|
TM275LHW Transom Mount CHIRP Transducer with Temp - 12-Pin Connector for TZT3
The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the TM275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.
The TM275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.
Features:
Plastic
Transom Mount CHIRP Transducer with Temp
Low Freq: 42-65 kHz
High Freq: 150-250 kHz
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1920.00 |
|
|
GT51M-TM Transom Mount DownVü/SideVü 500W (CHIRP 260/455 kHz) Traditional 600W Mid-Band CHIRP 80-160 kHz Transducer with Temp - 12-Pin
The GT51M-TM transom mount transducer provides ultra-clear sonar pictures of objects, structure and fish that pass below your boat. This traditional CHIRP and CHIRP DownVü/SideVü transducer is optimized for depth performance and rough condidtions.
The CHIRP DownVü/SideVü elements have a power rating of 500W per element (1,500W total) and operating frequencies of 260/455 kHz. The traditional CHIRP sonar has a power rating of 600W and operating frequencies of mid-band CHIRP 80-160 kHz. It also includes a built-in fast response temperature sensor.
GT51M-TM includes a 12-pin transducer with mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
566.99 |
|
|
TM185M Medium-Frequency CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket
Features:
Frequency: Chirp 85 - 135 kHz
Power Rating: 1KW
Connector: 10 Pin
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1066.67 |
|
|
TM185HW High Wide CHIRP Transducer with Temp Transom Mount
High-Frequency, Wide-Beam CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket
Features:
Power Rating: 1kW
Function: Depth,Temperature
Frequency: CHIRP 150-250 kHz
Mount Style: Transom
Install Type: Transom Mount
Housing Type: Urethane
Housing Material: Urethane/Stainless Bracket
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1280.00 |
|
|
Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer w/Temp - 4-Pin
Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer.
This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and a 0 to 70 transom angle.
Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
89.99 |
|
|
GT20-TM Transom Mount DownVü 500W (CHIRP 455/800kHz); Traditional 500W (77/200kHz) Transducer w/Temp - 8-Pin
Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 8-pin transducer.
This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and 0 to 70 transom angle.
Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
89.99 |
|
|
B285M Medium-Frequency CHIRP Transducer with Temperature - Bronze Thru-Hull with High Speed Fairing Block
Features:
Frequency: Chirp 85 - 135 kHz
Power Rating: 1 KW
Connector: 10 Pin
Fairing Block: High Speed Fairing Block Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1386.67 |
|
|
CPT-100 DVS Transom Mount CHIRP Transducer
Installation: Transom Mount
Material: Urethane
Max Depth (Ft): DV=600 | FF=900
Frequency (KHz): CHIRP DownVision | CHIRP DownVision / Fishfinder
Beam Width (L/H) 25°/60°
Records: Depth / Temperature
Approved Hull Material: Fibreglass / Wood / Metal
Cable Length (Ft/M): 33'/10M
Deadrise: 0-90° Transom
|
118.80 |
|
|
M265LH Plastic In-Hull Mount Transducer w/Depth - 12-Pin
Garmn's best performing 1 kW in-hull, this narrow beam transducer provides crisp image detail.
The transducer has a depth of 3,000 feet; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees or 6 to 10 degrees; and a 0 to 30 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
*Not recommended for cored-hull vessels
Compatible Devices:
GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv, 7616xsv
GSD™ 25 Premium Sonar Module
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1331.99 |
|
|
TM265C-LM-12F Transom Mount Transducer with 12-Pin Connector for Furuno TZT12F, TZT16F & TZT19F
Rely on Airmar's broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fishfinders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, CHIRP uses a precise sweep pattern of many frequencies within a long-duration transmits pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fishfinder.
Specifically designed for smaller boats (25'-40'), the TM265C-LM CHIRPS across the following bandwidths:
Low & Medium-Frequency (LM)
Low—Chirps from 42 kHz to 65 kHz, 25° to 16° beamwidth
Medium—Chirps from 85 kHz to 135 kHz, 16° to 11° beamwidth
Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency
Features:
8-Internal, Broadband Ceramic Elements
Depth & fast-response water-temperature sensor
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Operating frequencies:
Low—Chirps from 42 kHz to 65 kHz
Medium—Chirps from 85 kHz to 135 kHz
Beamwidth (Adjustable):
Low—25° to 16°
Medium—24° to 16°
10 m (33’) cable
The depth and fast-response water-temperature sensor
12 Pin Connector for use with Furuno TZT12F and TZT16F Displays
Urethane transducer housing and stainless steel mounting bracket
Boat Size: 8 m to 12 m (25’ to 40’)
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1852.50 |
|
|
PM265LH Bronze Pocket Mount CHIRP Transducer - 12-Pin
Bronze, Pocket Mount CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 130-210 kHz.
The PM265LH is a bronze CHIRP transducer with Temp for use with Furuno's CHIRP broadband Fish Finders.Its flat-faced design is ideal for pocket/keel-mount installations.
Traditional marine Fish Finders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short-duration transmit pulses, and use narrowband sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine Fish Finder. The echo energy returning to the transducer is likewise superior to that generated by a conventional transducer. The combination of CHIRP, a broadband transducer, and Furuno’s superior Digital Signal Processing, results in dramatically increased fish and bottom detection.
The PM265LH CHIRPS across the following bandwidths:
Low-Frequency: 42-65 kHz
High-Frequency: 130-210 kHz
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1706.66 |
|
|
PM275LHW Bronze Pocket Mount CHIRP Transducer - 12-Pin
Bronze, Pocket Mount CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freg: 150-250kHz.
The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the pocket mounted PM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the PM275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.
The PM275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2026.67 |
|
|
Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Plastic Transom Mount with Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
128.00 |
|
|
XNT-9-HW-MSI-150-T MEGA SI/DI Dual Spectrum CHIRP Transducer with Temp f/HELIX® 7/8 MEGA SI
Transom Mount, MEGA Down Imaging, 455 kHz and 1.2 MHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature. Compatible with: HELIX 7 CHIRP MEGA SI GPS G3/G4, HELIX 7 CHIRP MEGA SI GPS G3N/G4N.
Features:
Compatible with: HELIX 7 CHIRP MSI GPS G3, HELIX 7 CHIRP MSI GPS G3N, HELIX 7 CHIRP MSI GPS G4, HELIX 7 CHIRP MSI GPS G4N
Cable Length: 20 Feet
Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHIRP Max Depth: 1200ft (365m)
Side Imaging Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (146m), MEGA SI: 1075-1150 kHz - 250ft (76m)
Down Imaging Frequencies - Max Depth: 455kHz: 440-500 kHz - 125ft (38m), MEGA DI: 1075-1150 kHz - 75ft (23m)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
200.00 |
|
|
Side Scan Transom Mount for TZT3
The 225T-TM904 is a Transom Mount transducer that works with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD.
Features:
150 watts on each side
CHIRP 220-240kHz
Transom Mount with Temperature
12-pin connector
12m (40ft) cable
Mounting bracket and hardware included
Specifications:
Install Type: Transom Mount
Housing Type: Urethane
|
693.34 |
|