|
16" x 28" Rectangle Table Package - White Thread-Lock
Threadlock™ Rectangle Table Package
Features:
White table
Package Includes:
Tabletop (rectangular)
27″ Threadlock Table Post 3691027
Table Base: 3690001-SL
Table Mount: 3660704-L Surface Mount
*Warranty: 5 years
|
154.92 |
|
|
Thread-Lock™ Electrified Oval Table Package with LED Lights & USB Ports
Package Includes:
Thread-Lock™ Electric 3-Piece Package
2 RGB LED Lights x 2 USB 3.0/USB-C Combo Ports
LED Remote Controller - change the colors, brightness, and pattern of the LEDs
White oval table top 30″W x 18″H with 2 cup holders
Features:
Available in single-pack quantities complete in retail box
Requires 12-volt hard wire into a vessel with a 5 Amp fuse
5-Year Warranty
|
242.08 |
|
|
Solid Teak Pedestal Table Tops
Rectangle - 16" x 28" x 1-1/8" Thick
Solid teak table tops with finished, raised lip edge
Mounts to standard pedestal table hardware
Great lightweight, durable, portable table
User can add 3-7/8" diameter drinkholder cutouts
|
436.03 |
|
|
White Oval Table Package - 18" x 30" Threadlock
The oval tabletop package can be a great addition to any boat!
Package Includes:
Oval tabletop
27 in. ThreadlockTM Table Post 3691027
Table Base - 3690001-SL
Table Mount - 3660704-L
Surface Mount
*5-Year Limited Warranty
|
161.05 |
|
|
1" Ball Mount with 6.25" X 2" Rectangle Base & Diamond Base
The RAM-B-111-238U consists of a double socket arm, 2.43" x 1.31" diamond base and 6.25" x 2" rectangle base. The diamond base contains two holes 1.912" from center to center, positioned at both ends of the base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
Weight: 0.66 lbs.
|
32.00 |
|
|
1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)
The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
40.28 |
|
|
1" Diameter Ball Mount w/Short Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)
The RAM-B-111U-A consists of a short double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
31.63 |
|
|
KingPin™ 7" x 7" Stainless Steel Square Base (Threaded)
KingPin™ 7" L x 7" W Satin Stainless Steel Threaded Square Base with Nylon Bushing for 1-3/4" D Post (1630001) by Springfield Marine. Springfield Marine knows that comfort is important in marine seating. Whether behind the wheel for long passages in rough water; dropping a line in a quiet creek; or anywhere in between, Springfield Marine offers a wide range of configurations and options.
Features:
7" x 7" stainless steel base, with nylon bushing and satin finish
4" cup depth below the deck
Mount requires a 2-1/2" hole in the deck
Built to provide secure, hassle-free boat seat mounting
Specifications:
Post Diameter: 1-3/4"
Length: 7"
Width: 7"
Finish: Satin
Material: Stainless Steel
|
45.25 |
|
|
RAM 6.25" X 2" Rectangle Base with 1" Ball
The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-B-111BU is compatible with the following electronic devices:
Garmin GPSMAP 162
Garmin GPSMAP 168
Garmin GPSMAP 175
Garmin GPSMAP 180
Garmin GPSMAP 180C
Garmin GPSMAP 182
Garmin GPSMAP 185
Garmin GPSMAP 188
Garmin GPSMAP 232
Garmin GPSMAP 238
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
13.99 |
|
|
RAM 1.5" x 3" Rectangle Base with 1.5" Ball
The RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
13.74 |
|
|
11" x 3" Rectangle Universal Electronics Base with 2.25" Ball
The RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber "D" Ball Size
Weight: 1.25 lbs.
*Note: The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
45.34 |
|
|
Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting Base
The RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360° rotation.
Dimensions:
Overall length: 16.69"
Overall height: 8.577"
Height from bottom of base to top of knob: 4.89"
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag
|
96.13 |
|
|
Single 6" Swing Arm with 6.25" x 2" Rectangle Base and Vertical Mounting Base
The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation.
Max Weight Capacity:
10 lbs.
Dimensions:
Center of knob to center of ball socket: 6"
Overall length of swing arm assembly: 11.4375"
Overall height: 8.45"
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
73.36 |
|
|
RAM 2" x 3" Rectangle Base w/1" Ball
The RAM-B-202U-23 contains a 1" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.
|
17.42 |
|
|
RAM 2" x 4" Rectangle Base with 1.5" Ball
The RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.36 |
|