B744V 50/200 kHz Smart xSonic 9-Pin TH with Fairing Block Bronze Thru-Hull with High-Speed fairing block. The Lowrance Bronze Thru-Hull, style B744V, 600w, multisensor provides accurate depth, speed, and temp readings and comes with a High-Speed Fairing Block. The high-speed fairing block provides a streamlined installation and allows for a vertical beam. Compatible with Lowrance HDS, HDS Gen2, HDS Gen2 Touch, HDS Gen3, Lowrance BSM-1, Lowrance Hook, Simrad NSS, Simrad NSS evo2, and Simrad BSM-1.

B45 Bronze Thru-Hull with Fairing Block - 50/200 kHz - 600W - 9-Pin Connector (xSonic) The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element. The included fairing streamlines the transducer and increases the performance—even at higher speeds. Features The depth and fast-response water-temperature sensing 600 W of power Dual-frequency element: 50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200') 200 kHz with a 12° beamwidth for depth performance to 206 m (700') Excellent performance and sensitivity in a small housing Bronze housing with High-performance Fairing for optimal performance at speed Specifications Acoustic Window: Urethane Cable-Length: 10 m (33') Common Use: Cruising/Racing Sailboats, Leisure/Yachting, Fishing Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin Conventional Beam: 45°/12° Country of Origin: USA Cross Reference: 000-13946-001 Deadrise Range: Up to 28° with fairing Display Connector: 9N Frequency Band: 50/200 kHz Hole Size: 22 mm (7/8") Housing Material: Bronze Hull Material: Fiberglass or wood Max Deadrise: Up to 26° with fairing Max Deadrise Angle: 26° Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700') Max Vessel LOA: Up to 9 m (30') Mix and Match Series: 5-Pin 600 Watt Mounting Style: Thru-Hull with Fairing Power Rating: 600 W Sensor Connector: MM Single or Dual Frequency: Conventional Dual Frequency Tilted Element: No Transducer Functions: Depth, Temperature Usable Shaft Length: 92 mm (3.62") Weight: 2.5 kg (5.5 lb.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

xSonic R509LH-W Thru-Hull Wide-Beam CHIRP w/Fairing Block Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered. Features: Depth & fast response water-temperature sensor CHIRPs across the following bandwidths: Low Frequency 28 to 60 kHz High Frequency 150 to 250 kHz 25 internal Broadband Ceramics Epoxy housing with stuffing tube and high-performace fairing Boat size: 12M (40’) Hull Type — Fiberglass, Wood, Metal Can retrofit to existing R209 install Exclusive Xducer ID® technology Specifications: Hull Deadrise: 0° to 25° Acoustic Window: Epoxy/urethane Weight: 20.8kg (46lb)

B45-DT-HB 600W Thru-Hull Transducer w/Fairing Block & Humminbird #9 Connector The B45 is our smallest and most economical, dual-frequency, bronze, stem transducer. Its streamlined shape and High Performance fairing block deflects aerated water from the transducer's face for strong return echoes and clear display images.  Features: Bronze housing Depth and Temperature Recommended for planing-hull powerboats and cruising sailboats up to 9 m (30’) Good sensitivity in a compact housing Fast-response water-temperature sensor provides ±0.2°C (±0.1°F) High-Performance Fairing included Usable Shaft Length: 92 mm (3.62”) Standard fairing block  Frequency: 50/200 kHz Maximum Depth Range: 50 kHz—235 m to 353 m (800’ to 1,200’) 200 kHz—118 m to 206 m (400’ to 700’) Cone: 50 kHz—45°, 200 kHz—12° RMS Power: 600 W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

xSonic Bronze 12° HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature 12 degree tilt 10M Cable Beam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°

xSonic Bronze 0° HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature 0 degree tilt 10M Cable Beam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°

SI-TEX 496/50/200ST Bronze Thru-Hull Transducer w/ Fairing Block f/ ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Bronze Mount: Through Hull Plug: 8 pin Cable: 30' Temp: Yes Speed: Yes For SI-TEX model: ES502

xSonic Bronze 20° HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature 20 degree tilt 10M Cable Beam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°

B785C-M CHIRP Bronze Thru-Hull w/Fairing Block - 600W Features: Thru-hull bronze model with fairing Same physical size as a B744V  600W power rating Depth and fast-response water temperature sensor Available only in the Medium frequency band (M : 80-130kHz) with bare wire cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rubber Coated Transducer, w/ Fairing Block, 1kW (No Plug) 1 kW 50 kHz 28 degree Beam Angle 6.6 lbs. Rubber Coated with Fairing Block 15-Meter Cable, no connector provided May be used for 75 kHz frequency setting feature, available only in FCV1100/1200 and FCV1200BB WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B75H 20° Bronze Thru-Hull CHIRP xSonic 9-Pin The B75H is a bronze, thru-hull, tilted, high-frequency (130-210kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.  Features: CHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures Depth/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings Easy To Install High Frequency - CHIRP range is 130kHz-210kHz for good target detail in shallow water and excellent bottom tracking in deep water Highly Accurate - Provides extremely accurate data 20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise Low Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull Plug & Play Connection - Easily connect to NSS, NSE, NSO or Lowrance

HDI SSkimmer Low/High 50/200/455/800kHz Transom Mount 9-Pin Transducer 9-Pin Transom Mount Transducer HDI Skimmer transducer 50/200/455/800kHz with built in temp. Includes mounting bracket and hardware. Cable Length 6M (20') Hybrid Dual Imaging (HDI) transducer (50/200/455/800) - The power of two award-winning technologies -- Broadband Sounder PLUS Exclusive DownScan Imaging-- combined to provide the best-possible view beneath your boat.

xSonic P319 Plastic Low Profile TH 50/200 9-Pin 600W Connector - 10M Cable The P319 is a compact, plastic, thru-hull, dual-frequency (50/200 kHz) sensor that offers depth and temperature data. Ideal for planing hull powerboats and sailboats. Depth/Temperature Requires just one hole in the hull to receive data for both depth and temperature Dual Frequency Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water Highly Accurate Provides extremely accurate data Low Profile Just 5mm extends outside of the hull Specifications: Frequency: 50/200 kHz Power Rating: 600W Speed Sensor: No Temperature Sensor: No Mounting Style: Plastic Thru-Hull Elements: 1 Beamwidth @ -3dB: 45 (50 kHz) 12 (200 kHz)

B60 Thru-Hull Transducer 20° Tilt 9-Pin for Navico xSonic The B60 is a 600W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at a 20° angle within the housing. When the transducer is installed almost flush with the hull, the tilt of the element corrects for the hull deadrise angle. Orienting the beam directly down ensures maximum echo returns to the transducer for more accurate depth readings. Features: Depth and fast-response water temperature sensing 600 W of power Dual-frequency element: 50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200') 200 kHz with a 12° beamwidth for depth performance to 206 m (700') Perfect for center-console or trailered boats Low-profile bronze housing extends only 5 mm (3/16") outside the hull No effect on your boat’s running performance Bronze housing for fiberglass or wood hull Also available in a stainless steel housing (SS60) for use with all hull materials Specifications: Power Rating: 600 W Max Deadrise Angle: 24° Housing: Bronze Functions: Depth, Temperature Hull Material: Fiberglass or wood Max Vessel LOA: Up to 8 m (26') Hole Size: 60 mm (2-3/8") Usable Shaft Length: 68.5 mm (2.70") Acoustic Window: Urethane Common Use: Leisure/Yachting, Fishing Conventional Beam: 45°/12° Max Deadrise: Up to 24° Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700') Mounting Style: Tilted Element Thru-Hull Retractable housing: No Single or Dual Frequency: Conventional Dual Frequency Tilted Element: Yes Weight: 1.4 kg (3 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B744V 600 Watt Bronze thru hull transducer with depth, speed, and temperature. Compatible with the following sounder modules: DSM30 DSM300 Compatible hull material: Wood and fiberglass Max power: 600 W Frequency: 200/50 kHz Cable: 30ft (10m) cable with connector Hole diameter for installation: 2" Other: Self-sealing removable paddle wheel insert. Includes high speed fairing block.