Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4

Ampco BI8202801 NAB Impeller for KC2 1" X 3/4" See Literature to the right, as to Why NAB Impellers

Ampco ICPLUS316-250TC, 2.5" X 1.5" 316SS Fluid End Only The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.  

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Ampco Fluid End Aluminum Bronze Full Size

Ampco Kc2 1 1/2 X 1 1/4 Niaibz Fluid End  

MP Pump 23221 Series 30 Standard End Suction Centrifugal Pump End Only 1" x 3/4" NPT Ports, C apacity up to 45 GPM Total Head up to 40 feet S30PPK C: RR 1X3/4 CFR 5/8 3.25 IMP

ProPress 1" x 3/4" Copper Reducer - Double Press Connection - Smart Connect Technology Features: For use with ASTM B88 tubing Copper Press connection Components: EPDM sealing elements

MegaPress 1" x 3/4" Stainless Steel 304 Reducer - Double Press Connection - Smart Connect Technology Features: 304 stainless steel Press connection Components: FKM sealing elements

MegaPress 316 FKM Reducer - 1" x 3/4" Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components: FKM sealing elements, grip rings, separator rings

Applications for the TE-5.5K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   The TE-5.5K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals..  The TE-5.5K-MD may have been modified to handle these chemicals.     March Pump's industrial TE-5.5K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-5.5K-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V      3PH 230/460V 50/60HZ     Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Carbon Filled Kynar (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)

Applications for the TE-6K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.    March Pump's industrial TE-6K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.5 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-6K-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 38 GPM 113.5 LPM Max Head 49 FT 11 M Power .5 HP .372 KW Electrical 1PH 115/230V or 3PH 230/460V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Carbon Filled Kynar (Front Housing, Rear Housing, Impeller), Ceramic (Shaft, Thrust Washers), Viton (O-Ring), Carbon (Bushing) Motor Options Available in 1HP Explosion Proof  

Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim

Ampco AC114MD14T-S, Viton Pump End Only, with Max Impeller  

Ampco KC2-SS-30N18BCT 1 ½ x 1 ¼ SS Close Coupled Pump with 1hp motor at 1800rpm 3phase TEFC motor   Email or call for a shipping quote, ships frieght.  Two week lead time.