|
Add-On Uncut Single Instrument Pod for Triton2
Max Usable Face: (5" x 5")
Max Cutout Area: (4.38" x 4.38")
This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments.
Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod.
Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.
|
144.00 |
|
|
Uncut Single Instrument Pod for Triton2 - Stainless Steel Clamp
Max Useable Face: (5″ × 5″)
Max Cut Out Area: (4.38″ × 4.38″)
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamps
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with the Rail Pod is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
206.40 |
|
|
Scanpod Single Instrument Pod - Uncut - Arm Mounted - Fits 1" - 1.3" Rails
Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments.
Options available to install a 7" display or standard instrument.
Arm Mounted:
Extend the Rail Pod away from narrow or crowded rails for better viewing
Designed to ensure the Pod is always positioned for best viewing, whatever the angle of the rail
|
206.47 |
|
|
Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" Rails
Features:
Applications: Designed for (1) Standard Instrument
Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments
The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you
Rail Mounted
Universal Fixing
Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33")
Fit your display onto standard and curved rails
Great Viewing Options Viewing angle can be set upon installation
Cables are routed internally through the clamp and onto the rail
Increased Protection
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time
Supplied pre-cut with a 91mm diameter hole to accept all major brands of standard sized instrument heads
|
143.58 |
|
|
Add-On Instrument Pod - Uncut
Max Usable Face: 4.625" x 4.625"
Max Cut Out Area: 4.125" x 4.125"
This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments.
Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod.
Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.
|
120.00 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 4.625" x 4.625"
Max Cut Out Area: 4.125" x 4.125"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
187.20 |
|
|
Instrument Pod for 2 Clipper Instruments
CLZ-POD
Robust POD moulding to suit 2 x Clipper Cockpit display units. Suitable for open cockpit mounting.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
62.30 |
|
|
Seaview DPOD Deck Power Pod Box
Max Usable Face: 14.75" x 5"
Max Cut Out Area: 13.875" x 4.125"
The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.
Rotating Base
The quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!
Construction
The DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this DPOD is the ability to add optional side pods (part #SP1BOX). Currently no other deck pod on the market has this feature. This optional add-on will fit single instruments 4.125" x 4.125" or smaller. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
297.60 |
|
|
Scanpod Instrument Pod - Uncut - Arm Mounted - Fits 1" - 1.3" Rails
Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments.
Options available to install a 7" display or standard instrument.
Arm Mounted:
Extend the Rail Pod away from narrow or crowded rails for better viewing
Designed to ensure the Pod is always positioned for best viewing, whatever the angle of the rail
|
386.89 |
|
|
Scanpod Slim Deck Pod - f/10" to 12" Display - White
Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.
Features:
Fits 10” to 12” displays
Usable face 14W x 9.6H
Swivel & Tilt Base
One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position
Best viewing angle
An adjustable ball joint allows range of movement and multiple mounting angles
Added Strength
Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration
Overhead mounting
Deck Pod models can be overhead mounted.
Hassle Free Install & Service
Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
Increased Protection
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time.
Supplied Uncut
As standard you will receive your Scanpod uncut
|
450.42 |
|
|
SystemPod Pre-Cut f/Raymarine Axiom 9/Axiom+ 9 on Right & 1 Instrument (3.6″ hole) on Left f/12″ Wide Guard (Pre-Cut is for Surface Mount using the rear mounting brackets)
SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.
A SystemPod is best mounted on a Single Bend AngleGuard.
Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!
Commitment to quality: We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.
|
401.44 |
|
|
SystemPod Pre-Cut for Garmin GPSMAP® 923, 923xsv, 943 & 943xsv on Right & 2 Instruments (3.6″ holes) for 9.5″ Wide Guard
GP1080-35 for Sail: SystemPod Pre-Cut for Garmin GPSMAP 923/923xsv/943/943xsv *on the right AND* two instruments (3.6″ holes) for 9.5″ wide guard
SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.
This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit.
Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!
Commitment to quality
|
462.53 |
|
|
SystemPod Pre-Cut for Garmin GPSMAP® 1223, 1223xsv, 1243 & 1243xsv on Right & 2 Instruments (3.6″ holes) on Left for 9.5″ Wide Guard
GP1170-25 for Sail: SystemPod Pre-Cut for Garmin GPSMAP 1223/1223xsv/1243/1243xsv on the right AND two instruments (3.6″ holes) on the left for 9.5″ wide guard
SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.
This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit.
Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!
Commitment to quality
We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.
|
462.53 |
|
|
GP2055 SailPod f/Garmin GPSMAP 5012 & 5212 for 12" Guards
NavPod Protects Your Electronics In Harsh Conditions
Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach.
Dimensions (15.125"w x 10.88"h x 6.125"d).
|
392.71 |
|
|
SUPRAX SUP Storage System - Dual Board Add-On
Stand Up Paddle Board Storage System
You've invested a lot of money into your beautiful boat. Why would you secure your SUP with ugly bungee cords? And that big board sure does take up valuable deck space. You need a storage system that is as stylish as the rest of your vessel.
Features:
Secure your board to your boat or your wall
061 Aluminum Alloy, sandblasted anodized
Heat press, diecut, EVA protective foam
Heavy duty shock cords keep boards in place
Fits 7/8" and 1" rails
Unique rotating clamp allows for mounting on angled stanchions
Dual Board Add-On Package Includes:
Two Add-On Racks for a Second Board - Sandblasted anodized 6061 aluminum with diecut EVA protective foam
Mounting Hardware & Bungee Cords - Easily attach racks to existing single rack system*, and secure with bungee cords
*Single Rack System (#50050) sold seperately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
152.00 |
|