RVM-400 Stainless Steel Thru-Hull 0 Degree Deadrise & 8M Cable RVM-400 series stainless steel all-in-one through hull transducer brings the power and clarity of RealVision MAX technology to inboard and outboard powerboats. The RVM-400 series transducers are compatible with the RVM1600 sonar module and Axiom 2 Pro RVM chartplotters  The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 also has a built-in fast-response water temperature sensor for quick, accurate readings. The RVM-400 series transducers feature a rugged stainless steel through hull body suitable for fiberglass, wood, or metal hulls. The low-profile design slips effortlessly through the water without causing drag or cavitation.  The RVM-400 is a single, all-in-one transducer suitable for boats with a through-hull transducer mounting position with less than 5° hull deadrise.  *Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module Features: 600-Watt traditional CHIRP High-performance Down and SideVision ceramics High-speed housing with isolation plate 8M Cable 0° element for hulls with less than a 5° deadrise

RVM-420 Stainless Steel Thru-Hull Pair, 20 Degree Deadrise & 10M Cable The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings. The RVM-420 is a port and starboard transducer pair designed for boats with 15° to 25° of deadrise. Each transducer element is tilted at 20° to compensate for the hull deadrise.  The RVM-420 transducer pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.     *Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module Features: 600-Watt traditional CHIRP High-performance Down and SideVision ceramics High-speed housing with isolation plate 10M Cable RVM-420 port and starboard pair accommodates hulls with a deadrise between 15° and 25°

RVM-412 Stainless Steel Thru-Hull Pair, 12 Degree Deadrise & 10M Cable The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings. The RVM-412 pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.  The RVM-412 is a port and starboard transducer pair designed for boats with 5° to 15° of deadrise. Each transducer element is tilted at 12° to compensate for the hull deadrise.  *Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module Features: 600-Watt traditional CHIRP High-performance Down and SideVision ceramics High-speed housing with isolation plate 10M Cable RVM-412 port and starboard pair accommodates hulls with a deadrise between 5° and 15°

RV-400 Stainless Steel Thru-Hull RealVision 3D 0° The RV-400 brings RealVision 3D, CHIRP DownVision, SideVision and High Frequency CHIRP sonar into a low-profile stainless-steel housing. The RV-400 features rugged stainless steel through hull bodies suitable for fiberglass, wood or metal hulls. Each transducer comes with an isolation kit that creates separation between the stainless-steel transducer body and any dissimilar metal hulls, eliminating risk of galvanic corrosion. Ideal for inboard and outboard powerboats, the RealVision 3D Stainless Steel transducers are available as a single transducer for flat hulls or a split pair with Y-cable to accommodate deadrise angles up to 26°. The transducers also have a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, compensating automatically for vessel motion. You’ll enjoy crystal-clear imagery even in waves, swells, and when maneuvering.

SS164 Stainless Steel Thru-Hull - 0° Tilted Element - 1KW for CP370 Sounder Step up to a 1 kW—without a fairing! Airmar’s innovative Tilted Element™ technology to a higher power. The 1 kW, flush-mount, tilted element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot accomodate a high-performance fairing. The flush-mounted, stainless steel housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing providing the perfect vertical beam with maximum energy on what is directly below the boat. Features: Depth and fast-response water-temperature sensor 1 kW power for performance to 500 m (1640'), 50 kHz with a wide 22° beam, 200 kHz with a 6° beam Interfaces to any 600 W or 1 kW echosounder Engineered for center-console and trailered boats Low-profile protrusion - less than 6.35 mm (0.25") outside your hull Fixed 0° tilted version for 0° to 7° hull deadrise No affect on boats running performance Stainless steel transducer housing for use on all hull materials Recommended boat size: up to 11 m (35') Exclusive Xducer ID® technology

StructureScan™HD Sonar Stainless Steel Thru-Hull Transducer (Pair) w/Y-Cable LSS-2 Though Hull Transducers Thru-hull, Stainless Steel LSS-2 StructureScan® HD transducers, deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300'/92M and a wider range of 600'/183M side-to-side coverage. All StructureScan® HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz. These Stainless steel transducers from Airmar® are available only from Navico exclusively for StructureScan® HD and StructureScan® systems. These sturdy, Stainless steel transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ technology; includes a high-performance fairing that will give you Structure performance at speeds up to 35 mph; and feature a 30'/9M transducer cable.

RV-412 Stainless Steel Thru-Hull RealVision 3D 12° - Pair RV-412 RealVision Transducer Stainless Steel Split 12° Low-Profile TH 2M w/ Y-Cable and 8M Extension Cable brings RealVision 3D, CHIRP DownVision, SideVision and High Frequency CHIRP sonar into a low-profile stainless-steel housing. The RV-412 features rugged stainless steel through hull bodies suitable for fiberglass, wood or metal hulls. Each transducer comes with an isolation kit that creates separation between the stainless-steel transducer body and any dissimilar metal hulls, eliminating risk of galvanic corrosion. Ideal for inboard and outboard powerboats, the RealVision 3D Stainless Steel transducers are available as a single transducer for flat hulls or a split pair with Y-cable to accommodate deadrise angles up to 26°. The transducers also have a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, compensating automatically for vessel motion. You’ll enjoy crystal-clear imagery even in waves, swells, and when maneuvering.

556TID-LTD/12 Stainless Steel Thru-Hull 1kW - 12° Tilted Furuno's Stainless Steel Thru-Hull Transducer, 1 kW (10 Pin), 12-degree Tilted Element.  Airmar SS164 Housing Style Transducer. If a thru-hull flush-style, stainless steel transducer is called for, the 12-Degree Tilted Element 556TID-LTD/12 will accommodate a deadrise angle between 8° and 15°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation. Features: 1kW 50/200 kHz 20/6 degree Beam Angles Stainless Steel Thru Hull with Temperature 30 Foot Cable with 10-Pin Connector This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RV-420 Stainless Steel Thru-Hull RealVision 3D 20° - Pair RV-420 RealVision Transducer Stainless Steel Split 20° Low-Profile TH 2M with Y-Cable and 8M Extension Cable.

SS60 Stainless Steel Thru-Hull 20° Tilt, 50/200, 10-Pin Stainless Steel Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element. If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/20 will accommodate a deadrise angle between 16° and 24°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.  Features: 600 Watts 50/200 kHz 45/12 degree Beam Angles Stainless Steel Thru-Hull with Temperature 30' Cable with 10-Pin Connector

SS75M Stainless Steel Thru-Hull Chirp Transducer - 12° Tilt - Med Frequency Features: Frequency: Chirp 80 - 130 kHz Power Rating: 600 Watts Connector: 10 Pin Tilt: 12 Degree Deadrise of Hull: 8-15 Degrees This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SS75M Stainless Steel Thru-Hull Chirp Transducer - 20° Tilt - Med Frequency Features: Frequency: Chirp 80 - 130 kHz Power Rating: 600 Watts Connector: 10 Pin Tilt: 20 Degree Deadrise of Hull: 16-24 Degrees This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Intelliducer, NMEA 2000, Thru-Hull 0-12° deadrise Add sonar to your boat's marine instrumentation capabilities. This intelligent transducer determines water depth and temperature and sends the data to your NMEA 2000 device. This thru-hull version mounts on a 0-12° deadrise angle. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

StructureScan 3D® Stainless Steel Thru-Hull Transducer - Pair The Dual thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution. These transducers are designed for boats with steep or variable deadrise hull angles, for seamless display of SideScan and DownScan and 3D Imaging. As with transom-mount StructureScan 3D® transducer, the Dual thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination, plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right of coverage. These Dual thru-hull Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Dual thru-hull Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan, DownScan Imaging™ and 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speed; and feature a 30'(9M) transducer cable. **Note if you require a longer cable you will need 2 each 000-12752-001 transducer extension cable**

StructureScan 3D® Stainless Steel Thru-Hull Transducer - Single Lowrance and Simrad Yachting announce the release of new thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution. As with transom-mount StructureScan 3D® transducers, the thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right coverage. These Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ & 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speeds; and feature a 30'(9M) transducer cable. For boats with steep or variable deadrise hull angles, consumers must purchase the StructureScan® 3D Stainless Steel Thru-Hull Pair (000-13560-001).