Up to 15 lbs. Weight: 3.45 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size Hi-Torq™ Wrench The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.

A-Series Buoy - 11" x 15" Diameter - A-1 - Grey The A Series is the product that launched the Polyform story. This all-purpose buoy, with the signature "blue ropehold" has proven itself in the most adverse conditions. Making gear used in heavy seas is no easy task. That's why more fishermen use Polyform A Series than all other buoys combined. You name it — ocean, sea, river, or lake — and the A Series has been there. Put your trust in Polyform's most versatile and well-known product. Features: Even wall thickness for maximum strength and durability Polyform's unique vinyl valve system Redesigned rope hold for A-1 through A-7 for improved strength and durability Dual valve inflation/deflation system for sizes A-5, A-6, and A-7 Excellent choice for a rafting fender Offered in a wide range of brilliant, high-visibility colors Specifications: Diameter: 11" x 15" Fender Eye Diameter: 1" Recommended Line Diameter: 1/2" *Note Polyform does not recommend using a spliced fender line for our HTM boat fenders, in general, we recommend a 1/2" diameter line without a splice for our hole through the middle fenders.

SP2S1 - Uncut Rail Pod Max Useable Face: (11.75" x 7") Max Cut Out Area: (11" x 6.125") Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models). Stainless Steel Clamp A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails. Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in. Optional Accessory Pod One of the unique abilities with this SPOD is the ability to add optional side pods. Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket. 

G-6 Twin Eye Fender 11" x 30" - Black with Adapter Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit

G-6 Twin Eye Fender 11" x 30" - Blue with Adapter Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit

G-6 Twin Eye Fender 11" x 30" - White with Adapter Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit

G-6 Twin Eye Fender 11" x 30" - Black Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs *Sold as an Individual

G-6 Twin Eye Fender 11" x 30" - Blue Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs *Sold as an Individual

G-6 Twin Eye Fender 11" x 30" - White Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs *Sold as an Individual