|
Package Wheel Nuts 1/2" - 20 - 5 Pieces - Zinc
The most commonly used wheel mounting hardware. Packaged 5 per blister pack.
Features:
Finish: Zinc
Description: Wheel Nut
Size: 1/2" - 20
|
4.81 |
|
|
Package Roller Shaft 1/2" x 5-1/4" with Cap Nuts - Zinc
Roller shafts blister packed each with two cap nuts.
Features:
Length: 5-1/4"
Max Grip: 4.690"
|
6.00 |
|
|
Chrome Acorn Wheel Nuts - 1/2"-20
The most commonly used wheel mounting hardware.
Packaged 5 per blister pack.
|
13.56 |
|
|
Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - Zinc
Roller shafts blister packed each with two cap nuts.
Features:
Length: 12-3/4"
Max Grip: 12.190"
|
6.91 |
|
|
Package Roller Shaft 1/2" x 6-1/4" with Cap Nuts - Zinc
Roller shafts blister packed each with two cap nuts.
Features:
Length: 6-1/4"
Max Grip: 5.690"
|
6.17 |
|
|
Ampco Pumps S214M-01C-E Casing For Ac214 2X1 1/2
|
1411.56 |
|
|
C.E. Smith Company
C. E. Smith Company, Inc. was established as a manufacturing firm producing precision metal stampings, fabrications and assemblies for a broad variety of industries. Stainless steel boating and fishing products are sold under the SMITH TM trademark. The line includes an adjustable, completely stainless steel t-top, fiberglass electronic boxes, t-top storage bags navigation lights and antenna bracket.
|
|
|
53696 Rod Safety Ring
Attach the C.E. Smith Rod Safety Ring to the bottom of rod holders and stop worrying about dropping your equipment.
Made to secure into the 0.5" drain hole found at the bottom of the flush-mount cast-bottom rod holder from C.E. Smith, the rod safety ring gives you a convenient place for you to tether your rod and reel, boat fender, or any other valuable you don't want to fall overboard.
Features:
Provides a convenient place to secure rods
316L Marine-grade stainless steel
Quick and easy installation
*Sold as an Individual
|
7.20 |
|
|
Stainless Steel Wheel Nut - 1"-14 Shaft Threads
Attention to detail is the keynote of these Edson Wheel Nuts. Highly polished Investment Cast 316 Stainless has superior strength as well as good looks. Measure your steering shaft thread for the correct size.
Features:
1-inch - 14 Shaft Threads.
Fits Edson Pedestal Shafts built between 1979 to 1999.
Cast 316 Stainless Steel.
Polished to a mirror finish
|
61.92 |
|
|
Black 40" Post Guide-On
C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season.
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
Built to last season after season
40" tall
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
94.58 |
|
|
60" Black PVC Post Guide-On
C.E. Smith® Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season.
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
60" Overall Height
Mounting brackets and metal uprights allow for 19” of adjustment on each side of the trailer frame.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side).
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
*Sold in pairs
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
159.16 |
|
|
Cap Nut - 1/2" 8 Pieces Zinc
Cap nuts are hammered on each end of roller shafts to create a long lasting solid connection.
Features:
Zinc plated
1/2"
8 per package
|
8.21 |
|
|
March 0156-0053-1000 Lock Nut 1/4-20
|
1.08 |
|
|
Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with Sleeve
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Horizontal
Fits rails with 1.66" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.84 |
|
|
Black 40" Post Guide-On & FREE Camo Wet Lands Guide-On Pads
This kit includes two C.E. Smith 40" Black Post Guide-Ons and two Camo Wet Lands Post Guide-On Pads. C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season. While the camo post-guide-on pads, are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
Built to last season after season
40" tall
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post-guide-on covers: Camo Wet Lands
Kit Includes:
Part 27626: C.E. Smith Black 40" Post Guide-Ons
Part 27902: C.E. Smith Post Guide-On Pad - 36" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
94.58 |
|