|
ShadeFin Adjustable Rod Holder Mount
Lightweight and versatile, the Adjustable Rod Holder Mount for ShadeFin makes adding shade to your boat easy! Sliding the gimbal-slot butt end over the rod holder’s gimbal pin makes a secure, quick connection. A beveled, nylon sleeve is included, in the instance the rod holder opening is oversized for the mount’s shaft. Verify that the gimbal slot on the mount is mated with the pin in the rod holder, or Adjustable Telescopic Gunnel-Mount, insert the ShadeFin, adjust to your preferred shade angle and enjoy.
Features:
Manufactured from Type-316L stainless steel
Features soft-touch knob for easy and secure angle adjustment
Adjusts every 15º with safety detents
Gimbal-slot butt end for secure rod holder placement
Features white nylon sleeve for additional rod holder stabilization
Includes self-aligning notch and pin-locking hole
1-year limited warranty
|
318.43 |
|
|
ShadeFin™ Telescopic Rod Holder Mount
Wherever you are onboard, ShadeFin can follow! The Telescopic Rod Holder Accessory for ShadeFin – a versatile attachment option that inserts into standard gunnel rod holders for portable, adjustable boat shade. Made from high-quality, lightweight anodized aluminum, the Telescopic Rod Holder Accessory extends from 42" to 67" tall – elevating ShadeFin over the deck for boaters to comfortably stand underneath. For boaters at the dock, sandbar, or in the water, the Telescopic Rod Holder Accessory can also be adjusted to position ShadeFin over the side of the boat – keeping you protected from the sun.
Easily Adjustable
As the sun changes position, the angle and height of this accessory can easily be adjusted at two points along its body – the bottom joint and the throw latch. Toward the base, the bottom joint features a Sure-Grip Knob and Pull Pin Lock that enables the adjustment of the accessory's upward angle. The throw latch half-way up the body is used to adjust the height and 360° rotation of the ShadeFin. If using this accessory with the Adjustable Rod Holder Mount, the angle of ShadeFin can also be adjusted from the Sure-Grip Knob at the top.
Operation
To use the Telescopic Rod Holder Accessory, simply insert the solid gimbal butt into any standard rod holder on the gunnel, remove the Pull-Pin, adjust the upward angle using the Sure-Grip Knob at the bottom joint to the desired 0°, 15°, or 30°, and reinstall the Pull Pin. Then, at the top, simply insert the Fixed or Adjustable Rod Holder Mount into the opening. The mount will secure in place when its gimbal butt seats into the Accessory gimbal pin. Then attach ShadeFin into the Mount, as directed in the Instruction Manual, and deploy. Use the throw latch to adjust the ShadeFin height and horizontal rotation.
Features:
Features Sure-Grip Knob at the joint with a secure Pull Pin Lock
Features a throw latch for secure height adjustment from 42" to 67"
Features solid aluminum gimbal butt and internal Delrin bearings
High-quality drawn aluminum tube
Pairs with T10-3000-5 or T10-3000-6 at the top sold separately
1-year limited warranty
|
318.43 |
|
|
ShadeFin Mini Rod Holder Mount
Designed for standard rod holders, the ShadeFin Mini Rod Holder Mount is a simple solution for adding boat shade onboard. Simply insert the mount at the bottom edge of the post, tighten it until snug, and attach ShadeFin Mini. The ShadeFin mini rod holder mount can safely remain in the rod holder when not in use or be easily removed by loosening and stowing.
Features and Benefits:
Fits standard rod holders with an inside diameter of 1.75" or greater
Constructed out of aluminum-grade 6061 alloys
Includes a stainless steel Type-304 threaded rod with an injection-molded nylon cap
3-year limited warranty
Specifications:
Finish: powder-coated, misty silver
Length (inch): 9-1/4"
|
60.65 |
|
|
ShadeFin Fixed Rod Holder Mount
Enjoy your ShadeFin in any standard rod holder with our Fixed Rod Holder Mount. Simply install by inserting the Fixed Rod Holder Mount into a firmly welded rod holder. Sliding the gimbal-slot butt end over the rod holder’s gimbal pin with the open end out makes a secure, quick connection. A beveled, nylon sleeve is included, in the instance the rod holder opening is oversized for the mount’s shaft. Verify that the gimbal slot on the mount is mated with the pin in the rod holder or Telescopic Rod Holder Mount, attach the ShadeFin and enjoy!
Features:
Manufactured from high-polished Type-304 stainless steel
Gimbal-slot butt end for secure rod holder placement
Features white nylon sleeve for additional rod holder stabilization
Includes self-aligning notch and pin-locking hole
1-year limited warranty
|
197.03 |
|
|
ShadeFin with Black Fabric, Case & Fixed Rod Holder Mount Kit
Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat.
ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.
ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling.
Features:
Light, compact and portable
Easily mounts into any standard rod holder
Kit comes with a Fixed Rod Holder Mount
Adjustable Rod Holder Mount options available
Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube
Large coverage area of 5’ X 6’
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
|
1679.99 |
|
|
ShadeFin with White Fabric, Case & Fixed Rod Holder Mount Kit
Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat.
ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.
ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling.
Features:
Light, compact and portable
Easily mounts into any standard rod holder
Kit comes with a Fixed Rod Holder Mount
Adjustable Rod Holder Mount options available
Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube
Large coverage area of 5’ X 6’
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
|
1679.99 |
|
|
ShadeFin with White Fabric & Case
Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat.
ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.
ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling.
Features:
Light, compact and portable
Easily mounts into any standard rod holder
Fixed & Adjustable Rod Holder Mount options available
Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube
Large coverage area of 5’ X 6’
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
|
1559.99 |
|
|
ShadeFin with Black Fabric & Case
Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat.
ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.
ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling.
Features:
Light, compact and portable
Easily mounts into any standard rod holder
Fixed & Adjustable Rod Holder Mount options available
Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube
Large coverage area of 5’ X 6’
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
|
1559.99 |
|
|
ShadeFin Fixed Clamp-On Mount
For boats with minimal or no rod holders, mount your ShadeFin to 3/4" or 1" schedule-40 pipe or 1-1/4" O.D. tube with the Fixed Clamp-On Mount. This is a secure and economical mount manufactured from Type-316L polished stainless steel. It's easy to install and comes with a guide notch for accurate ShadeFin placement.
Features:
Easily installed on your existing T-top piping
Polished, Type-316L stainless steel
Includes self-aligning notch and pin-locking hole
Made in the USA
1-year limited warranty
|
135.32 |
|
|
Adjustable All-Angle Fish Rod Holder Mounted Kayak/SUP Rack
No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.
With Magma’s Fish Rod Holder Mounted Removable Kayak / SUP Rack your problems are solved. This convenient storage rack, easily attaches to most standard fish rod holders, has been constructed from 1” Dia., 304 marine grade Stainless Steel tubing, aircraft quality hard anodized 356 aluminum, and includes stainless steel attachment fasteners.
Designed to fit most standard fish rod holders up to 1-1/2” (38mm) inside diameter and is wide enough to fit all of the most popular kayak or board sizes. Magma’s patented LeveLock® all-angle adjustable mounting bracket and the Pow’rGrip adjustable quick release rod holder system allows each arm to be instantly installed and adjusted without tools. Each arm comes with pre-installed UV resistant padding and has two tie-down attachment points for securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.
Whether you’re new to water sports or a seasoned veteran, this rack is a must have for the paddling enthusiast who’s always on the go.
Features:
Holds a single kayak or 2 or more standard SUP’s
Allows quick installation or removal without tools for convenient storage
Technical Specifications:
Material - 304 Marine grade Stainless Steel
Bracket Height (w/o mount) - 26.84" (68.18 cm)
Weight (Pair) - 12.4 lbs (5.63 kg)
*Sold as a Pair
|
419.99 |
|
|
Adjustable Grill Rod Holder Mount
The Kuuma Pivoting Rod Holder Mount fits securely into any 1-5/8" I.D., flush mount fishing rod holder and instantly converts it to a fully adjustable grill mount.
The stainless inner tube telescopes out of the anodized aluminum outer tube making the overall height adjustable from 14.8" to 18.8". The mounting plate is compatible with all Kuuma grills, as well as most rectangle-style Magma grills (Magma and Kuuma grill mounting hardware included).
The mounting plate swivels around a ball joint, making it freely adjustable to whichever angle best suits your grilling needs. Both the telescoping tube and swiveling mounting plate feature a tension clamp, keeping the Rod Holder Mount securely locked in the position you choose.
Compatible With:
All Kuuma grills
Features:
Fits into 1-5/8" I.D. fishing rod holders of all angles to create a level grill mount
Mounting plate pivots and rotates 360-degrees around ball joint
Stainless Steel inner tube telescopes out 4-inches
Tension clamps securely locks the pivoting and telescoping joint
Rugged reinforced nylon, anodized aluminum and Stainless Steel construction
*Sold as an Indivudual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
72.10 |
|
|
Adjustable Rod Holder Extender
Provides the option for you to position your Scotty Rod Holder into that perfect fish fighting location. Conveniently position your rod holder closer to you on your kayak or your downrigger to eliminate reaching for your rod. Can be used in conjunction with any previous Scotty Downrigger Boom Mounted Rod Holder to bring the fish fighting action closer to you.
Extends the height of a rod holder by 6-1/2"
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
15.17 |
|
|
Triple Rod Holders
Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.
Triple Rod Holder Mount Includes Mounting bracket
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
40.51 |
|
|
Pow'r Grip LeveLock Double Locking Fish Rod Holder Mount
Just when you thought it couldn't get any better.....this mount adjusts and locks in place at both ends. We've joined the "LeveLock" Adjustable Fish Rod Holder Mount, with the "Pow'rGrip" Adjustable Fish Rod Holder Mount.
This allows the "Pow'rGrip" portion of the mount to adjust to any size rod holder and lock in place, while the "LeveLock" portion of the mount, adjusts and locks your Magma rectangular grill.
This mount is the strongest, most corrosion resistant, most versatile mount in the industry.
Compatible With:
Rectangular Grills and Single Mount Tables
Technical Specifications:
Material - 18-8 Stainless Steel and 356 Anodized Aluminum
Dimensions W x H) - 3-5/8" x 8" (9.3 x 20.3 cm)
Weight - 1.77 lb (.81 kg)
*Sold as an Individual
|
131.99 |
|
|
Heavy-Duty Adjustable Rod Holder with Combo Mount - White
This rod holder is designed for use with baitcasting and spinning reels.
Features:
An ergonomic design and easy-to-find rapid-release latch
Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings
Specifications:
Color: White
*Sold as an Individual
|
18.29 |
|