|
Single Battery Disconnect Switch - Cup Mount
The Perko Single Battery Disconnect Switch permits the battery to be shut off from the electrical system when the vessel is not in use. They can also serve as an emergency main disconnect switch in the event of an electrical problem.
The Single Battery Disconnect Switch is Ignition Protected.
Materials & Finish
Red polycarbonate polymer body
Black polymer actuator key
Nickel plated terminals
Features
Small compact size
Unique oval shape mounts in a round hole
Removable actuator key adds additional security
Technical Information
Rating: 140 Amps Continuous, 200 Amps 5 Min. Intermittent, 250 Amps 30 Second Start
Cup Mount Installation Hole Size: 3"
For use with alternators and generators 6-50 V.D.C. Marine Electrical Systems
Ignition Protected
Face Dimensions: 3" x 2-1/2
|
51.17 |
|
|
Single Battery Disconnect Switch w/Mounting Ring & Legs - Bulkhead Mount
The Perko Single Battery Disconnect Switch permits the battery to be shut off from the electrical system when the vessel is not in use. They can also serve as an emergency main disconnect switch in the event of an electrical problem.
The Single Battery Disconnect Switch is Ignition Protected.
Materials & Finish
Red polycarbonate polymer body
Black polymer actuator key
Nickel plated terminals
Features
Small compact size
Unique oval shape mounts in a round hole
Removable actuator key adds additional security
Technical Information
Rating: 140 Amps Continuous, 200 Amps 5 Min. Intermittent, 250 Amps 30 Second Start
For use with alternators and generators 6-50 V.D.C. Marine Electrical Systems
Ignition Protected
Face Dimensions: 3" x 2-1/2"
|
45.64 |
|
|
Dual Battery Selector Switch - Cup Mount
The Perko Dual Battery Selector Switch allows the addition of an extra battery for accessories. This switch provides the flexibility of selection between batteries or combined operation of both batteries in parallel for starting or charging. It can also serve as an emergency main disconnect switch in the event of an electrical problem. All models are make before break design and are ignition protected.
Features:
For two or more batteries
Unique oval shape mounts in a round hole
Removable actuator key
|
63.20 |
|
|
Heavy Duty Battery Switches
Ignition Protected
For use with 6, 12, 24 and 32 volt marine electrical systems
Capacity - Rated 450 AMPS continuous,
1200 AMPS intermittent (15 seconds on, 5 minutes off)
Heavy Duty Battery Disconnect Switch
w/ Alternator Field Disconnect
|
177.91 |
|
|
Compact Battery Selector & Main Disconnect Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
Higher rating than popular 8500 series switches
Same bolt patterns as popular 8500 series
Smooth, Positive Position Selector
Compact, Medium Duty Main Battery Disconnect Switch
|
59.89 |
|
|
Compact Battery Selector & Main Disconnect Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
Higher rating than popular 8500 series switches
Same bolt patterns as popular 8500 series
Smooth, Positive Position Selector
Compact, Medium Duty Main Battery Disconnect Switch w/ Key Lock
|
71.12 |
|
|
Medium Duty Main Battery Disconnect Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
capacity - rated 250 amps continuous,
360 amps intermittent
Medium Duty Main Battery Disconnect Switch w/ Alternator Field Disconnect and Key Lock
|
83.86 |
|
|
Medium Duty Main Battery Disconnect Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
capacity - rated 250 amps continuous,
360 amps intermittent
Medium Duty Main Battery Disconnect Switch w/ Key Lock
|
71.12 |
|
|
Metal Body Battery Disconnect Switch SPST - 6-12V
2484 Series Battery Disconnect Switches are 36V Single Pole, Single Throw (SPST) manual disconnect switches that can be used to disconnect the battery from the vehicle electrical system. Disconnecting the battery from the electrical system prevents potential thermal events and ensures the system shuts down during maintenance or emergency. Battery disconnect switches also prevent parasitic loads from draining the battery during inactivity.
Features:
Rugged steel case
Silver-plated contacts for high conductivity and low contact resistance
Removable Hencol key for security
The anti-rotation locator pin option enables ease of mounting
O-ring and gasket sealing options
Specifications:
Current Rating (Continuous) in Amps: 40
Current Rating (Inrush) in Amps: 250
Voltage Rating (Max): 6
Circuitry: SPST
Actuator: Diecast Lever
Contact Material: Copper
Housing: Plated Steel
Mounting Stem: Brass 3/4 - 16 thread 23/32 long fits panel through 3/16 thick
|
42.35 |
|
|
Mini Contour Battery Disconnect Switch - 275A Continuous
This switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C (212°F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.
Features:
Can be either surface or recess mounted by cutting a 2.1" (52 mm) hole
Available with house knob (OEM # 701B-HB) or with chassis knob (OEM # 701B-CH)
Tin-plated copper studs and nuts
Ignition-protected
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
27.49 |
|
|
Medium Duty Battery Selector Switch w/Key Lock
Perko's 8501 Series battery selector switches are among the most popular battery switches ever produced. Their use of the traditional Perko bolt circle makes for easy installation, whether new or as a replacement. These switches can be mounted in numerous locations. And as ignition protected switches, they can be installed in the engine rooms of gasoline powered boats.
In addition to doing everything a battery disconnect switch does, battery selector switches permit battery selection (of two or more batteries) for specific purposes including starting engines, running accessories or even recharging. They allow for the use of one or more batteries in systems with one or more engines and facilitate putting batteries in parallel for emergency starting when one or both batteries are substantially discharged.
Perko battery switches are designed for surface mounting. Standard duty switches have a bright red polycarbonate housing for safety with a large easy-to-turn black knob. The housing of the heavy duty switches are red fiber-reinforced polycarbonate. Selector switches are designed with a "make before break" feature. This allows switching between the "1", the "ALL" and the "2" positions while the engine is running. Models with an "Alternator Field Disconnect" feature offer protection for Non-Unitized Alternators should the switch accidentally be turned to the "OFF" position with the engine running.
Versions of the 8501 Series switches offer additional features such as alternator disconnect and key lock security.
The 90° rotation feature allows users to feel the switches' position in no light situations and the classic shape of the knob makes it easy to turn.
High conductivity studs are long enough to handle more than 1 cable and strong enough for torque needed for secure connections. Optional spacer ring (PN 0462DP0RED) allows for the use of larger cables.
Specifications:
Diameter: 5-1/4"
Depth: 2-5/8"
For use with 6 to 50 Volt Marine Electrical Systems
Capacity - 250 AMPS Continuous, 360 AMPS Intermittent
When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running
|
73.54 |
|
|
Dual Battery Switch w/Mounting Ring & Legs - Bulkhead Mount
The Perko Dual Battery Selector Switch allows the addition of an extra battery for accessories. This switch provides the flexibility of selection between batteries or combined operation of both batteries in parallel for starting or charging. It can also serve as an emergency main disconnect switch in the event of an electrical problem. All models are make before break design and are ignition protected.
Four switch positions: Both "Off", Both "On", Battery 1 "On"/Battery 2 "Off", Battery 1 "Off"/Battery 2 "On"
Materials & Finish
Red polycarbonate polymer body
Black polymer actuator key
Nickel plated terminals
Features
For two or more batteries
Unique oval shape mounts in a round hole
Removable actuator key
Technical Information
Rating: 140 Amps Continuous, 200 Amps 5 Min. Intermittent, 250 Amps 30 Second Start
For use with alternators and generators 6-50 V.D.C. Marine Electrical Systems
Ignition Protected
Face Dimensions: 3-7/8" x 3-1/4"
|
41.99 |
|
|
Medium Duty Battery Disconnect Switch
Part #: 9601DP
Features:
Ignition Protected
For use with 12, 24 and 32 Volt Marine Electrical Systems
Capacity - 250 Amps Continuous & 360 Amps Intermittent
When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running
|
59.89 |
|
|
Panel-Mounted Battery Master Switch
Panel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution.
Compact, lightweight
Removable key
Countersunk recesses for surface mount application
Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole)
Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions
Standard interchange label system
Molded in high temperature, fiber reinforced plastics
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.07 |
|
|
Medium Duty Battery Selector Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
Capacity - 250 AMPS continuous, 360 Amp Intermittent
Medium Duty Battery Selector Switch w/ Alternator Field Disconnect
w/o Key Lock
|
74.88 |
|