|
Busbar 150A 6P & Cover 6X 1/4" Terminals
Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.
We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.
|
33.66 |
|
|
Busbar 150A 4P & Cover 4X 1/4" Terminals
Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.
We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.
|
22.44 |
|
|
Busbar 250A 4P & Cover 4X 5/16" Terminals
Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.
We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
68.34 |
|
|
Stainless Steel Drain Cover - 3-1/4"
Stamped 304 Stainless Steel
|
4.49 |
|
|
4026 AC Isolation Cover - 5-1/4 x 3-3/4 x 3
Features:
Provides electrical insulation for exposed panel backs
Provides mechanical protection for panel backs protruding into lockers
Lightweight material is easily drilled for wire entrance and exit
Meets ABYC requirements for panels with combined AC and DC
Covers a panel, or other object, up to 5-1/4" long x 3-3/4" width x 3" deep
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.78 |
|
|
4027 AC Isolation Cover - 5-1/4 x 7-1/2x3
Features:
Provides electrical insulation for exposed panel backs
Provides mechanical protection for panel backs protruding into lockers
Lightweight material is easily drilled for wire entrance and exit
Meets ABYC requirements for panels with combined AC and DC
Covers a panel, or other object, 7-1/2" long x 5-1/4" wide, x 3" deep
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
27.01 |
|
|
March 893-10-1/4" 24V Pump W/ 1286-0002-0100
|
351.00 |
|
|
BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT
Bronze Fitted Cast Iron Construction.
Base mounted Pump Only less Motor.
Ports are Inches NPT Inlet, Inches NPT Outlet.
UNSPSC Code: 40150000
|
1987.20 |
|
|
BURKS T310GA5-1 1/4, CENTRIFUGAL PUMP 3PH 1HP TEFC
Close Coupled, 60 Hz, Three Phase, 3500 RPM, 1 Horsepower, TEFC Motor Enclosure, Frame Size 56J.
UNSPSC Code: 40150000
|
1832.40 |
|
|
Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame
|
1794.96 |
|
|
Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female
Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports
|
20.36 |
|
|
BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH
Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.
|
1605.60 |
|
|
BURKS 320G6-1 1/4, CENTRIFUGAL PUMP 230/460v 3PH 2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.13 Inches
|
2059.20 |
|
|
BURKS 330GA6-1 1/4, Centrifugal Pump 230/460v 3PH 3HP
Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.5 Inches.
|
2183.40 |
|
|
BURKS 35G5-1 1/4, Centrifugal Pump 3PH 1/2HP 230/460v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.63 Inches.
UNSPSC Code: 40150000
|
1565.10 |
|