BURKS 22571-9.00, Wet End Kit for Series G9A-1-1/2 Pump kit Only* for all G9-1-1/2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22571-9.00 For assembly on motor with a 213-215JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.

BURKS 22609-9.00, Wet End Kit for Series G9-2 Pump kit Only* for all G9-2 Series, 254-256JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22609-9.00 For assembly on motor with a 254-256JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.

BURKS 22659-9.00, Wet End Kit for Series G9-2-1/2 Pump kit Only* for all G9-2-1/2 Series, 284-326JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22659-9.00 For assembly on motor with a 284-326JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.

BURKS 20522-9-MV REPAIR KIT FOR CS9MV Pumps The Burks 20522-9-MV is a repair kit for all CS9MV series pumps with Viton seal, comes with the impeller, raceway, Viton shaft seal, Viton o-ring gasket, suction sleeve, raceway screws, impeller locknut, shaft key and instructions.   There is a 6 to 8 week Lead Time from time of order.

BURKS 20522-9, REPAIR KIT FOR CS9M Repair Kit for All CS9M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.

Johnson 05-32-9 Electric Coil Johnson Electric Coil 32V

FINISH THOMPSON A101981-9 Housing - PVDF

Tuthill P606-9 Lock Nut

Tuthill P601-9 Ball Bearing

NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint! As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power. The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power. Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to! This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels. Order the NXL-M4 for insane power out on the water! Features: Hardware resistant to corrosion and UV Protection Coated 4 Layers PCB to prevent corrosion IPX5 Water Resistance Grade High Level Input For Radio Use Front cover to keep the controls safe to the elements LED Clip Indicator to easier adjustment Stable and Reliable Class D Circuit Design Sound Quality Verification Using AP Instruments Direct Insert Power and Speaker Terminals Short Circuit, Thermal, and Voltage Protection Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz - 20KHz  2 Ohm RMS Power Per Channel - 4 x 230W  4 Ohm RMS Power Per Channel - 4 x 150W  4 Ohm RMS Power Bridge Channel - 2 x 440W  Signal-to-Noise Ratio - >90dB  Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7" *Sold as an Individual

RAM® X-Grip®Wheelchair Seat Track Mount for 9"-10" Tablets This kit includes a C size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, pipe extension, and double socket arm, connect the RAM® X-Grip® universal holder for 9”-10” tablets. The spring-loaded RAM® X-Grip® provides a perfect fit for your tablet and can be easily adjusted to the ideal position. Specifications: Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" Included Mounting Hardware: (QTY. 2) #10-32 x 1/2" Machine Screw (QTY. 2) #10-32 T-Nut (3/8" x 5/8") (QTY. 2) #10-32 T-Nut (1/2" x 1") (QTY. 2) M4 x 12mm Machine Screw (QTY. 2) M4 x 20mm Machine Screw (QTY. 2) M4 Stainless Steel Washer (QTY. 2) M4 Nylock Nut Material: Powder Coated Marine Grade Aluminum & High Strength Composite

13mm High-Load Trolley with 2X M4 Tapped Holes This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions. Features: High-load trolley with two M4-tapped holes on top Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail Retaining clips keep ball bearings captive when the trolleys are removed for maintenance Specifications: Length (mm): 56 mm Length (in): 2-3/16 in Width (mm): 40 mm Width (in): 1-9/16 in Weight (g): 57 g Maximum Rated Load (kN): 1.4 kN Height (mm): 19 mm Height (in): 3/4 in Weight (oz): 2.01 oz Breaking Load (kN): 6.7 kN

RAM® Tab-Lock™ Holder for 9"-10.5" Tablets with Heavy Duty Cases The RAM-HOL-TABL20U consists of a spring loaded back plate, custom support cups and locking mechanism offers theft deterrence and unwanted tampering in public settings. This spring loaded design makes it easy to load and unload your iPad Air, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad Air secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Note: Product consists of holder only. Case not included.  Features: Spring-loaded, key locking holder secures most 9" tablets with heavy-duty cases; interchangeable end cups allow you to modify the holder when upgrading devices Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: Assembly Hardware (2) #8 x 5/8" Sheet Metal Screws (2) M4 x 32mm Machine Screws (2) M4 Nylock Nuts (2) Keys Holder Dimensions: Height Range: 9.25" - 12.125" Width Range: 6.55" - 7.43" Depth Range: .3" - .875" Specifications: Hole Pattern: 4-Hole AMPS 1.181" x 1.496" Materials: High strength composite

Alpha 9 Performance Display Alpha Performance Displays are the most versatile marine data displays. High-bright touchscreen instruments with wide view angles offer excellent visibility from anywhere onboard. Alpha's extensive data dashboard options and widgets make critical sailing, navigation, and engine data easy to interpret at a glance.   Alpha & Axiom Systems  Alpha Performance Displays are companion instruments for Raymarine Axiom chartplotters. A simple RayNet Ethernet cable between Axiom and the Alpha display gives Alpha access to Axiom's connected transducers and NMEA2000/SeaTalk NG devices.  Once paired with an Axiom network, users can customize and configure your Alpha display into a powerful performance sailing, navigation, and engine data instrument. High Visibility  Polarized sunglass-friendly displays with extra wide viewing angles, viewable on the mast or remote location Rugged Build Tested to the extreme and built with our exclusive HydroToughTM nano-coating that repels water and oils for reliable touchscreen control Fully Scaleable  A single power and data cable for fewer cables running through the deck and mast. Support for daisy-chaining up to 4 Alpha displays Tactical Awareness  Intuitively designed graphical instrument displays, aimed at enhancing tactical awareness and facilitating better decision-making on the water. SailPoint™ Target SailPoint™ mode provides you with a visual reference of the target wind angle, so you achieve your maximum VMG upwind or downwind Dynamic Wind The dynamic wind performance display provides automatic zoom to the most critical part of the instrument display based on wind direction. Other Features: 9 in. bright, high contrast sailing instrument display  Power cables sold separately  What’s in the Box: Alpha 9 performance display - 2 x mounting brackets Suncover Waterproof gasket Documentation pack 4 x Threaded studs, M4 x 40 mm 4 x Thumb nuts Physical Specifications: Width: 148.9 mm (5.86 in.) Height: 235.9 mm (9.29 in.) Depth: 34 mm (1.34 in.) Post Separation Distance: 5.71 mm (0.22 in) Weight: 1.18 kg (2.60 lbs) Power Specifications: Nominal Supply Voltage: 12 V / 24 V dc Operating Voltage Range: 10.8 V to 32 V dc Current: 1.02 A (nominal) @ 12 V dc / 0.52 A (nominal) @ 24 V dc Power Consumption: 12 W (maximum) Inline Fuse Rating: 8 A Thermal Breaker Rating: 8 A Network Specifications: Axiom: The Alpha Performance Displays require an Axiom Chartplotter in order to operate. Data Connections: 1 x Daisy-chain connector & 1 x Power / RayNet Ethernet connector Environmental Specifications: Operating Temperature Range: -25°C to +55°C (-13°F to +131°F) Storage Temperature Range: -30°C to +70°C (-22°F to +158°F) Relative Humidity: 93% Max Waterproof Rating: IPx6 and IPx7 Display Specifications:  Display Screen: 9 in. IPS TFT LCD     Brightness / Luminance: 1500 nits / 1500 cd/m2 Viewing Angles: Portrait — 85 + / 85 + & Landscape — 85 + / 85 + Resolution: 1280 (H) x 720 (V) PPI (Pixels Per Inch): 9 in. display — 163 PPI Color: 24-bit color (16.7 million colors) Refresh Rate: 60 Hz Conformance:  Europe, Australia & New Zealand: EN 60945:2002 Canada: ICES-003 USA: CFR47 Part 15 Japan / China: IACS section E10 Product Markings     UKCA, CE, Australian Tick, WEEE Directive, Industry Canada

We will Never Forget or Forgive 9/11 Memorial & Museum — New York, N.Y. An anniversary ceremony, held each year on Sept. 11, will take place at the 9/11 Memorial Plaza at the World Trade Center. The "Tribute in Light" public art installation will shine from dusk to dawn on the night of Sept. 11. Two beams of illuminated, blue light, symbolizing the Twin Towers, reach four miles into the sky and are visible within a 60-mile radius on a clear night.   The Pentagon — Washington, D.C. The Pentagon Memorial also holds its anniversary commemoration, and is the first national memorial dedicated to the terror attacks on 9/11. Each memorial unit consists of a cantilevered bench, a lighted, reflecting pool of water, and a tribute to each of the 184 Pentagon victims.   Flight 93 National Memorial — Shanksville, Pa. This year on Sept. 10, Flight 93 National Memorial will host a "soundbreaking" for the memorial's last element, the Tower of Voices. Once constructed, the tower will contain 40 different chimes to symbolize the eternal voices of the passengers and crew members of Flight 93.