4 Blade aluminum propeller for 60-140 horsepower engines with 13 tooth spline and thru hub exhaust. 4-1/4" Gear Case.

3 Blade aluminum propeller for Aquamatic (Long Hub) engines. AQ280 and AQ290. 17 tooth spline.

4 Blade aluminum propeller for 40-140 horsepower engines with 15 tooth spline and thru hub exhaust. 4-1/4" Gearcase.

4 Blade aluminum propeller for 40-140 horsepower outboards and 1.6L through 3.0L sterndives with 4-1/4" gear case, 13 tooth spline and thru hub exhaust.

4 Blade aluminum propeller for Yamaha 50-130 horsepower engines and Nissan/Tohatsu 60-140 horsepower engines. Both with 15 tooth spline, thru hub exhaust and 4-1/4" Gear Case.

4 Blade aluminum interchangeable hub propeller for 40-140 horsepower engines with thru hub exhaust, 4-1/4" gear case. Category D prop. Requires RBX™ hub kit for installation.

Marine Kettle® Charcoal Grill - 17" Our time tested original charcoal Marine Kettle® grill now has a hinged lid.  Made in the U.S.A., it is meticulously crafted of 100% 18-8 mirror polished stainless steel for maximum corrosion resistance.  Our rotating design allows you to determine which direction you would like the lid to open when grilling in windy conditions.  You obtain perfect results through use of the adjustable height cooking grill and the variable temperature control draft door assembly.  Our Marine Kettle® design allows oven type baking to enhance the grill flavor while retaining the natural juices of the food.  It will cook more food faster, on less grill area, than any other charcoal grill.  Safety and efficiency are obtained by closing the draft door and extinguishing the coals for future use.  Magma’s large selection of mounting options and accessories allows you to customize your grill for your specific on-board or on-shore application.   *Mount not included.  Features: Heat resistant "Stay Cool" plastic handle with air cooled supports Perfectly balanced hinged lid, won't slam shut Adjustable height cooking grill and variable draft door assembly, for superior temperature control Lower charcoal grate and sealed ash compartment Technical Specifications: Material - 18-8 mirror polished marine grade Stainless Steel Mounting Application - Marine Kettle® Mounts Primary Cooking Grate - 17" (38.1 cm)  Total Cooking Area - 227" Sq. In. (1464.5 sq. cm) Dimensions w/valve attached and lid/legs closed (L x W x H) - 17-1/8" x 17-3/4" x 12-1/8" (43.5 x  45.1 x 30.8 cm) Weight - 9.76 lb (3.6 kg) Fuel Type - Charcoal *Sold as an Individual

3 Blade aluminum propeller for Aquamatic (Long Hub) engines. AQ280 and AQ290. 17 tooth spline.

4 Blade aluminum propeller for Aquamatic (Long Hub) engines. AQ280 and AQ290. 17 tooth spline.

4 Blade aluminum propeller for Aquamatic (Long Hub) engines. AQ280 and AQ290. 17 tooth spline.

Marine Kettle® Gas Grill - 17" This grill was designed for economy without sacrificing functionality.  Made in the U.S.A. of 18-8 mirror polished stainless steel, it will give you the safety, durability and performance required of a marine grill.  It uses our time-tested, highly efficient radiant plate heat distribution system in conjunction with convection heating technology to achieve hot, even temperatures while using a minimum of fuel.  It comes to temperature very quickly and is great for searing steaks or just grilling up some burgers and dogs.  The patented swiveling turbo venturi tube allows you to adjust the control valve inboard, outboard, left or right wherever it is most convenient to you.  The turbo venturi tube in combination with the newly designed burner virtually eliminates blow-outs.  The control valve/regulator uses standard, disposable 1lb. propane fuel canisters, allows for quick, safe fuel canister exchanges or easily adapt to existing on-board LPG (propane) or CNG (natural gas) fuel systems.  The grill quickly disassembles without tools for easy clean-up.  Magma offers the largest section of mounting options (sold separately) to customize the grill for your needs, fuel canister (not included).  *Mount not included Features: Heat resistant "Stay Cool" plastic handle with air cooled supports Perfectly balanced hinged lid, won't slam shut Adjustable height cooking grill and variable draft door assembly, for superior temperature control Swiveling, windproof turbo venturi and control valve design virtually eliminates blow-outs and places the fuel and valve where it is convenient and allows safe and easy fuel changes Combination "easy-to-clean" grease catch pan/wind baffle keeps the wind gusts out while keeping the flames and grease in Uses standard, disposable 1lb propane canisters or adapts to on-board LPG (propane) or CNG (natural gas) systems Technical Specifications: Material - 18-8 mirror polished marine grade Stainless Steel Mounting Application - Marine Kettle® Mounts Primary Cooking Grate - 17" (38.1 cm)  Total Cooking Area - 227" Sq. In. (1464.5 sq. cm) Dimensions w/valve attached and lid/legs closed (L x W x H) - 17-1/8" x 17-3/4" x 12-1/8" (43.5 x  45.1 x 30.8 cm) Number of Burners - 1 Burner BTU 10,700 Weight - 9.76 lb (3.6 kg) Fuel Type - Gas Fuel Supply - Disposable 1-lb. (450 g) propane canisters or adapts to pre-regulated propane LPG (valve sold separately), or compressed natural gas CNG (valve sold separately) systems. *Sold as an Individual

3/8" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber. Features:  Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.681 / (mm) 17.3 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 2" / (mm) 50.8 Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10

PED4600-00 PedestalPod Uncut (Usable Face = 11.375"W x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Black PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.

Washer Flat M8 x 17 x 1.2mm - Stainless Steel 304 Features: Washer Flat M8 x 17 x 1.2mm Stainless Steel 304

Marine Electronics Box Heavy-Duty - Large - 30" x 17" x 11" This Tigress fiberglass box is perfect for storing electronics. Features: Stainless lock 1/2″ thick – door & frame 1 gas shock Specifications: Size (W x D x H): 30 x 17 x 11 inches