 |
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
6.30 |
|
 |
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
6.50 |
|
 |
Constructed with THV barrier layer to prevent permeation, polyester reinforcement and CPE weather and UV resistant cover. EPA and CARB compliant. Hose construction is easy to rig, clamp and maintains flexibility under a range of extreme environmental conditions. Gray color keeps hose cooler to help prevent vapor lock. For use in above deck primer bulb applications. Resistant to ethanol blend fuels. Not fire retardant. Meets SAE J1527 Type B1-15 requirements.
|
2.59 |
|
 |
Alcohol resistant, Priced per foot, Sold in 50' rolls only.
|
2.39 |
|
 |
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
168.00 |
|
 |
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
185.00 |
|
 |
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
195.00 |
|
 |
Constructed with THV barrier layer to prevent permeation, polyester reinforcement and CPE weather and UV resistant cover. EPA and CARB compliant. Hose construction is easy to rig, clamp and maintains flexibility under a range of extreme environmental conditions. Gray color keeps hose cooler to help prevent vapor lock. For use in above deck primer bulb applications. Resistant to ethanol blend fuels. Not fire retardant. Meets SAE J1527 Type B1-15 requirements.
|
2.79 |
|
 |
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
56.99 |
|
 |
Resists gasoline/alcohol blended fuel and is compounded for low permeation. Abrasion resistant and reinforced with wire helix imbedded between plies of HD synthetic cord. Primarily used for fuel fill (gas or diesel) and is for pleasure boats only. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA/CE Type Accepted standards.
|
17.00 |
|
 |
Standard Duplex Cable - Flat 16/2 AWG - 2 x 1mm² Red/Black -Sold by the Foot
Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.
|
0.44 |
|
 |
Fuel line hose for non-pressurized systems. Priced per foot, sold in 50' rolls only.
|
2.89 |
|
 |
Constructed with THV barrier layer to prevent permeation, polyester reinforcement and CPE weather and UV resistant cover. EPA and CARB compliant. Hose construction is easy to rig, clamp and maintains flexibility under a range of extreme environmental conditions. Gray color keeps hose cooler to help prevent vapor lock. For use in above deck primer bulb applications. Resistant to ethanol blend fuels. Not fire retardant. Meets SAE J1527 Type B1-15 requirements.
|
147.99 |
|
 |
Constructed with THV barrier layer to prevent permeation, polyester reinforcement and CPE weather and UV resistant cover. EPA and CARB compliant. Hose construction is easy to rig, clamp and maintains flexibility under a range of extreme environmental conditions. Gray color keeps hose cooler to help prevent vapor lock. For use in above deck primer bulb applications. Resistant to ethanol blend fuels. Not fire retardant. Meets SAE J1527 Type B1-15 requirements.
|
154.00 |
|
 |
Constructed with THV barrier layer to prevent permeation, polyester reinforcement and CPE weather and UV resistant cover. EPA and CARB compliant. Hose construction is easy to rig, clamp and maintains flexibility under a range of extreme environmental conditions. Gray color keeps hose cooler to help prevent vapor lock. For use in above deck primer bulb applications. Resistant to ethanol blend fuels. Not fire retardant. Meets SAE J1527 Type B1-15 requirements.
|
148.00 |
|
