9-Pin Black to 7-Pin Blue Adapter Cable f/XID Transducers Connects XSONIC Transducers to 7-Pin Blue Units Use with Airmar Chirp transducers

Y Cable for 2 CHIRP Transducers for CP470/CP570 Raymarine Y Cable specifically for two CHIRP transducers for Raymarine's CP470 and CP670.

Adapter Cable for CPT-S Transducers To Axiom Pro S Series Units Adapter Cable (25 pin to 9 pin) attach DownVision (CPT-1xx) transducer to Axiom RV. Features: Type: 25 pin to 9 pin Applications: DownVision (DV) and RealVision (RV) Transducers Function: Connect DownVision or CHIRP Transducer to an Axiom RealVision Display Length: 0.3 meters

4-Pin Female to 5-Pin Male NMEA 2000® Adapter Cable for echoMAP™ CHIRP 5Xdv Connect your compatible 5-inch echoMAP™ CHIRP chartplotter/sounder combo to a NMEA 2000 network with this 6 foot (2 meters) adapter cable. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adapter Cable for Minn Kota Transducer to Element 15-Pin Raymarine Adapter cable for Minn Kota Transducer to Element HV display.

Navico 9-Pin Mix & Match Chirp Cable - 1M Airmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide Transducers Features: Length: 1M 9-Pin for Med, High, and Highwide Transducers, Single Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Navico 9-Pin Dual Mix & Match Cable for Dual Element Transducers For dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP Transducers Many CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable. The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end. Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced. Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Adapter 7-Pin Blue Transducer to a 9-Pin Black Unit Features: Connects legacy 7-Pin Blue Transducer to a 9-Pin Black Unit Sonic Connector Transducer Adapter Cable Compatible With: HDS Gen3 Elite-Ti Series NSS evo2 GO XSE Series SonarHub™

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XID Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DSM30 & DSM300 Transducer Adapter Cable The DSM30/DSM300 Transducer Adapter Cable allows you to utilize Raymarine's wide offering of specialty and high performance in-hull, through-hull or transom mount transducers with our new MFDs with built-in sounder. This adapter is also perfect for occaisions where a new sounder-equipped Raymarine MFD is replacing both an old display and DSM. Adapter cable adapts DSM30/DSM300 transducers to A series Transducers

8-Pin Female to Wire Block Adapter Garmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Used in applications where the a plastic thru the hull transducer is required on a boat with a deep V hull or the motor or other items on the transom of the boat may block one side of the transducer and distort readings.    30" length. Supports MEGA Side Imaging. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9 M SIDB Y - 9-Pin Side Imaging Dual Beam Splitter Cable Y Cable - Side Imaging and Dual Beam - allows you to use two transducers on one unit without the use of a transducer switch.  For use with Side Imaging products only, in conjunction with a dual beam transducer only.  For improved high speed performance for bottom tracking.  30" length. Supports MEGA Side Imaging. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XNT-9-HW-MSI-150-T MEGA SI/DI Dual Spectrum CHIRP Transducer with Temp f/HELIX® 7/8 MEGA SI  Transom Mount, MEGA Down Imaging, 455 kHz and 1.2 MHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature. Compatible with: HELIX 7 CHIRP MEGA SI GPS G3/G4, HELIX 7 CHIRP MEGA SI GPS G3N/G4N.  Features: Compatible with: HELIX 7 CHIRP MSI GPS G3, HELIX 7 CHIRP MSI GPS G3N, HELIX 7 CHIRP MSI GPS G4, HELIX 7 CHIRP MSI GPS G4N Cable Length:  20 Feet Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz Dual Spectrum CHIRP Max Depth: 1200ft (365m) Side Imaging Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (146m), MEGA SI: 1075-1150 kHz - 250ft (76m) Down Imaging Frequencies - Max Depth: 455kHz: 440-500 kHz - 125ft (38m), MEGA DI: 1075-1150 kHz - 75ft (23m) WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP™ CHIRP Connect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP™ CHIRP chartplotter/sonar combo. This adapter cable allows the echoMAP CHIRP to continue to display water depth from the in-hull transducer in instances when the transom mount transducer loses depth reading due to cavitation. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.