|
2" Thru-Hull Depth/Temp Transducer
Specifications:
Built in temperature sensor
Include 26' cable
Bare wire connection
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
138.60 |
|
|
xSonic SS60 Stainless Steel 20° Tilt Thru-Hull Depth/Temp Transducer - 9-Pin - 10M Cable
The SS60 is a stainless steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Features:
Depth/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings
Easy To Install
Dual Frequency - Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate - Provides extremely accurate data
20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise
Low Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull
Plug & Play Connection - Easily connect to NSSevo3, Lowrance HDS G3
|
403.61 |
|
|
B117 Bronze Thru-Hull Depth/Temp - 8-Pin
This bronze thru-hull mount transducer performs well at high speeds.
An excellent choice for fiberglass and wood hulls, this 8-pin 600 W narrow stem transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Do not use on metal hulls.
When using with a 6-pin Garmin sounder, a transducer adapter cable is required
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
260.99 |
|
|
B258 1kW Bronze Thru-Hull Depth/Temp with FB - 8-Pin
Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-22° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1343.99 |
|
|
B258 1kW Bronze Thru-Hull Depth/Temp w/FB - 8-Pin
Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-25° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
854.99 |
|
|
B265LM Bronze CHIRP Thru-Hull Depth & Temp
Features:
Depth/Temp
Thru-Hull
Hull Deadrise = 0º to 20º
CP450C Plug on Cable
Bronze
Frequency: L=42-65 kHz, M=85-135 kHz
Power: 1kW
Low: 25 to 16 degree beamwidth
Medium: 16 to 11 degree beamwidth
Hull type: fiberglass or wood
|
1971.18 |
|
|
GST™ 43 Thru-Hull Speed/Temperature Transducer w/GST™ 10 Bundle
The GST 43 is a thru-hull transducer that can read water speed and temperature. The transducer can retrofit an existing Nexus 43mm thru-hull transducer (TH43).
Bundled with the GST 10, the GST 43 can connect directly to the NMEA 2000® network, and the information can be displayed on a compatible Garmin chartplotter or instrument display.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
188.99 |
|
|
GST™ 43 Thru-Hull Speed/Temperature Transducer
The GST 43 is a thru-hull transducer that can read water speed and temperature. The transducer can retrofit an existing Nexus 43mm thru-hull transducer (TH43).
Bundled with the GST 10, the GST 43 can connect directly to the NMEA 2000® network, and the information can be displayed on a compatible Garmin chartplotter or instrument display.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
143.99 |
|
|
SVS-760 Dual Frequency Sounder - 600W
The 50/200kHz SVS-760 sounder features powerful 600W output and a vertically oriented, sunlight viewable 7.5" color LCD display that optimizes presentation of bottom composition/contour and fish targets beneath the vessel. With depth ranges down to 4,800 feet, a high-resolution color LCD display, clearly marked controls and large, easy-to-use controls, this sounder is ideal for professional users as well as serious sportfishing duty.
SI-TEX's digital sounding technology eliminates unwanted noise and provides a sharp image of the seabed and fish targets. The unit's high-speed CPU delivers seamless zooming and provides superior readings even at higher boat speeds. This powerful processor also ensures that even the smallest fish targets are presented on the display.
Among the SVS-760's long list of professional sounder features are White Line/Black Line Bottom Discriminator to separate bottom-hugging fish from the sea floor, Auto/Manual Gain and Range Selection, Bottom Lock, Bottom Zoom and A-Scope. Users can select from various fish symbols based on the size and type of targets being marked.
For enhanced operation and awareness, alarms are provided for Depth, Fish School and Water Temperature. The SVS-760 also features an SD card slot, allowing fishermen to back up information and record data on important fishing spots.
Features:
7.5" color LCD display
50/200 kHz
High resolution display
SD card slot
B744V Thru-Hull Triducer 600kW, 50/200kHz
The B744V Triducer Multisensor provides you with depth, speed, and temperature in one thru-hull housing. This unit is ideal for all 600 Watt fishfinders and requires only a single hole in the hull. The B744V's valve assembly prevents water from rushing into the hull when the insert is removed for cleaning or storage. The innovative housing design allows the TRIDUCER Multisensor to be fully recessed into its custom High-Performance Fairing. The end result is a streamlined installation. At speeds above 30 knots (34 MPH), the B744V will produce clear images and solid bottom tracking.
Features:
Thru Hull Bronze Housing
Frequency: 50/200 kHz
Cone: 45°/12°
Depth, speed, and temperature in one housing
Maximum depth range 50 kHz 235m to 353m (800' to 1,200') - 200 kHz 118m to 206m (400' to 700')
Greatly improved high-speed performance at both 50 kHz and 200 kHz when installed with a high-performance fairing
Self-closing sea valve reduces water flow into the hull when paddlewheel insert is removed
Speed Operating Range: 1 knot to 45 knots (1 MPH to 52 MPH)
The extra length of the B744VL allows mounting into thicker and/or high deadrise hulls
Boat Size: 9m (30') and up
Speed insert is easily removed for service or storage
Fins on sides of paddlewheel cavity improve accuracy at low speeds and in cross flow conditions
Valve assembly is replaceable
Airmar's fairings are easy to cut and will not swell or rot
8 pin connector
Shielding eliminates interference between the speed and depth sensors for more accurate instrument readings
Fishing Applications:
Inshore or coastal fishing in shallow to medium depths
Slow trolling, structure fishing and drifting
Deep-water lake fishing
|
1112.16 |
|
|
Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 0° Tilt, 8-Pin - Airmar B175HW
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage.
The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, high, and high wide versions provide maximum flexibility for the choice of frequencies.
An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 600'; an operating frequency of 150-250 kHz; a beamwidth of 25°; and a 0 to 7° deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1196.99 |
|
|
Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 20° Tilt, 8-Pin - Airmar B175HW
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage.
The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, high, and high wide versions provide maximum flexibility for the choice of frequencies.
An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 600'; an operating frequency of 150-250 kHz; a beamwidth of 25°; and a 16 to 24° deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1196.99 |
|
|
Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 12° Tilt, 8-Pin - Airmar B175HW
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage.
The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, high, and high wide versions provide maximum flexibility for the choice of frequencies.
An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 600'; an operating frequency of 150-250 kHz; a beamwidth of 25°; and a 8 to 15° deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1196.99 |
|
|
B117 Bronze Thru-Hull Low-Profile 600 W Blue Connector
Applications
Planing hull powerboats
Sailboats
Features
Industry standard for low-profile transducers
Depth and temperature
Good target detail in shallow-water at 200kHz and good deep-water bottom tracking at 50kHz
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze housing
Boat Size: 8M (25') and up
|
288.35 |
|
|
Airmar P319 200/50kHz Plastic Thru-hull Transducer (8-pin)
010-10194-21
This plastic thru-hull mount transducer performs well at high speeds.
An excellent choice for fiberglass and metal hulls, this 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Do not use on wood hulls.
When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
161.99 |
|
|
R109LH Urethane Chirp Thru-Hull with Temp & High Speed Fairing Block - No Connector
Transducer Features:
Airmar R109 Housing Style Transducer
The Broadband R109 operates at any frequency between 38 kHz to 75kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R109's beamwidth and depth capabilities. For example if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you more of what is around your vessel, including bait which may attract game fish.
Because the R109 has a bandwidth that covers a continuous frequency spectrum, next generation Fish Finders utilizing Furuno Free Synthesizer (FFS) technology can be made “tunable”, so fishermen can “dial-in” the best frequency for the target fish species or conditions.
Standard Features:
Thru-Hull Transducer with High Performance Fairing Block Kit
3kW Low Frequency, 2kW High Frequency
Furuno Free Synthesizer (FFS) compatible - select any two frequencies from 38 kHz to 75kHz and 130 kHz to 210 kHz
Beam angle dependent upon frequency:
Low = 19 degrees to 10 degrees port-starboard (10 degrees to 5 degrees fore-aft)
High = 8 degrees to 4 degrees
No Connector
Designed for 40ft and above boats made of fiberglass, wood or metal
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3324.44 |
|