|
Burks 22537-6.75 Pump Wet End Only
Please allow 3 to 4 weeks of lead time.
|
1999.00 |
|
|
BURKS 22537-7.56, Wet End Kit for Series G7-2-1/2
Pump kit Only* for all G7-2-1/2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22537-7.56 For assembly on motor with a 254-256JM Nema frame Motor (check motor specs.). Full size impeller is 7.56 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
3711.34 |
|
|
BURKS 09928-6.25, IMPELLER CENT G6 1 1/2
|
1470.84 |
|
|
BURKS 20158-6, REPAIR KIT FOR CT6M
Repair Kit for All CT6M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Impeller Locknut, and instructions.
|
1313.76 |
|
|
BURKS 20522-6, Repair Kit for All CS6M Series Pumps
Repair Kit for All CS6M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
|
1332.12 |
|
|
BURKS 21971-6.25, Wet End Kit for Series G6-1-1/2"
Pump kit Only* for all G6-1-1/2 Series, 143-184JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 21971-6.25 For assembly on motor with a 143-184JM Nema frame Motor (check motor specs.). Full size impeller is 6.25 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
1622.70 |
|
|
BURKS 21974-6.25, Wet End Kit for Series G6-2
Pump kit Only* for all G6-2 Series, 143-184JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 21974-6.25 For assembly on motor with a 143-184JM Nema frame Motor (check motor specs.). Full size impeller is 6.25 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
1789.20 |
|
|
BURKS 21994-6.25, Wet End Kit for Series GA6-1-1/2"
|
1302.30 |
|
|
BURKS 21996-6.25, Wet End Kit for Series GA6 2"
|
1737.90 |
|
|
BURKS 22377-6.25, WET END FOR G6-1 1/2"
Pump kit Only* for all G6-1-1/2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog #22377-6.25 For assembly on motor with a 213JM Nema frame Motor (check motor specs.). Full size impeller is 6.25 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
1691.10 |
|
|
BURKS 22403-6.25, WET END FOR 2" G6 PUMP
Pump kit Only* for all G6-2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22403-6.25 For assembly on motor with a 213-215JM Nema frame Motor (check motor specs.). Full size impeller is 6.25 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
1840.50 |
|
|
BURKS 22430-6.31, Wet End Kit for Series G6-2-1/2
Pump kit Only* for all G6-2-1/2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22430-6.31 For assembly on motor with a 213-215JM Nema frame Motor (check motor specs.). Full size impeller is 6.31 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
2316.68 |
|
|
BURKS 22850-6, Wet End Kits for Series CR6M Pumps
Repair Kit for All 3CR6M, A3CR6M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Impeller Locknut, and instructions.
|
728.28 |
|
|
BURKS SA21723-6-1, CR Series Pump Impeller
UNSPSC Code: 40150000
|
704.44 |
|
|
ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 Ohm
VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.
These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm. For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.
Features:
Connection - M4 Stud
Voltage: 6-24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.68 |
|