3 and 4 Blade stainless propeller for Mercruiser Bravo III. 19 tooth spline and thru hub exhaust. Fits all Bravo 3 stern drives.

Pontoon Bolster Bracket - 15-3/4" x 2" Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed at each frame cross member for maximum support and load capacity.

3 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.

MAGNUS Escape Hatch - OD 22-3/16" x 22-3/16" Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are current in the market. Features: External Dimensions -  22 3/16" x 22 3/16" Cut Out Dimensions - 19 15/16" x 19 15/16" Number of Handles - 4 *VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

3/4" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.  Features: Flexible, but the 147 series is less flexible than the 149 series of hoses Application: Bilge and live well hose Specifications: Tube & Cover: Clear vinyl reinforced with black helix  Color: Clear with black helix Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-49°C)  Boxed: 50ft. / (15.24m) Inner Diameter: (inch) 3/4" / (mm) 19 Outer Diameter: (inch) 0.968" / (mm) 24.6 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 11 / (Kg/m) 0.33 Bend Radius: (inch) 2.25" / (mm) 57.2 *Burst Pressure is 4 x Working Pressure

3/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max. Features:  Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 3/4" / (mm) 20 Outer Diameter: (inch) 1.15" / (mm) 29 Working Pressure: (Psi) 100 / (bar) 6.9 Bend Radius: (inch) 1" / (mm) 25 Weight: (Lb./50ft.) 23 / (Kg/m) 10.3 *Burst Pressure is 4 x Working Pressure

ALAS I Adjustable Fuel Sender - 6 to 15-3/4" - 3-180 Ohm For a more economical and practical solution for fuel monitoring for tank depths, VDO ALAS I 12/24 V fuel senders are definitely on the level!  These fuel senders are engineered with a redundant dual-wiper system and a unique "quiet arm" (minimizes float movement).  The slotted SAE 5-hole flange mount provides versatility for sender mounting options, and the stainless steel float arms and pivot adjust 140mm to 400mm.  So, for reliable performance you can count on--on the level--VDO ALAS I 12/24 V fuel senders deliver. Features:  Connection - .250" Spade Mounting Hardware - Included Low Fuel Warning Contact Voltage - 6-24V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3/4" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze. Features: 149 series of hoses is extra flexible  Application: Bilge and live well hose Specifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 3/4" / (mm) 19.1 Outer Diameter: (inch) .986" / (mm) 25 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 11 / (Kg/m) 4.99 Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure

3/4" x 25' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 3/4"  Rope Length: 25' Tensile Strength: 13,100 lb *Sold as an Individual

3/4" x 35' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 3/4"  Rope Length: 35' Tensile Strength: 13,100 lb *Sold as an Individual

Oberdorfer 600 Cent Pump Peo Brz 3/4 X 1/2  

Oberdorfer Cent Pump Ped Mnt 3/4 X 1/2 Ag Pump for Heat and Humidity Control Oberdorfer Ag pumps are the right product for the job. Our Ag pumps can pump fuel oil to the oil burner and heat water. Water Is heated to approximately 120 degrees Fahrenheit, and sprayed into the cotton batt, making it suitable for any need. Your company’s processing, bailing, and shipping efforts will be much more efficient after being outfitted with these hard working ag pumps.   Max Flow 25 GPM   Max Pressure 29 PSI   Rugged Bronze Construction Quiet Operation O-Ring Housing seal eliminates gasket problems Mechanical Seal - Carbon/Ceramic, Nitrile - standard, Fluoroelastomer (S10) or Polytetrafluoroethylene (PTFE) (S11) - options Designed for Pulley Drive Heavy Duty Integral Steel Shaft and Ball Bearings Handles Contaminated Liquids No bearing lubrication required

Teak Flag Pole - 3/4" x 18" Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil. Features: Made from the finest grade A, kiln-dried teakwood No deteriorating or warping

ProPress 3/4" x 1/2" Copper Reducer - Double Press Connection - Smart Connect Technology Features: For use with ASTM B88 tubing Copper Press connection Components: EPDM sealing elements