Scanpod Helm Pod Uncut for 9" Displays With great design features, the Scanstrut Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the choice is yours! For Displays & Standard Instruments: Fits up to 9" displays Can accommodate 3 or 4 standard instruments (e.g. ST60) Usable face 13.2H x 8.14W Features: UNIVERSAL HELM FIXING Fits pedestal rails from 25mm to 33.7mm (0.98″ – 1.33″) diameter. Using a unique clamping system, the Deep Pod's can fit rail widths from 178mm (7”) upwards.* SECURE & WATERTIGHT INSTALL Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry. NO DRILL FIXING KIT Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.

Scanpod Deck Pod Uncut for 9" Displays Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. For Displays and Standard Instruments: Fits displays up to 9” Usable face 13.2H x 8.14W Accomodates 3/4 Standard instruments (e.g. ST60) Features: SWIVEL & TILT BASE One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position. BEST VIEWING ANGLE An adjustable ball joint allows range of movement and multiple mounting angles. ADDED STRENGTH Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration. OVERHEAD MOUNTING Deck Pod models can be overhead mounted. Refer to part number guide for compatibility. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.

Scanpod Helm Pod Uncut for 10" to 12" Displays With great design features, the Scanstrut Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the choice is yours! For Displays & Standard Instruments: Fits 10" to 12" displays Can accommodate 3 or 4 standard instruments (e.g. ST60) Usable face 14.7H x 9.7W   Features: UNIVERSAL HELM FIXING Fits pedestal rails from 25mm to 33.7mm (0.98″ – 1.33″) diameter. Using a unique clamping system, the Deep Pod's can fit rail widths from 178mm (7”) upwards.* SECURE & WATERTIGHT INSTALL Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry. NO DRILL FIXING KIT Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.

GP1800 SailPod Uncut f/9.5" Wide Guard GP1800 Series for 9.5" Guard, SailPods are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. Features: Hi-Gloss material Waterproof seal Commitment to quality

Scanpod Deck Pod Uncut for 10" to 12" Displays Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. For Displays and Standard Instruments: Fits 10" to 12" Displays Usable face 14.7H x 9.7W Accomodates 3/4 Standard instruments (e.g. ST60) Features: SWIVEL & TILT BASE One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position. BEST VIEWING ANGLE An adjustable ball joint allows range of movement and multiple mounting angles. ADDED STRENGTH Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration. OVERHEAD MOUNTING Deck Pod models can be overhead mounted. Refer to part number guide for compatibility. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.

Scanpod Deck Pod Uncut for 7" or 8" Display & 2 or 4 Instruments Scanstrut's SPD-4XI-W Deck Pod will fit a 7" or 8" screen plus 2 standard instruments or 4 standard instruments. Can invert the mount above the helm under a T-top or on a fly bridge.

GP1500 SystemPod Uncut for 9.5" Wide Guard GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Usable Face for Uncut 15"W x 6"H *See Literature tab for an image with dimensions

GP1200 SailPod Uncut for 9.5" Wide Guard GP1200 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. Sizing: Overall Size: 11.3"H x 16.5"W x 5.55"D Usable Face: 9.85"H x 15.18"W x 4.25"D Max Cutout:9"H x 14.25"W All SailPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets

GP140 InstrumentPod Uncut for 9.5" Wide Guard NavPod InstrumentPod GP2400 Series for 12" Guard are used for mounting two - four in a single NavPod at the helm or companionway. An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway. All InstrumentPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets

GP1600 SystemPod Uncut for 9.5" Wide Guard GP1600 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Usable Face: 19.75"W x 6"H All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

Scanpod Helm Pod System - White With great new design features, the Scanstrut Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments. Usable face : 21w x 11h  Range of Models Helm Pod – System Pod for 8" screen + 4 standard nav instruments; or 12" screen + 2 standard nav instruments Universal Helm Fixing Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards. Secure & Watertight Install Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry No Drill Fixing Kit Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.

Scanpod Helm Pod 3 Instrument Uncut - White With great features, the Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the Helm Pod is the right choice for you. For Displays & Standard Instruments: 3 x standard navigation instruments & autopilots Usable face 15.35H x 5.5W Features: Universal Helm Fixing - Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards. Secure & Watertight Install - Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry No Drill Fixing Kit - Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service - Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection - Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time. Supplied Uncut - As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.

Scanpod Slim Helm Pod - Up to 8" Display The Scanstrut Helm Pod is a perfect choice for all cockpit configurations. Usable face -11.4W x 7.5H Features:   Universal Helm Fixing  Fits pedestal rails from 25mm to 33.7mm (0.98" -1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards. Secure & Watertight Install Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry No Drill Fixing Kit Customized U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut.

Scanpod Slim Helm Pod - Up to 12" Display The Scanstrut Helm Pod is a perfect choice for all cockpit configurations. Features:  Universal Helm Fixing  Fits pedestal rails from 25mm to 33.7mm (0.98" -1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards. Secure & Watertight Install Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry No Drill Fixing Kit Customized U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut.

Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White Specifications: 4 Instrument Color: White Depth: 3.2" Usable Face: 4.3H" x 19.75W" Scanpod Range The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats Features: Simplified range - easy product selection Manufactured from acrylic caped ABS plastic - tough, durable and UV stable Tamper proof stainless fastenings - secure install without self-tapping into plastic Innovative watertight seal system - full instrument protection supplied uncut to fit any display