NMEA 2000 Liquid Level Sensor - 1200 to 1500mm
The NMEA 2000® Liquid Level Sensor overcomes a laundry list of issues that plague traditional fluid level monitoring solutions, including being certified for drinking water—an industry first.
Powered by an NMEA 2000 network, three models are available to accommodate a wide range of tank depths from 200 mm to 1500 mm.
The capacitive sensor is easily selectable between fresh and waste water, and is micro-adjustable for tank size. Unlike reed technology that only reports tank level in graduated steps, the Veratron NMEA 2000 Liquid Level Sensor, thanks to capacity measuring technology, offers level linearity on the full range. This provides precise data to make informed decisions on refilling and pumping out or discharging, for up to 4 tanks.
Completely plug-and-play, the Veratron sensor simply connects directly into the backbone with its integrated Micro-C M12 5-pin NMEA 2000 connector. This provides the nominal 12V power and the ability to view tank level from any networked display.
UL94, CE, REACH and RoHS compliant, the NMEA 2000 Liquid Level Sensor is IPX9K rated as an exposed device.
Features:
Includes Flange Installation Kit
300mm NMEA Pigtail Connection
Technical Specifications:
Connector - NMEA 2000 Micro-C 5 pin M12 Male
IP Protection Class - IPX9K
In the Box:
Sensor
Sealing Kit
Rubber Gasket
Mounting Bracket
Mounting Screws and Allen Wrench
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
359.99 | |
NMEA 2000 Liquid Level Sensor - 200 to 600mm
The NMEA 2000® Liquid Level Sensor overcomes a laundry list of issues that plague traditional fluid level monitoring solutions, including being certified for drinking water—an industry first.
Powered by an NMEA 2000 network, three models are available to accommodate a wide range of tank depths from 200 mm to 1500 mm.
The capacitive sensor is easily selectable between fresh and waste water, and is micro-adjustable for tank size. Unlike reed technology that only reports tank level in graduated steps, the Veratron NMEA 2000 Liquid Level Sensor, thanks to capacity measuring technology, offers level linearity on the full range. This provides precise data to make informed decisions on refilling and pumping out or discharging, for up to 4 tanks.
Completely plug-and-play, the Veratron sensor simply connects directly into the NMEA backbone with its integrated Micro-C M12 5-pin NMEA 2000 connector. This provides the nominal 12V power and the ability to view tank level from any networked display.
UL94, CE, REACH and RoHS compliant, the NMEA 2000 Liquid Level Sensor is IPX9K rated as an exposed device.
Features:
Includes Flange Installation Kit
300mm NMEA Pigtail Connection
Technical Specifications:
Connector - NMEA 2000 Micro-C 5 pin M12 Male
IP Protection Class - IPX9K
In the Box:
Sensor
Sealing Kit
Rubber Gasket
Mounting Bracket
Mounting Screws and Allen Wrench
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
254.18 | |
NMEA 2000 Liquid Level Sensor - 600 to 1200mm
The NMEA 2000® Liquid Level Sensor overcomes a laundry list of issues that plague traditional fluid level monitoring solutions, including being certified for drinking water—an industry first.
Powered by an NMEA 2000 network, three models are available to accommodate a wide range of tank depths from 200 mm to 1500 mm.
The capacitive sensor is easily selectable between fresh and waste water, and is micro-adjustable for tank size. Unlike reed technology that only reports tank level in graduated steps, the Veratron NMEA 2000 Liquid Level Sensor, thanks to capacity measuring technology, offers level linearity on the full range. This provides precise data to make informed decisions on refilling and pumping out or discharging, for up to 4 tanks.
Completely plug-and-play, the Veratron sensor simply connects directly into the backbone with its integrated Micro-C M12 5-pin NMEA 2000 connector. This provides the nominal 12V power and the ability to view tank level from any networked display.
UL94, CE, REACH and RoHS compliant, the NMEA 2000 Liquid Level Sensor is IPX9K rated as an exposed device.
Features:
Includes Flange Installation Kit
300mm NMEA Pigtail Connection
Technical Specifications:
Connector - NMEA 2000 Micro-C 5 pin M12 Male
IP Protection Class - IPX9K
In the Box:
Sensor
Sealing Kit
Rubber Gasket
Mounting Bracket
Mounting Screws and Allen Wrench
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
281.99 | |
NMEA 2000 Transducer Smart Sensor DTS810
This combination transducer gives you accurate information about depth, speed and water temperature. The transducer is supplied with a thru-hull / ground sleeve for installation in the bottom of the vessel. The transducer can be easily pulled out for cleaning and maintenance. The data from the Triducer can be displayed on any radar, chart plotter, or device that accepts NMEA 0183 or NMEA 2000® data. The Airmar type DST810 breakthrough sensor fits into the Airmar type P617V breakthrough sleeve (included with the DST810). Because the widely used airmar thru-hull transducer type DST800 is also supplied with the thru-hull type P617V, an exchange / upgrade of existing transducers of the type DST800 with the type DST810 is possible without much effort. Popular depth sensor for shallow water performance.
|
419.95 | |
TLA100 NMEA 2000®Tank Level Adapter
The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200.
The TLA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the TLA100 can be calibrated for any resistance between 0 and 300 ohms.
Unlike most tank senders that only work with rectangular tanks, the TLA100 can be calibrated for irregular tank shapes so you know the true level of the tanks. You can also use the TLA100 with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information.
Features:
Tank Level
Tank Capacity
FLuid Type
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
252.48 | |
Navigation Kit for Sail, Wind Sensor, Transducer, Display & Cables
Complex boats need a smart solution. And we have it. VDO Marine OceanLink® display is the only product on the market able to interpret CAN, NMEA 2000® and analog signals without any additional external device.
Safety, performance, entertainment. VDO Marine Navigation Kit and Navigation Kit Plus is the solution! Our Navigation Kits will become essential crew members which ensure you top performance in the open sea, even in the most extreme situations.
All in one box All you need is in one box including wiring harness and terminators. All products are REACH and RoHS compliant and NMEA 2000® certified.
Navigation Kit Plus includes:
1x OceanLink 4.3 TFT Display/Gateway - Black
1x NMEA 2000 Wind Sensor
1x NMEA 2000 Triducer Airmar Sensor (Speed/Depth/Water Temp)
1x 30m NMEA 2000 backbone (mast) cable
1x 6m NMEA 2000 drop cable
1x NMEA 2000 terminator (female)
1x NMEA 2000 terminator (inline)
2x NMEA 2000 T-splitter
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1555.94 | |
Sealing Kit for Water Level Sensors
Replacement kit for water sensors.
In the Box:
Gaskets x 2
Allen bolts
Allen key
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
52.99 | |
NMEA 2000 Terminator - Female
This NMEA 2000 terminator allows for proper termination of an NMEA 2000 network. The couplers connect to the corresponding T-connectors for a simple installation.
Features:
Includes (1) female NMEA 2000 terminator
Please note that installation of a NMEA 2000 network requires (1) male and (1) female terminator.
1-Year Limited Warranty
|
19.99 | |
NMEA 2000 Terminator - Male
This NMEA 2000 terminator allows for proper termination of an NMEA 2000 network. The couplers connect to the corresponding T-connectors for a simple installation.
Features:
Includes (1) male NMEA 2000 terminator
Please note that installation of a NMEA 2000 network requires (1) male and (1) female terminator
1-Year Limited Warranty
|
19.99 | |
25W Commercial Grade Fixed Mount VHF with NMEA 2000 & Integrated AIS Receiver
NMEA 2000
Plug and play NMEA 2000 interface. The integrated NMEA 2000 supports all PGN's for Navigation, GPS, AIS and DSC function. Simply plug the NMEA 2000 into your existing network to complement your system with full VHF and DSC features.
Wireless Second Station RAM4W capability
Wirelessly control all radio functions of the GX6000 with the interface of the RAM4W wireless Remote Access Microphone. Using the SCU-30 Wireless Access Point plugged into the back of the radio, you have the capability of syncing up to 4 RAM4W units. With an operating range of up to 65 feet, the RAM4W allows you to control all Radio functions including DSC Calling, Position Polling, Group Calling and more, or use the RAM4W to intercom between the main station or between other wireless RAM4W units.
Built In AIS Receiver
The Quantum GX6000 displays AIS target information (MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG) on the large front panel display. Having this information allows you to contact an AIS Ship directly using DSC, shows your vessels position in relation to AIS targets and alerts you when an AIS ship may be approaching too close to your location via the Closest Point of Approach (CPA) Alarm.
Integrated 25W PA/Loud Hailer
The Quantum GX6000 includes a 25W Loud Hailer with Fog signals; Bells and Whistles with listen back. For added benefit, the last selected VHF channel can be heard when in the PA or Fog modes and the AIS Display may be accessed and used.
In addition, the Quantum GX6000 allows you to start a fog horn and then view the AIS page simultaneously.
Integrated Voice Scrambler
Loaded with an internal 32 code voice scrambler for private communications. the 32 code scrambler is compatible with all Standard Horizon 4 code scramblers already in use. Simply select a channel to be scrambled then select a common code between the transmitting and receiving radios and your communications are secure.
Features:
Integrated AIS Receiver**
Built-in Speaker in microphone handset
AIS / AIS SART target display: MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG
NMEA2000 and NMEA0183 compatible
Programmable CPA and TCPA collision avoidance alarms
Dual Zone 25W PA / Loud Hailer with preprogrammed fog signals and listen back
GPS Compass, Waypoint and GPS status pages
E2O Easy to Operate menu system
Oversized rotary channel knob with push to enter
Front panel microphone can be connected to rear panel and extended 20 feet using MEK-4 mic extension kit
Capable of connecting two optional RAM4 or four Wireless RAM4W
Integrated Voice Recorder to play back up to two minutes of RX receive audio
Advanced 80dB Commercial Grade receiver with Local / Distance Attenuator
Integrated 32 Code (FVP-42) and 4 Code (CVS2500A) Voice Scramblers
Overall Dimensions 6.9"W x 4.3"H
Flush-Mount Dimensions 6.2"W × 3.7"H × 6.2"D
3 Year Waterproof Warranty
**Requires a separate dedicated AIS antenna
|
480.67 | |
Standard Horizon GX2400B Matrix Black VHF w/AIS, Integrated GPS, NMEA 2000 30W Hailer, & Speaker Mic GX2400B Black VHF/AIS Integrated GPS/AIS/NMEA 2000 with 30W Hailer
Power, Performance, Reliability! Featuring the GX2400 Matrix AIS/GPS/NMEA2000.
NMEA2000
Plug and play NMEA 2000 interface. The integrated NMEA 2000 supports all PGN's for Navigation, GPS, AIS and DSC function. Simply plug the NMEA 2000 into your existing network to complement your system with full VHF and DSC features.
Wireless Second Station RAM4W capability
Wirelessly control all radio functions of the GX2400 with the interface of the RAM4W wireless Remote Access Microphone. Using the SCU-30 Wireless Access Point plugged into the back of the radio, you have the capability of syncing up to 4 RAM4W units. With an operating range of up to 65 feet, the RAM4W allows you to control all Radio functions including DSC Calling, Position Polling, Group Calling and more, or use the RAM4W to intercom between the main station or between other wireless RAM4W units.
Built In AIS Receiver
The GX2400 Matrix AIS/GPS/NMEA2000 displays AIS target information (MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG) on the large front panel display. Having this information allows you to contact an AIS Ship directly using DSC, shows your vessels position in relation to AIS targets and alerts you when an AIS ship may be approaching too close to your location via the Closest Point of Approach (CPA) Alarm.
Integrated 30 Watt PA / Loudhailer
Powerful 30 Watt integrated PA system with Loudhailer and listen back capabilities. Switch to fog horn mode to select any of the preprogrammed fog signals, with siren and horn features. For added benefit, the last selected VHF channel can still be monitored when in the PA or Fog modes.
Integrated Voice Scrambler
Loaded with an internal 32 code voice scrambler for private communications. the 32 code scrambler is compatible with all Standard Horizon 4 code scramblers already in use. Simply select a channel to be scrambled then select a common code between the transmitting and receiving radios and your communications are secure.
Features:
NMEA2000 and NMEA0183 Compatible
Built-in Speaker in Microphone Handset
Second station capability with wired RAM4 or wireless RAM4W (when used with the optional SCU-30 WiFi Module)
Built-in integrated 66 channel GPS receiver
Integrated 32 Code Voice Scrambler and 4 Code Voice Scrambler
Noise canceling function for both receive and transmit audio
Meets ITU-R M.493-15 Class D (Digital Selective Calling)
Separate Receiver for CH70 (Receiving DSC Calls)
AIS/AIS SART target display: MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG
E2O (Easy to Operate) Icon & Menu System
Preset key stores up to 10 favorite channels
Intercom Feature between the Radio and an Optional Second Station
Programmable Scan, Priority Scan, and Multi Watch
DSC position request and report functions
GPS Compass, Waypoint and GPS status pages
Enter, Save, and Navigate to a waypoint using the Compass page
Navigation (LAT/LON, Time, SOG and COG) information is shown on display
Programmable CPA (Closest Point of Approach) or TCPA (Time to Closest Point of Approach) alarms
Commercial grade receiver (Spurious & Image rejection better than –80dB)
30 Watt PA/Loud Hailer with programmed fog signals and listen back
GM (Group Monitor) Using DSC Group position Calling
MOB (Man over Board) Operation
Excellent Visibility with Busy LED Indicator
Selectable Night Mode Display
NOAA Weather Channels with Weather Alert
|
432.60 | |
NMEA 2000 Cable & T Connector Connection Kit for Siren 3 Pro
Optimize the connectivity of your Connected Boat® system, allowing you to monitor engine data, water, fuel and waste tanks, and more! The NMEA 2000 Connection Kit includes a 2-meter connection cable and a 3-Way Connection "T" – everything you'll need to hook up to the NMEA 2000 data system 'backbone'.
*Compatible with the Siren 3 Pro Only
|
46.16 | |
MS-NRX300 Remote Control - Wired NMEA 2000
Features:
Multi-Zone Technology
Install the MS-NRX300 wired remote anywhere onboard the vessel, in the flybridge, cockpit, saloon or cabin for example and gain full localized control of one or up to four individual audio zones.
NMEA 2000 Certified Certified for connection to any NMEA 2000 network making installation straight forward, saving time and money. Once connected, the wired remote will double as a NMEA 2000 repeater displaying supported NMEA data on screen.
Complies With IPx7 Waterproof Standards.
Perfect for installation on a swim platform or deck, the MS-NRX300 wired remote control is designed for the marine environment.
Designed specifically for the marine environment, featuring a 3 year warranty.
Flush & Dash Moutning Options. Innovative design allows an installer the option of either mounting the wired remote with a conventional dash finish or an option to integrate into a glass helm with a flush surface mount.
Superior Optically Bonded LCD Display Large high contrast daylight viewable 2.6" optically bonded LCD will display crystal clear data/track information and prevent moisture build up or fogging.
Specifications:
NMEA 2000 Certified LEN: 3
Large 2.6" Monochrome optically bonded LCDgh contrast daylight viewable in direct sunlight
Adjustable backlit LCD
Dash or Flush mount installation options
Local zone control or all zone control (up to 4 zones)
Complies with IPx7 waterproof standards
STM32 Micro Processor
Rotary encoder
Advanced user interface
'Positive feel' rubber keypad
In the Box:
MS-NRX300 Remote w/attached 1 M Drop Cable
Dust Cover
6 M NMEA 20000 Backbone Cable
NMEA 2000 T-Connector
NMEA 2000 Female Terminator
NMEA 2000 In-line Terminator
Hardware mounting kit
Mounting template
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
193.27 | |
NMEA 2000 Remote Button
This simple-to-install remote button allows for convenient placement for an emergency ManOverboard (MOB) button, which can trigger alerts across an NMEA 2000® system and devices. Pressing the button will automatically create a MOB waypoint and provide navigation data to reach the MOB position on compatible products.
The button is compatible with Lowrance® HDS® LIVE, Elite FS®, and HDS Carbon displays; Simrad® NSO™, NSSevo3™, and NSSevo3S™ and GO™ Multifunction Displays; B & G® Zeus® 3, Zeus® 3S and Vulcan™ R chartplotters, along with Triton™ 2, H5000 and Nemesis® instrument displays, which also feature a dedicated graphical MOB page. When combined with a B & G H5000 Sailing Processor, the Processor will calculate a dead reckoned position of the MOB position. This safety accessory also aids adherence with World Sailing’s Offshore Special Regulations safety requirements for crew overboard.
Features
Easy to install with plug ‘n play installation
Compatible with NMEA 2000 (MOB) Notification standard - PGN 127233
Compatible with Lowrance, Simrad, and B & G MFDs & instrument displays
Automatically creates a MOB waypoint and provides navigation data to the MOB position
Dedicated graphical MOB pages on Triton 2, H5000 Graphic & Nemesis instrument displays
When combined with an H5000 CPU, the CPU will calculate a dead reckoned position of the MOB
Aids adherence to World Sailing’s Offshore Special Regulations [4.22.2]
|
158.24 | |
IS42J Instrument Links J1939 Diesel Engines to NMEA 2000® Network
More than a standalone gauge, the IS42J links J1939 diesel engines to the boater’s NMEA 2000® network. This allows boaters to view engine data on a wide range of other Simrad gauges and multifunction displays, vessel-wide, without the need for a separate J1939 gateway or converter.
The IS42J is simple to install, with only one cable required for each J1939 engine and a single connection to the boat’s DC power supply. With a dual-engine J1939 gateway built in, there are no separate black-box components to install, and plug-and-play adapter cables are available to suit a wide range of J1939 diesel engines. Sharing engine data with other Simrad gauges or displays is also simple via NMEA 2000® connectivity.
Key Features:
Bright, optically bonded 4.1-inch color display
Monitor up to two J1939 connected engines
Built-in J1939-to-NMEA 2000® gateway
Intuitive operation with waterproof silicon keys
Easy to install and configure
Low-profile glass helm design
Displays and converts many J1939 SPN’s
Configurable data types for digital values and sidebars
Fuel usage and fuel economy monitoring
|
1054.80 | |