 |
HTM-4 Fender 13.5" x 34.8" - Graphite
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
*Sold as an Individual
|
161.56 |
 |
Polyform HTM-4 Fender 13.5" x 34.8" - White with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
162.11 |
 |
HTM-4 Fender 13.5" x 34.8" - Black w/Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
162.11 |
 |
HTM-4 Fender 13.5" x 34.8" - Blue with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
162.11 |
 |
HTM-4 Fender 13.5" x 34.8" - Black
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
*Sold as an Individual
|
161.56 |
 |
HTM-4 Fender 13.5" x 34.8" - Blue
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
*Sold as an Individual
|
161.56 |
 |
HTM-4 Fender 13.5" x 34.8" - White
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
*Sold as an Individual
|
161.56 |
 |
G-1 Twin Eye Fender 3.5" x 12.8" - Graphite
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.
The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Hangs vertically or horizontally
Unique Polyform valve for years of service
Technical Specifications:
Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm)
Eye Diameter - 0.375" (1 cm)
Circumference - 11" (27.9 cm)
Volume - 0.4 gallons (1.5 L)
Boat Size - Up to 10' (3 M)
Weight - .7 lb
*Sold as an Individual
|
9.59 |
 |
HTM-3 Fender 10.5" x 27" - Graphite
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
*Sold as an Individual
|
109.48 |
 |
HTM-3 Fender 10.5" x 27" - Orange
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
*Sold as an Individual
|
109.48 |
 |
HTM-3 Fender 10.5" x 27" - Black with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
110.03 |
 |
HTM-3 Fender 10.5" x 27" - Blue with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
110.03 |
 |
HTM-3 Fender 10.5" x 27" - White with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
110.03 |
 |
HTM-3 Fender 10.5" x 27" - Black
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
*Sold as an Individual
|
109.48 |
 |
HTM-3 Fender 10.5" x 27" - Blue
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
*Sold as an Individual
|
109.48 |
...
