|
Pontoon 30" Flag Pole Mount & 16" x 24" US Flag
Developed with the Pontoon Boater in mind, this injection molded, black nylon mount attaches easily to the top of your pontoon railing and features a 10° presentation angle. The 3/4" diameter bright dipped anodized aluminum pole simply snaps into the base and features color matched Charlevoix flag clips.
The 30" comes complete with a 16" x 24" sewn U.S. Flag.
|
67.16 |
|
|
Pontoon 24" Flag Pole Mount & 12" x 18" US Flag
Developed with the Pontoon Boater in mind, this injection molded, black nylon mount attaches easily to the top of your pontoon railing and features a 10° presentation angle. The 3/4" diameter bright dipped anodized aluminum pole simply snaps into the base and features color matched Charlevoix flag clips.
The 24" model includes a 12" x 18" sewn U.S. Flag.
|
53.40 |
|
|
16" x 24" Deluxe Sewn US Yacht Ensign Flag
These deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.
Features:
Individually Sewn Stripes
Embroidered Stars
Brass Grommets
Four-Needle Flyend
|
26.24 |
|
|
16" x 24" Deluxe Sewn 50 Star Flag
These deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.
Features:
Individually Sewn Stripes
Embroidered Stars
Brass Grommets
Four-Needle Flyend
|
26.95 |
|
|
Teak Flag Pole - 3/4" x 18"
Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil.
Features:
Made from the finest grade A, kiln-dried teakwood
No deteriorating or warping
|
19.58 |
|
|
Pontoon Curved Corner-Gard - 3"W x 12"L
This unique Corner-Gard offers a level of protection to areas on the Pontoon boat other fenders or bumpers can't provide. The Pontoon Corner-Gard comes shaped to mount on either a radius style or 90o pontoon corners. The Corner-Gard mounts over the original factory installed aluminum corner section to provide air-cushioning impact protection when docking. Special silver PVC formulated to match the aluminum color of the boat and secures with the included stainless fasteners.
Specifications:
Dimensions: 3"W x 12"L
Mounting hardware included
|
29.34 |
|
|
16" x 24" Super Strong Trim Tab Kit w/o Switch -24V - Dual Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15063-002 (Super Strong 24-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 35' to 50'
Length of Tab: 16"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 24-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1698.67 |
|
|
16" x 24" Super Strong Trim Tab Kit w/o Switch -12V -Dual Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15056-002 (Super Strong 12-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 35' to 50'
Length of Tab: 16"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1696.13 |
|
|
1-1/4" Flush Mount Flag Pole Socket
Made from beautiful long lasting T316 polished stainless steel
Insets nearly flush to the deck
60° angle
|
28.44 |
|
|
XD Flag Pole
Specifications:
• 42” Rod Holder Flag Pole
• Holds two 12” sandbar flags or one 20”x 24” dive flag
• Gimbal butt makes flying in any rod holder a breeze
• Made of anodized aluminum
• Easy to store
|
50.53 |
|
|
HX Rod Holder Flag Pole - 54"
Features:
Gimbal butt makes flying in any rod holder a breeze
Made of anodized aluminum
Easy to store
Fits standard 1-5/8” rod holders
54” Rod Holder Flag Pole
Holds 36" x 60" sandbar flag or 20”x24” dive flag
|
60.31 |
|
|
Stainless Steel Rail Mount Flag Pole Sockets
Designed to securely fasten to 7/8" to 1" rails. This model is perpendicular to the rail and is made for 1" diameter flag poles.
Specifications:
Rails (inch): 7/8" to 1" rails
Flag Staff (inch): 1"
|
35.99 |
|
|
Teak Flag Pole - 1" x 24"
Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil.
Features:
Made from the finest grade A, kiln-dried teakwood
No deteriorating or warping
|
22.19 |
|
|
Teak Flag Pole - 1" x 30"
Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil.
Features:
Made from the finest grade A, kiln-dried teakwood
No deteriorating or warping
|
29.40 |
|
|
Pontoon Gazebo - Pacific Blue
A quick and easy way to gain additional shaded area on your pontoon boat. Top accommodates both 96" and 102" wide boats and extends out to 8ft. of coverage. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is supported by shock-corded fiberglass pole framework that breaks down for convenient storage. The large interior radius allows you to sit comfortably without bending over and provides excellent headroom. After initial installation of permanently mounted hardware to your playpen rail, the Pontoon Gazebo attaches easily and comes down in minutes. Comes complete with shade top, frame, marine grade hardware and storage bag, and is available in nine colors to best match your boat. The gazebo measures 9' long by 102" wide by approximately 50" high from mounting point.
|
189.95 |
|