|
Digital C Cable Adapts Adapts Old SI-TEX Transducers To Newer Models
Adapts older SI-TEX transducers to current ones.
Features:
Digital A Cable
8-pin Fuji (old type metal plug) to 8-pin CONXALL (plastic waterproof plug)
|
41.96 |
|
|
Adapts older SI-TEX transducers to current ones
Digital A Cable
8-pin Fuji (old type metal plug) to 8-pin CONXALL (plastic waterproof plug).
|
42.00 |
|
|
Digital D Cable Adapter
The Digital D Cable converts the CX transducer connector used on the CVS-126 & SVS Sounders to the ES-type connector used on the NavPro Series and the SCS-1000 BB Sounder Module.
|
63.00 |
|
|
SI-TEX 250/50/200ST Transom Mount Transducer
Dual Frequency 50/200 kHz
Max Power: 600W
Beam Angle: 45 deg. @ 50 kHz, 11 deg. @ 200 kHz
Housing: Plastic
Mount: Transom
Plug: 8 pin
Cable: 30'
Temp: Yes
Speed: Yes
For SI-TEX model: CVS106MKIIDF, 106L, 106MKII, 832, 833, Genesis
|
126.00 |
|
|
SI-TEX 492/50/200 In-Hull Transducer f/ES502
Dual Frequency 50/200 kHz
Max Power: 500W
Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz
Housing: Plastic
Mount: In-Hull
Plug: 8 pin
Cable: 30'
Temp: No
Speed: No
For SI-TEX model: ES502
|
113.99 |
|
|
SI-TEX 492/50/200ST Transom Mount Transducer f/ES502
Dual Frequency 50/200 kHz
Max Power: 500W
Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz
Housing: Plastic
Mount: Transom
Plug: 8
Cable: 30'
Temp: Yes
Speed: Yes
For SI-TEX model: ES502
|
252.00 |
|
|
Adapter Cable for MotorGuide Transducer to Element 15-Pin
Raymarine Adapter cable for MotorGuide Transducer to Element HV display.
|
61.36 |
|
|
Adapter Cable, 10-Pin Transducer to 8-Pin Sounder
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
81.82 |
|
|
15' Extension Cable - 8-Pin
SI-TEX Extension Cable
Features:
15'
8-Pin
|
67.20 |
|
|
30' Extension Cable - 8-Pin
SI-TEX Extension Cable
Features:
30'
8-Pin
|
100.80 |
|
|
5M Data Cable
This 6-pin SI-TEX cable is a heading sensor data cable.
Specifications:
Length: 5 meters
|
63.00 |
|
|
Type "T" Mechanical Dashboard Drive w/ Built-in Rudder Feedback
SP-70
Handheld Autopilot System
Low cost autopilot designed for easy installation
The SI-TEX SP-70 Autopilot will add relaxation to your cruising and fishing
activity. Designed for most any boat and easily installed on outboard,
inboard and sterndrive vessels with either hydraulic, or quadrant steering
systems.
Ultra-compact, waterproof Control, Unit has simple keypad operation
and large LCD display of heading course, rudder angle, operating mode and
error messages.
Control Unit can be used as dash-mounted keypad or quickly and easily
removed from mounting bracket for use as a handheld portable.
Additional steering stations can be easily added with optional plug-in
connectors.
Exceptionally easy to use. Just steer to desired course, press the PILOT
key and the system takes over to steer you on your way. Automatically.
Built-in NMEA-0183 Loran/GPS interface for precise course-line
navigation along routes.
Bold, backlit displays with ten levels of brightness for clear reading
in any light.
Digital displays of rudder angle and operation mode in use, constantly
giving you up-to-the-minute operating status.
Automatic Sea State and Trim Controls and ten selectable levels of
rudder sensitivity with high and low speed settings for smooth, precise
steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements
to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostic and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand By
mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of
exact rudder position.
Works with solenoid valves also.
Old Part # SP-70MT
|
3299.70 |
|
|
Type "S" Mechanical Dashboard Drive w/built in rudder feedback
SP-70
Handheld Autopilot System
Low cost autopilot designed for easy installation
The SI-TEX SP-70 Autopilot will add relaxation to your cruising and fishing
activity. Designed for most any boat and easily installed on outboard,
inboard and sterndrive vessels with either hydraulic, or quadrant steering
systems.
Ultra-compact, waterproof Control Unit has simple keypad operation
and large LCD display of heading course, rudder angle, operating mode and
error messages.
Control Unit can be used as dash-mounted keypad or quickly and easily
removed from mounting bracket for use as a handheld portable.
Additional steering stations can be easily added with optional plug-in
connectors.
Exceptionally easy to use. Just steer to desired course, press the PILOT key and the system takes over to steer you on your way. Automatically.
Built-in NMEA-0183 Loran/GPS interface for precise course-line
navigation along routes.
Bold, backlit displays with ten levels of brightness for clear reading
in any light.
Digital displays of rudder angle and operation mode in use, constantly
giving you up-to-the-minute operating status.
Automatic Sea State and Trim Controls and ten selectable levels of
rudder sensitivity with high and low speed settings for smooth, precise
steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements
to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostic and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand By
mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
Works with solenoid valves also.
Old Part # SP-70MS
|
3138.70 |
|
|
TRAWLPLOT 12
12.1" Color LCD GPS/WAAS Charting System
Advanced C-MAP MAX/NT+ Charting System for the Professional features High-speed Intel Xscale Processor, Easy Operation, Unlimited Storage, GPS WAAS Positioning, Large 12.1" Daylight Viewable Display and expands to an all-in-one GPS Chart/Fishfinder/Radar with optional sensors.
12.1" XVGA Color LCD TFT display with 800 x 600 pixels for high-definition.
GPS WAAS 18-channel receiver will put your boat within 3 meters of your waypoint in most situations.
Newly designed high-speed processor with INTEL XSCALE Architecture gives you instant screen changes. Zoom level changes appear in the blink of an eye, regardless of the amount of screen detail.
Compatible with the new C-MAP MAX charts, technically the most innovative C-MAP charts ever designed.
System operates as a C-MAP MAX based chart plotter with four C-Card slots, or as a track plotter without map display.
Guardian™ Programmable Anti-Grounding feature* lets you know if your current course takes you within preset distance of charted shoals, obstructions or other areas where the water is too shallow for your vessel's draft.ES502 Fishfinder Module and optional 2kW to 4kW MDS Radar Sensors.
Depth Graph feature accepts input from onboard sounder or optional Active Transducer to display graphic presentation of vessel's current depth and recent depth history.
Operates in North-Up or Track-Up modes.
Coordinates displayed in Lat/Lon, Loran TD's, or UTM.
Displays Loran TD's even when position data is supplied in Lat/Lon coordinates.
Alphanumeric designations for easy identification of waypoints and marks.
"One-Touch" event markfor easy storage and retrieval of gear marks.
Unlimited amount of fishing-ground track and route data can be downloaded and stored on standard 3.5" floppy disks. Can read disks from many previous SI-TEX plotters.
Each disk can store up to 80,000 track plots and up to 40,000 user points of track and route data for quick recall and display as desired.
Tide Info feature uses local C-Card information to calculate tide graph for local ports.
Find Function uses local C-Card to locate nearest boatyard, bank, even the closest shower.
Joystick control of on-screen cursor to plot, scroll, pan, zoom and place waypoints, events and marks, and to control on-screen VRM and EBL.
GOTO and MOB functions.
Fourteen selectable languages.
Route Data Page displays waypoint position, distance and bearing between the previous waypoint and the current one, fuel consumption, fuel consumption between the waypoint and the first waypoint of the route, estimated time enroute, and total distance.
Data information window displays digital route navigation data, and a wealth of other information.
Two NMEA-0183 dataports for interfacing data with other on-board electronics.
Zoom into as little as 180' across screen.
Optional ES502 Fishfinder Module adds full-featured fishfinder capabilities.
|
2351.16 |
|
|
SP-70 Autopilot with Pump & Rotary Feedback
The SI-TEX SP-70 Autopilot will add relaxation to your cruising and fishing activity. Designed for most any boat and easily installed on outboard, inboard and sterndrive vessels with either hydraulic, or quadrant steering systems.
Features:
Ultra-compact, waterproof Control Unit has simple keypad operation and large LCD display of heading course, rudder angle, operating mode and error messages.
Control Unit can be used as dash-mounted keypad or quickly and easily removed from mounting bracket for use as a handheld portable.
Additional steering stations can be easily added with optional plug-in connectors.
Exceptionally easy to use. Just steer to desired course, press the PILOT key and the system takes over to steer you on your way. Automatically.
Built-in NMEA0183 Loran/GPS interface for precise course-line navigation along routes.
Bold, backlit displays with ten levels of brightness for clear reading in any light.
Digital displays of rudder angle and operation mode in use, constantly giving you up-to-the-minute operating status.
Automatic Sea State and Trim Controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostic and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand By mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
Works with solenoid valves also
|
2856.95 |
|