|
Prop installation hardware, sold 1 piece per package.
|
14.19 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
45.39 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
47.79 |
|
|
Prop installation hardware, sold 1 piece per package. Refer to Yamaha hardware for other spacers and washers.
|
4.59 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
27.59 |
|
|
Smart Tab Trim Tabs 7 X 8 f/10-12' Boats w/20-25 HP
IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and perform better for less money?
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATED
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
108.55 |
|
|
Prop installation hardware, sold 1 piece per package.
|
24.29 |
|
|
Prop installation hardware, sold 1 piece per package.
|
6.09 |
|
|
Prop installation hardware, sold 1 piece per package. Refer to Yamaha hardware for other washers and prop nuts.
|
8.19 |
|
|
Fits: OMC 20-35 HP 2-cyl - 1987-93. Replaces: OMC 583473, 585059. 9-tooth drive gear. Uses *DV390 replacement drive gear, *DVK90 2-piece drive kit (fits current-model starters) SR390 repair kit.*NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
180.50 |
|
|
Backpack Tether
This lightweight backpack tether is perfect for conditions that demand hands-free attention. The durable nylon harness wrap with hook-n-loop attachment can accommodate any style of strap with widths up to 3.75" and is Modular Lightweight Load-carrying Equipment (MOLLE) compatible.
The same hook-n-loop material also is used to easily stow your compatible Garmin device for optimal GPS performance while still providing access at a moment's notice. When the device is detached from the hook-n-loop, the spine mount and lanyard cord - adjustable in length from 2" to 14" - ensure the device will stay with you at all times.
Compatible Devices:
eTrex® 10, 20 & 30
Oregon® Series
Dakota® 10 & 20
GPSMAP® 62 Series
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.19 |
|
|
Flojet 02095-109 Pressure Switch Kit 20/30 Psi
|
62.23 |
|
|
IWAKI MD0043, SCREW MD-15LF 20 30
|
6.89 |
|
|
Gas Filled Lift Spring - 20" - 30#
Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs.
Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST.
Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.40 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
23.19 |
|