Mercury/Mercruiser Aluminum Flat Trim Tab Anode - No Threads Engine plate for Mercury/Mercruiser

Mercury/Mercruiser Zinc Flat Trim Tab Anode - No Threads Engine plate for Mercury/Mercruiser

Standard Aluminum Trim Tab Anode for 25-50 HP Mercury Engines Tecnoseal Aluminum Anode for Mercury Outboard & Mercruiser Sterndrive and engines. For Trim Tab. Fits Mercury 25-50 Hp F25, F30, F40 and F50 outboards (1998 and later). Mercury Part: 822157-C2. For use in Salt water.

Standard Zinc Trim Tab Anode for 25-50 HP Mercury Engines Tecnoseal Zinc Anode for Mercury Outboard & Mercruiser Sterndrive and engines. For Trim Tab. Fits Mercury 25-50 Hp F25, F30, F40 and F50 outboards (1998 and later). Mercury Part: 822157-C2. For use in Salt water.

Aluminum Mercury Zeus Pod Trim Tab Anode Kit with Hardware Features: Material: Aluminum Hardware included

Trim Tab Anode Material: Aluminum Outer Diameter: 3.54" Length:4.13" Weight: 0.42lbs

TEC-BNT Bennett Trim Tab Anode - Zinc - Pair Bennett Trim Tab Anode Features & Specifications: Material: Zinc Length: 3.76" Width: 1.12" Height: 0.55" Weight: 0.47lbs

Trim Tab Anode Material: Zinc Outer Diameter: 3.54" Weight: 1.32lbs

XKA Aluminum Alloy Trim Tab Kit with Rocker Switch - 9 x 9  The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating.  Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket.  Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking.  Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run.  Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 9" (23 x 23 cm) Boat Length - 14' to 19' (4 to 6 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm) Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm) Rocker Switch Operating Voltage - 12 or 24 V In the Box: One (1) Flat Rocker Switch Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit

Zinc Yamaha Trim Tab Anode for 150 - 225 HP Motors A trim tab anode helps counteract the torque that a propeller creates, and levels out "prop-walk," which is a propeller's tendency to rotate concerning a vertical axis. Also, trim tab anodes can absorb various types of corrosion, helping alleviate corrosion to other parts of the boat. Features:  Designed for 150-225 HP Yamaha motors Meant for saltwater boat use Boat type: Motorboat with outboard Specific: Outboard Specifications: Material: Zinc Weight: (lbs) 1.15 / (kg) 0.52 Dimensions: h: (inch) 3.43" / (mm) 87 Ø: (inch) 3.94" / (mm) 100 m: (mm) 10 x 1.25 *Sold as an Individual

Zinc Yamaha Trim Tab Anode for 200 - 300 HP Motors A trim tab anode helps counteract the torque that a propeller creates, and levels out "prop-walk," which is a propeller's tendency to rotate concerning a vertical axis. Also, trim tab anodes can absorb various types of corrosion, helping alleviate corrosion to other parts of the boat. Features:  Designed for 200-300 HP Yamaha motors Meant for saltwater boat use Boat type: Motorboat with outboard Specific: Outboard Specifications: Material: Zinc Weight: (lbs) 1.40 / (kg) 0.64 Dimensions: h: (inch) 1.18" / (mm) 30 h1: (inch) 2.36" / (mm) 60 Ø: (inch) 3.94" / (mm) 100 m: (mm) 10 x 1.25 *Sold as an Individual

Trim Tab Anode Material: Zinc Outer Diameter: 3.54" Length:4.13" Weight: 1.06lbs

Trim Tab Anode Material: Magnesium Outer Diameter: 3.54" Length:4.13" Weight: 0.27lbs

Trim Tab Anode Material: Zinc Outer Diameter: 3.58" Length: 3.94" Weight: 0.87lbs

XKA Aluminum Alloy Trim Tab Kit with Rocker Switch - 9 x 12 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating.  Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket.  Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking.  Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run.  Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm) Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm) Rocker Switch Operating Voltage - 12 or 24 V In the Box: One (1) Flat Rocker Switch Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit