3 Blade stainless interchangeable hub propeller for 40-140 horsepower engines with thru hub exhaust, 4-1/4" gear case. Category D prop. Requires RBX™ hub kit for installation.

3 Blade aluminum propeller for 40-140 horsepower outboards and 1.6L through 3.0L sterndives with 4-1/4" gear case, 13 tooth spline and thru hub exhaust.

3 Blade aluminum propeller for 60-140 horsepower engines with 13 tooth spline and thru hub exhaust. 4-1/4" Gear Case.

3 Blade stainless propeller for 40-140 horsepower outboard and 1.6L-3.0L sterndive engines with 4-1/4" large Gearcase, 13 tooth spline and thru hub exhaust.

3 Blade stainless propeller for 40-140 horsepower outboard and 1.6L-3.0L sterndive engines with 4-1/4" large Gearcase, 13 tooth spline and thru hub exhaust.

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1423-4L - 4-Blade - 13" x 23 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Express® Mach3™ OS™ - Left Hand - Stainless Steel Propeller - OS-1613-L - 3-Blade - 15.625" x 13 Pitch The Express Mach3 OS Series of Stainless Steel Propellers are the next step in the evolution of our very popular larger diameter VO series. Our Engineers and Propeller Experts made improvements to the cup, leading and trailing edges, and the aggressive progressive rake and blade geometry that are Turning Point hallmarks. These modifications have produced a propeller with excellent hole shot, impressive bow lift, and class leading cornering.  The Express Mach3 OS is perfectly matched to large horsepower bay boats, offshore center consoles, and high horsepower pontoons/tri-toons. It will fit all 90hp and  larger 4.75" gearcase outboards from all engine manufacturers, and Mercury® Alpha One™ and Bravo One™, and Volvo® Penta® SX sterndrives. Large diameter three blade propellers offer great mid-range fuel economy in many applications. Whether you are looking to maximize your time on the water, extend your cruise range, or just stretch your fuel dollars, the Express Mach3 OS is a great choice to get the most out of your boat. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WAR15LWLH Warfare™ Level Wind 15 Left Hand Reel The PENN® Warfare was engineered to be an extremely versatile all- around reel at an affordable price. It features a lightweight graphite frame and sideplates with aluminum frame rings for improved rigidity to prevent frame-flex.  HT-100 drag washers provide smooth drag under heavy loads. Line Capacity Rings eliminate the question of how much line you have left when fighting a fish.  Features: Lightweight graphite frame and sideplates Forged and machined aluminum spool Machined brass main and pinion gear HT-100 carbon fiber drag washers Instant Anti-Reverse bearing Line Capacity Rings Specifications: Anti-Reverse Feature: Instant Anti-Reverse Bearing Count: 3 Braid Capacity Yd/Lb: 580/20 435/30 305/50          Braking System: Mechanical Color: Black/Red/Smoke Drag Material: HT-100 Drag Type: Star Drag Gear Ratio: 5.1:1 Mono Capacity M/mm: 340/0.35 290/0.38 195/0.46         Mono Capacity Yd/Lb: 375/12  320/15  215/20           Pre-Spooled Yd/Lb: Not Pre-Spooled Recovery Rate: 29" | 74cm     Reel Handle Position: Left Reel Size: 15 Reel Spool Material: Aluminum Spare Spool Material: No Spare Spool

WAR20LWLH Warfare™ Level Wind 20 Left Hand Reel The PENN® Warfare was engineered to be an extremely versatile all- around reel at an affordable price. It features a lightweight graphite frame and sideplates with aluminum frame rings for improved rigidity to prevent frame-flex.  HT-100 drag washers provide smooth drag under heavy loads. Line Capacity Rings eliminate the question of how much line you have left when fighting a fish.  Features: Lightweight graphite frame and sideplates Forged and machined aluminum spool Machined brass main and pinion gear HT-100 carbon fiber drag washers Instant Anti-Reverse bearing Line Capacity Rings Specifications: Anti-Reverse Feature: Instant Anti-Reverse Bearing Count: 3 Braid Capacity Yd/Lb: 865/20 650/30 455/50          Braking System: Mechanical Color: Black/Red/Smoke Drag Material: HT-100 Drag Type: Star Drag Gear Ratio: 5.1:1 Mono Capacity M/mm: 435/0.38 290/0.46 265/0.49             Mono Capacity Yd/Lb: 475/15  315/20  290/25              Pre-Spooled Yd/Lb: Not Pre-Spooled Recovery Rate: 29" | 74cm     Reel Handle Position: Left Reel Size: 20 Reel Spool Material: Aluminum Spare Spool Material: No Spare Spool

MAX-LP-DLC-L Max DLC Left Hand Low Profile Reel Value-packed power and performance, the Max Digital Line-Counter low profile reel gets the job done day after day with 5 stainless steel ball bearings that provide smooth operation. 20 pounds of drag pressure and a lighted digital line-counter provide accuracy and power for a variety of situations. The addition of a bent handle and drag star translates into a more ergonomic feel for all day comfort. ' Features: Lighted Digital Line counter Dura brass Gears Multi disc drag system 5 Ball bearings Compact bent handle and star DTT warning system (Distance to Tip) Specifications: Anti-Reverse Feature: Instant Anti-Reverse Bearing Count: 5 Braid Capacity M/mm: 125/0.25 95/0.30 70/0.35             Braid Capacity Yd/Lb: 135/20 105/30 75/50            Braking System: None Color: None Drag Material: Carbon Fiber Drag Type: Star Drag Gear Ratio: 6.4:1 Max Drag Lb/kg: 20/9.0 Mono Capacity M/mm: 125/0.29 105/0.32 70/0.38       Mono Capacity Yd/Lb: 135/10 110/12 80/17            Pre-Spooled Yd/Lb: Not Pre-Spooled Recovery Rate: 26" | 66cm     Reel Handle Position: Left Reel Size: LP Reel Spool Material: Aluminum Spare Spool Material: No Spare Spool

REVO BEAST 41 HS Revo® Beast 41 Left Hand Low Profile Reel For all of your heavy-duty applications, the Abu Garcia® Revo® Beast delivers high performance features specifically engineered for casting larger baits and fighting hard pulling fish. The X2-Cräftic™ alloy frame and sideplates provide a compact lightweight design while the Power Stack Carbon Matrix Drag System™ gives you the drag power to target those stronger fish.  Features: 7 stainless steel HPCR™ bearings + 1 roller bearing X2-Cräftic™ alloy frame and sideplates Power Stack Carbon Matrix Drag System™ Duragear™ brass gear D2 Gear Design™ DuraClutch design Extended bent handle with power knobs Infini™ brake system Ti coated line guide Infini II™ spool design Lube port Specifications: Anti-Reverse Feature: Instant Anti-Reverse Bearing Count: 8 Braid Capacity M/mm: 285/0.29 215/0.36 150/0.41     Braid Capacity Yd/Lb: 315/20 235/30 165/50     Braking System: Magnetic/Centifugal Color: None Drag Material: Carbon Drag Type: Star Drag Gear Ratio: 7.3:1 Mono Capacity M/mm: 220/0.32 190/0.35 155/0.38     Mono Capacity Yd/Lb: 240/12 210/14 170/17     Pre-Spooled Yd/Lb: Not Pre-Spooled Recovery Rate: 34" | 86cm     Reel Handle Position: Left Reel Size: LP Reel Spool Material: Aluminum Spare Spool Material: No Spare Spool

Bolt-On Fender Step Pad - 3" Left Hand/Right Hand This fender step pad is ideal for the do-it-yourselfer. Step pad can be welded or bolted to your trailer fender. Step pad can also be bolted to your trailer frame with u-bolts. U-bolts NOT included. Features: Galvanized Finish 12 Gauge Steel 1-3/16"H x 3"W x 15-1/4"L Left Hand/Right hand

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1315-4L - 4-Blade - 13.5" x 15 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1317-4L - 4-Blade - 13.25" x 17 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1319-4L - 4-Blade - 13" x 19 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.