|
3 Blade stainless interchangeable hub propeller for 25-75 horsepower engines with thru hub exhaust, 3-1/4" gear case. Category C prop. Requires RBX™ hub kit for installation.
|
229.99 |
|
|
11-1/8" x 24" Manual Seat Slide
This universal, low-profile design provides frictionless operation and is easily adaptable for a multitude of marine applications. Its high-strength polymer glides provide the smooth movement with a durable locking action. It comes with a front-mounted activation lever, which is easily accessible in all five positions when seated.
Features:
Meets ABYC H31 testing standards
Precision-machined 6000-series aluminum chassis
Double pin positive side lock
High-strength polymer glides provide self-lubricated, rattle-free, smooth operation
Features five adjustable, equally spaced positions with 3-5/8” of travel
Secure fit with universal mounting bolt pattern on box applications
Front activation paddle that slides with the seat for ease of use
Ideal for seats 29" to 40” wide
Ideal seat length/depth is 12" to 14"
Made in the USA
3-year limited warranty
|
596.09 |
|
|
11-1/8" x 36" Manual Seat Slide
Designed for helm chairs and benches 41" to 54" wide, this newly designed slide features a travel distance of up to 3-5/8" with five adjustable positions. Its high-strength polymer glides create a smooth, rattle-free design. Quickly and easily adjust seats using the front-mounted activation paddle handle, which is always accessible in all five positions.
Features:
Meets ABYC H31 testing standards
Precision-machined 6000-series aluminum chassis
Double pin positive side lock
High-strength polymer glides provide self-lubricated, rattle-free, smooth operation
Features five adjustable, equally spaced positions with 3-5/8” of travel
Secure fit with universal mounting bolt pattern on box applications
Front activation paddle that slides with the seat for ease of use
Ideal for seats 41" to 54” wide
Ideal seat length/depth is 12" to 14"
Made in the USA
3-year limited warranty
|
662.80 |
|
|
Triple Lock Rectangular Marine Hatch - 10" x 14" - White
This Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene with a structural honeycomb lid for superior rigidity and strength. Non-slip textured surface. Can be mounted horizontally or vertically. Full length piano hinge for added strength and security. Interior opening is 11-1/8" X 7" and will accept group 24 series size batteries. Installs with ten #10 FH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
54.59 |
|
|
Triple Lock Rectangular Marine Hatch - 10" x 14" - Black
This Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene with a structural honeycomb lid for superior rigidity and strength. Non-slip textured surface. Can be mounted horizontally or vertically. Full length piano hinge for added strength and security. Interior opening is 11-1/8" X 7" and will accept group 24 series size batteries. Installs with ten #10 FH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
54.59 |
|
|
Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - Square
Zinc-plated u-bolt for mounting brackets & accessories to trailer frames.
Features:
Square bend
Grade 5
7/16"-14 diameter/thread
3-1/8" W x 4" L
*Comes packaged with nuts and washers.
|
5.74 |
|
|
Zinc U-Bolt 7/16"-14 X 3-1/8" X 3" with Washers & Nuts - Square
Zinc-plated u-bolt for mounting brackets & accessories to trailer frames.
Features:
Square bend
Grade 5
7/16"-14 diameter/thread
3-1/8" W x 3" L
*Comes packaged with nuts and washers.
|
5.39 |
|
|
Stainless Steel Cylindrical Sink - (11-5/8" x 5") - Brushed Finish
This is a cylindrical sink with a brushed finish, and it's made of 18/10 stainless steel.
Specifications:
Flange Profile: A
Flange Width: 5/8 in.
Depth: 5 in.
Drain Opening: 2-1/16 in.
Shipping Weight: 7 lbs
|
95.99 |
|
|
Hatch Handle Latch - 3-1/8" x 2-11/16"
Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
68.57 |
|
|
3 Blade stainless interchangeable hub propeller for 25-75 horsepower engines with thru hub exhaust, 3-1/4" gear case. Category C prop. Requires RBX™ hub kit for installation.
|
229.99 |
|
|
1-1/8" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix
Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.
Features:
Flexible, but the 147 series is less flexible than the 149 series of hoses
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Clear vinyl reinforced with black helix
Color: Clear with black helix
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-49°C)
Boxed: 50ft. / (15.24m)
Inner Diameter: (inch) 1-1/8" / (mm) 28.6
Outer Diameter: (inch) 1.39" / (mm) 35.4
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.45
Bend Radius: (inch) 3.5" / (mm) 8.9
*Burst Pressure is 4 x Working Pressure
|
118.87 |
|
|
1-1/8" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black
Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.
Features:
149 series of hoses is extra flexible
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Hard PVC helix
Color: Black
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Boxed: 50ft. / (15.2m)
Inner Diameter: (inch) 1-1/8" / (mm) 28.6
Outer Diameter: (inch) 1.433" / (mm) 36.4
Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93
Weight: (Lb./ 50 ft.) 15 / (Kg/m) 6.80
Bend Radius: (inch) 3" / (mm) 76.2
*Burst Pressure is 4 x Working Pressure
|
137.32 |
|
|
Ampco BACKPLATE PIN 216D-11-1-S
|
6.08 |
|
|
March 893-11-1/2 +Pump/12V Mtr 1/2"Ports
This item is 'build to order'. Please contact us for lead time.
|
383.19 |
|
|
JABSCO SP1402-06 WOODRUFF KEY 1/8 X 5/8 ST
|
19.66 |
|