MKR-MI-1 Adapter Cable for Helix 8,9,10 & 12 MSI Units  MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 8, 9, 10 or 12 fish finder with a built-in MEGA Side or Down Imaging transducer on your trolling motor.  Features: Shielded cable for crystal-clear MEGA Down Imaging sonar performance Compatible with HELIX Adapter not required for SOLIX models

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Used in applications where the a plastic thru the hull transducer is required on a boat with a deep V hull or the motor or other items on the transom of the boat may block one side of the transducer and distort readings.    30" length. Supports MEGA Side Imaging. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKR-MDI-2 Humminbird HELIX MDI Sonar Adapter Cable for HELIX 7 MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 7 G3/G4 fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.  Connects your Humminbird HELIX fish finder to a Minn Kota motor equipped with Built-In MEGA Down Imaging Shielded cable for crystal-clear MEGA Down Imaging sonar performance Compatible with HELIX 7 models Adapter not required for SOLIX models Cable length: 30 inches Compatible Units: HELIX 7 CHIRP GPS G2N*/G3N The built-in transducer cannot supply MEGA Down Imaging to Humminbird models that do not already have the capability. If you have a G2/G2N or a G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you will still get 2D CHIRP Digital Sonar from the transducer. *HELIX G2 and G2N units need to be running the latest software update to view sonar from Built-In MEGA Down Imaging motors.

IDMK-H89R Reinforced In-Dash Mounting Kit for HELIX® 8/9 G3N/G4N  In-Dash Mounting Kit allows quick and easy, in-dash installation, with all necessary mounting hardware.  Features: Compatible with: HELIX 9 MSI GPS G4N, HELIX 9 MSI GPS G3N, HELIX 9 MDI GPS G4N, HELIX 9 MDI GPS G3N, HELIX 9 CHIRP GPS G4N, HELIX 9 CHIRP GPS G3N, HELIX 8 MSI GPS G4N, HELIX 8 MSI GPS G3N, HELIX 8 MDI GPS G4N, HELIX 8 MDI GPS G3N, HELIX 8 CHIRP GPS G4N, HELIX 8 CHIRP GPS G3N

UC-H89 Display Cover for HELIX® 8/9 G3  This black silicone unit cover for HELIX 8 G3N and HELIX 9 G3N Series units will help keep your screen clear of debris and help prevent accidental damage to your HELIX unit.  Features: Compatible Fish Finders: HELIX 8 G3N Series – All models, HELIX 9 G3N Series – All models Not for use while trailering your boat

Adapter Cable for CPTS/DVS 9-Pin Transducer to Element 15-Pin Unit Raymarine Adapter Cable used to connect a CPT-S or 9-pin DownVision transducers to Element HV display.

Rubber Gasket Kit for Size 8, 9, & 10 Strainers This gasket kit is for use on Perko intake water strainers. More specifically, this gasket kit fits Perko strainers that are sizes 8, 9, and 10. Kit Includes: Cover gasket  Rubber cylinder gaskets *Note that older model strainers utilizing cork cylinder gaskets must order the 99M Cork Gasket Kit, and newer model strainers must order the 99R Rubber Gasket Kit

Dual HELIX® Starter Kit HWFG - In Hull This kit provides brings it all together- quick and easy. Everything you need to network two Ethernet-equipped HELIX models on a fiberglass boat is included. Additionally, this kit connects the included in hull Dual Spectrum CHIRP transducer with an existing Side/Down Imaging® transducer via the enclosed splitter cable, and includes an adapter cable to connect compatible HELIX 8, 9, 10, 12, 15 MEGA Imaging® units to select Minn Kota® motors with Built-In MEGA Imaging®.  Features: Kit Includes: (1) XP 9 HW T in-hull mount Dual Spectrum CHIRP Transducer and epoxy, (1) AS EC 20E 20' Ethernet Cable, (2) AS EC QDE Ethernet Adapters, (1) MKR-MI-1 Built-In MEGA Imaging HELIX Adapter, (1) 9 M SIDB Y Transducer Splitter Cable Compatible with: HELIX 8 G3N/G4N Series, HELIX 9 G2N/G3N/G4N Series, HELIX 10 G2N/G3N/G4N Series, HELIX 12 G2N/G3N/G4N, HELIX 15 G4N Series 1-Year Limited Warranty

Dual HELIX® Starter Kit HWAL - Transom This kit provides brings it all together- quick and easy. Everything you need to network two Ethernet-equipped HELIX models on an aluminum boat is included. Additionally, this kit connects the included transom mount Dual Spectrum CHIRP transducer with an existing Side/Down Imaging® transducer via the enclosed splitter cable, and includes an adapter cable to connect compatible HELIX 8, 9, 10, 12, 15 MEGA Imaging® units to select Minn Kota® motors with Built-In MEGA Imaging®.  Features: Kit Includes: (1) XNT 9 HW T transom mount Dual Spectrum CHIRP Transducer and epoxy, (1) AS EC 20E 20' Ethernet Cable, (2) AS EC QDE Ethernet Adapters, (1) MKR-MI-1 Built-In MEGA Imaging HELIX Adapter, (1) 9 M SIDB Y Transducer Splitter Cable Compatible with: HELIX 8 G3N/G4N Series, HELIX 9 G2N/G3N/G4N Series, HELIX 10 G2N/G3N/G4N Series, HELIX 12 G2N/G3N/G4N, HELIX 15 G4N Series 1-Year Limited Warranty

MotorGuide Adapter Cables - 4-Pin Trolling Motor Transducer to 4-Pin Fishfinder Adapter Cable These adapter cables allow you to connect a compatible Garmin unit to a MotorGuide trolling motor transducer. Compatible Garmin units w/8-pin connector: echo&#8482 series, echo dv series Compatible MotorGuide trolling motors: Tour - Sonar: TR75L FBD 45" 24V 20.8MT- Part # 930010450 TR82L FBD 45" 24V 21MT - Part # 930011020 TR82L FBD 50" 24V 21MT - Part # 930011030 TR82L FBD 60" 24V 24MT - Part # 930011040 TR109L FBD 45" 36V 21MT - Part # 930011050 TR109L FBD 50" 36V 21MT - Part # 930011060 TR109L FBD 60" 36V 24MT - Part # 930011070 Wireless Sonar: W55L 54" 12V w/ Foot Pedal - Part # 970100100 W75L 48" 24V w/ Foot Pedal - Part # 970100110 W75L 60" 24V w/ Foot Pedal - Part # 970100120 Xi5: Xi5-55FW 48" 12V FP SNR - Part # 940800190 Xi5-55FW 54" 12V FP SNR - Part # 940800200 Xi5-80FW 54" 24V FP SNR - Part # 940800110 Xi5-80FW 60" 24V FP SNR - Part # 940800120 Xi5-105FW 54" 36V FP SNR - Part # 940800150 Xi5-105FW 60" 36V FP SNR - Part # 940800160 Xi5-55FW 45" 12V FP SNR GPS - Part # 940800210 Xi5-55FW 54" 12V FP SNR GPS - Part # 940800220 Xi5-80FW 45" 24V FP SNR GPS - Part # 940800270 Xi5-80FW 54" 24V FP SNR GPS - Part # 940800230 Xi5-80FW 60" 24V FP SNR GPS - Part # 940800240 Xi5-105FW 54" 36V FP SNR GPS - Part # 940800250 Xi5-105FW 60" 36V FP SNR GPS - Part # 940800260 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adapter Cable for CPT-S Transducers To Axiom Pro S Series Units Adapter Cable (25 pin to 9 pin) attach DownVision (CPT-1xx) transducer to Axiom RV. Features: Type: 25 pin to 9 pin Applications: DownVision (DV) and RealVision (RV) Transducers Function: Connect DownVision or CHIRP Transducer to an Axiom RealVision Display Length: 0.3 meters

Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

MKR-US2-1 Garmin Adapter Cable Model:#1852061 Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. These adapters connect your trolling motor to your favorite brand of sonar or fishfinder (200 kHz and 200/83 kHz DualBeam PLUS™ compatible). Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference. Compatible Models MKR-US2-1 Garmin Fishfinder 90, Fishfinder 100, Fishfinder 140, Fishfinder 160, Fishfinder 160C, Fishfinder 250,Fishfinder 250C, Fishfinder 300C, Fishfinder 320C, Fishfinder 340C, Fishfinder 400C, GPSMAP 168,GPSMAP 178C, GPSMAP 198C, GPSMAP 430s, GPSMAP 431s, GPSMAP 530s, GPSMAP 531s,GPSMAP 535s, GPSMAP 536s, Fishfinder 80*, Fishfinder 120**with optional Garmin part number 010-10145-00, sold separately

9-Pin Black to 7-Pin Blue Adapter Cable f/XID Transducers Connects XSONIC Transducers to 7-Pin Blue Units Use with Airmar Chirp transducers