Extension Cable for HOOK² TripleShot/SplitShot Transducer - 10' 10' extension cable for connecting TripleShot/SplitShot Transducers to HOOK²

Extension Cable for Bullet Transducer - 10' Transducer Extension Cable for Hook2 Bullet Skimmer Transducer, 10 ft. length.

4m Extension Cable f/CPT-DV & DVS Transducer & Dragonfly 4, 5 & Wi-Fish Use Raymarine's 4m cable to extend the length of the standard cable provided with Dragonfly CPT-DV and DVS transducers.

4M Transducer Extension Cable f/CHIRP & DownVision™ Use Raymarine's 4 Meter extension cable when the transducer will not reach you CP100.

Transducer Extension Cable - 4m Adds 4 meters of length to the transducer cable. Used with the CPT-60 Dragonfly transducer. For maximum performance, Dragonfly is supplied complete with Raymarine's exclusive CPT-60 dual element CHIRP transducer.

Extension Cable f/500 Series VHF/AIS Antennas - 10' An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter. All Extension Cables for 500 Series VHF/AIS Antennas Feature: Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable Factory attached mini-UHF female and mini-UHF female connectors DA624 mini-UHF double male adapter

Extension Cable f/500 Series VHF/AIS Antennas - 20' An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter. All Extension Cables for 500 Series VHF/AIS Antennas Feature: Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable Factory attached mini-UHF female and mini-UHF female connectors DA624 mini-UHF double male adapter

Handset Extension Cable f/Ray60/70 - 10M Raymarine's 10M cable is used to extend the handset that is included with Raymarine's Ray60 and Ray70 VHF Radios.

EasyLink Extension Cable f/ OceanLink Displays Used to connect the OceanLink EasyLink gauges to OceanLink 4.3" and 7” Displays. Features: Length: .3M (1') Specifically for 7" OceanLink *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Extension Cable For LSS-1 or LSS-2 Transducer For use specifically with Lowrance's LSS-1 or LSS-2 Transducer. If the 20' transducer cable is not long enough, the 10' extension cable is available.

RealVision 3D Transducer Extension Cable - 5M(16') RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.

MM-8G Mix & Match Cable for 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end. Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced. Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models) A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector. Note that 600W Mix and Match cables cannot be used with 1kw transducers. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 10M Features: Speed, Depth and Temperature 10M Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers

RealVision 3D Transducer Extension Cable - 8M(26') RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.

Lowrance Extension Cable 25' extension cable. For use with LGC-3000 and red NMEA network.