|
Rope Bag - Medium - 15.75" x 9.875" x 7.875"
Features:
Hook-and-loop fastening using improved 3M self-adhesive
Screw-on option for rope bags (screws not provided)
Mesh panels for drainage & ventilation
Fiberglass entry edge rods for easy
opening (rope bags)
UV fade & mildew resistant
Size: 15.75" x 9.875" x 7.875"
Weight: 22.9 oz.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.99 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and X-Grip® for 7-8" Tablets
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball that accommodates bars 1 1/8" to 1 ½” in diameter with a B-sized standard length arm and the dynamic X-Grip® for 7”-8” tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
Cradle Dimensions
Minimum Width = 2.5" (Minimum Height = 7")
Maximum Width = 5.75" (Minimum Height = 4")
Depth = 0.875"
Features:
1. Spring loaded cradle expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Socket technology allows for multiple adjustment angles and articulation of your tablet
4. Easy access grip knobs, located on the back of the cradle for quick release of your tablet
5. Includes Tether for open cockpit and extreme environments
6. Lifetime warranty
7. Rustproof
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
RAM highly recommends using the provided Tether for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.
Weight:
0.86 lbs.
|
68.89 |
|
|
D-Vec Boat Bag - Medium - 15" x 11" x 10" - Grey/Blue
From top to bottom, Daiwa’s Boat Bag is meticulously designed and constructed of only the best materials. Beginning with the outer material, the Boat Bag features an incredibly durable and waterproof marine-grade vinyl. Not water-resistant, but waterproof. The marine quality, the double-zippered top is further protected by a storm flap, enhancing the Boat Bag’s ability to repel water. Below, you’ll appreciate the non-slip, thick EVA padded bottom. The padding adds cushioning for more delicate items like a camera or smartphone.
Size: 15" x 11" x 10"
|
44.72 |
|
|
RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Medium Arm and X-Grip® for 7-8" Tablets
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8” – 5/8” in diameter with a B-sized standard length arm the dynamic X-Grip® for 7”-8” tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 3/8" to 5/8" in diameter
Cradle Dimensions
Minimum Width = 2.5" (Minimum Height = 7")
Maximum Width = 5.75" (Minimum Height = 4")
Depth = 0.875"
Features:
1. Spring loaded cradle expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Socket technology allows for multiple adjustment angles and articulation of your tablet
4. Easy access grip knobs, located on the back of the cradle for quick release of your tablet
5. Includes Tether for open cockpit and extreme environments
6. Lifetime warranty
7. Rustproof
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
68.15 |
|
|
Torpedo Trap - Black Minnow Trap - 10" x 9.75" x 9"
Features:
Heavy-duty vinyl dipped steel mesh construction construction Black color offers camouflage
2-pc design offers easy baiting and catch removal
Torpedo shape works in current or calm waters
Includes spring clip for closure
|
16.93 |
|
|
Torpedo Trap - Galvanized Minnow Trap - 10" x 9.75" x 9"
These are the number one selling live bait traps for a reason- they work! Not all traps are designed to catch bait. Many of inexpensive traps are designed for price and a quick sale but not for catching bait. Frabill offers the largest selection in both square and torpedo shaped models to fit a variety of bait catching applications. Trap em' and stack em' with Frabill!
Features:
Heavy-duty galvanized metal construction
2-pc design offers easy baiting and catch removal
Torpedo shape works in current or calm waters
Includes spring clip for closure
|
20.50 |
|
|
X2™ Range Bag - Medium
Features:
Includes range bag and two medium-sized removable cases (1712 ammo can and 140300 pistol case)
Large front pocket secures pistol case or holds medium to large-frame pistols
Two magazine pockets, one large side pocket, and one back mesh pocket conveniently store accessories
Interior Dimensions: 15.25" x 9.75" x 9.25"
|
49.49 |
|
|
Halyard Bag - Medium
This handy Blue Performance bag is perfect for storing your halyards at the mast.
Features:
Storage for up to three mast-head halyards
Velcro mast straps
Self-draining
Waterproof, mildew, and UV-resistant Ripstop
Three hanging rope clips inside the bag to separate halyards
Heavy duty zip front with Velcro flap
The open collar at the top for halyard entry
Specifications (L x W):
Medium: (inch) 6.9 x 23.6 x 5.1 / (mm) 175 x 600 x 130
*Sold as an Individual
|
63.73 |
|
|
Sea Rail Bag - Medium
This handy Blue Performance sea rail bag is perfect for letting you store your gear.
Features:
Integrated Raincover
Attach to the wire/rail using a Velcro flap and fix upright with two webbing straps on the lower wire/rail
Inner pocket with closure
Mesh side panels
Waterproof, mildew, and UV-resistant material
Ripstop lining
An integrated pocket in the base contains a waterproof cover manufactured from UV-resistant Ripstop
Specifications (L x W):
Medium: (inch) 13.8 x 9.8 x 2.8 / (mm) 350 x 250 x 70
*Sold as an Individual
|
78.43 |
|
|
Bulkhead Sheet Combination Bag - Medium
This Blue Performance handy storage bag is perfect for letting you store your winch handle, drinks, sun cream, etc.
Features:
Integrated Raincover
Attach and remove using Blue Performance screw-in hooks
Three compartments with mesh bottom
Mesh front pouch
Waterproof, mildew, and UV-resistant material
Ripstop lining
An integrated pocket in the base contains a waterproof cover manufactured from UV-resistant Ripstop
Specifications (L x W):
Medium: (inch) 15.2 x 10.8 x 4.3 / (mm) 385 x 275 x 110
*Sold as an Individual
|
78.43 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and X-Grip® for Larger Phones
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a B-sized standard length arm and the dynamic X-Grip® for larger phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
Cradle Dimensions
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
Weight:
0.78 lbs.
|
58.87 |
|
|
RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Medium Arm and X-Grip® for Phones
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8" - 5/8" in diameter with a B-sized standard length arm and the dynamic X-Grip® for phones. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 3/8" to 5/8" in diameter
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
58.08 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and X-Grip® for Larger Phones
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/4” – 1” in diameter with a B-sized standard length arm the dynamic X-Grip® for larger phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Cradle Dimensions
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
61.73 |
|
|
RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Medium Arm and X-Grip® for Larger Phones
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8" to 5/8” in diameter with a B-sized standard length arm and the dynamic X-Grip® for larger phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 3/8" to 5/8" in diameter
Cradle Dimensions
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
61.19 |
|
|
Bulkhead Sheet Bag - Medium
Store your drinks, sun cream, etc, in this handy storage bag.
Features:
Integrated Raincover
Attach and remove using Blue Performance screw-in hooks
One compartment
Mesh side panels
Waterproof, mildew, and, UV-resistant material
Ripstop lining
An integrated pocket in the base contains a waterproof cover manufactured from UV-resistant Ripstop
Specifications (L x W):
Medium: (inch) 13.8 x 9.8 x 2.8 / (mm) 350 x 250 x 70
*Sold as an Individual
|
58.85 |
|