|
Shoot Thru-Hull Pod with Remote Temp - 9-Pin
Navico 9-Pin 83/200 kHz shoot-thru or trolling-motor mount Skimmer® with remote temp sensor with blue connector.
|
90.13 |
|
|
Shoot Thru The Hull Pod - No Temp - 9-Pin
9-Pin 83/200 kHz shoot-thru or trolling-motor mount skimmer depth only
Works with Simrad, Lowrance and B & G Sounder units that have a 9 pin Connector
|
90.13 |
|
|
Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Bronze Thru-Hull with Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
245.33 |
|
|
Bronze Thru-Hull Transducer w/ Temp, 600w (8-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Bronze Thru-Hull with Temperature
30 Foot Cable with 8-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
245.33 |
|
|
B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & G
The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull.
Features:
Depth only or depth and temperature
600 W
Dual-frequency element: 50 kHz with a wide 45° beamwidth for performance to 353 m (1,200'), 200 kHz with a 12° beamwidth for performance to 206 m (700')
Right-angle cable exit saves space and protects the transducer if stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Low-profile, bronze housing has minimal drag
Plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials and deadrise angles
Specifications:
Weight: 0.9 kg (2.0 lb.)
Recommended Boat Length: Up to 8 m (25')
Hull Material: Fiberglass or wood
Hull Deadrise: Best performance through 7°. Can accommodate up to 12°.
Acoustic Window: Urethane
Hole Diameter: 51 mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 |
|
|
Shoot-Thru-Hull, wide cone angle, 200 kHz "POD" transducer with external temperature sensor.
|
81.02 |
|
|
|
|
|
Bronze Thru-Hull Speed and Temp Sensor (6-Pin)
Bronze Thru-Hull Speed and Temperature Sensor
6-Pin Connector
9-Meter Cable
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
229.09 |
|
|
Plastic Thru-Hull Speed and Temp Insert (6-Pin)
Plastic Thru-Hull Speed and Temperature Sensor
6-Pin Connector
9-Meter Cable
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
141.82 |
|
|
B260 Bronze Broadband Thru-Hull Transducer with Temp, Built-in Diplexer and Hi-Speed Fairing Block, 1kW (10-Pin)
526T-HDD Bronze Thru-Hull Transducer with Broadband Technology
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Bronze Thru-Hull with Temperature
10-Pin Connector
Ships with High-Speed Fairing Block, # AIR-033-391
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1493.33 |
|
|
PD-WBL
Trolling motor-mount or shoot-thru-hull, pod type transducer.
Works with: LCX-110C, LCX-111C HD, LCX-15CI, LCX-15CT, LCX-15MT, LCX-16CI, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, X102C, X125, X135, X5
|
81.02 |
|
|
B258 1kW Bronze Thru-Hull Depth/Temp with FB - 8-Pin
Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-22° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1343.99 |
|
|
B258 1kW Bronze Thru-Hull Depth/Temp w/FB - 8-Pin
Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-25° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
854.99 |
|
|
Airmar B175H 12° Tilt, 1kW CHIRP High, 130-210kHz Thru-Hull Transducer with Temp
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage.
The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies.
An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 1,200 ft; an operating frequency of 130-210 kHz; a beamwidth of 9-15 degrees; and a 8 to 15 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
989.99 |
|
|
556TID-HDD SS260 Stainless Steel Thru-Hull Transducer w/Temp and Fairing Block - 10 Pin
The SS260 is our best performing, stainless-steel, thru-hull stem for 1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for unparalleled deep-water performance and unmatched bottom and water-column detail. The SS260’s narrow beam gives crisp image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.
Standard Features
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
10-Pin Connector
High Speed Fairing Block included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1333.33 |
|