GT20-TM Transom Mount DownVü 500W (CHIRP 455/800kHz); Traditional 500W (77/200kHz) Transducer w/Temp - 8-Pin Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 8-pin transducer. This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer w/Temp - 4-Pin Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

STRIKER™ Vivid 4cv Fishfinder with GT20-TM See fish and structure in colorful detail with the STRIKER™ Vivid 4cv fishfinder. This easy-to-use 4” device now features high-contrast color palettes to make it easier to see what’s beneath the surface. It includes a GT20 transducer for best-in-class Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar. High-sensitivity GPS lets you mark hot spots, plan routes and view your boat’s speed. Create and save maps with 1’ contours with built-in Quickdraw Contours software. STRIKER Vivid 4cv includes tilt/swivel mount plus transom and trolling motor mounting hardware and cable. Features: Easy-to-use 4-inch color fishfinder with new vivid scanning sonar color palettes to easily distinguish fish and structure; tilt/swivel bailmount bracket included Includes a GT20 transducer for built-in Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar High-sensitivity GPS to mark waypoints, create routes and view your boat’s speed Includes built-in Quickdraw Contours mapping GT20-TM Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp - 4-Pin Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20' transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. In The Box STRIKER Vivid 4cv fishfinder GT20-TM transducer Power/data cable Tilt/swivel mount Hardware Documentatio

STRIKER™ Vivid 5cv Fishfinder with GT20-TM  See fish and structure in colorful detail with the STRIKER™ Vivid 5cv fishfinder. This easy-to-use 5” device now features high-contrast color palettes to make it easier to see what’s beneath the surface. It includes a GT20 transducer for best-in-class Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar. High-sensitivity GPS lets you mark hot spots, plan routes and view your boat’s speed. Create and save maps with 1’ contours with built-in Quickdraw Contours software. STRIKER Vivid 5cv includes tilt/swivel mount plus transom and trolling motor mounting hardware and cable. Features: Easy-to-use 5” color fishfinder with new vivid scanning sonar color palettes to easily distinguish fish and structure; tilt/swivel bailmount bracket included Includes a GT20 transducer for built-in Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar High-sensitivity GPS to mark waypoints, create routes and view your boat’s speed Includes built-in Quickdraw Contours mapping GT20-TM Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp - 4-Pin Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20' transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. In The Box STRIKER Vivid 5cv fishfinder GT20-TM transducer Power/data cable Tilt/swivel mount Hardware Garmin bumper sticker Documentation

STRIKER™ Vivid 7cv Fishfinder with GT20-TM See fish and structure in colorful detail with the STRIKER™ Vivid 7cv fishfinder. This easy-to-use 7” device now features high-contrast color palettes to make it easier to see what’s beneath the surface. It includes a GT20 transducer for best-in-class Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar. High-sensitivity GPS lets you mark hot spots, plan routes and view your boat’s speed. Create and save maps with 1’ contours with built-in Quickdraw Contours software. Built-in Wi-Fi® connectivity allows you to connect to the ActiveCaptain® app1 to transfer waypoints, receive smart notifications and access the Garmin Quickdraw™ Community. STRIKER Vivid 7cv includes tilt/swivel mount plus transom and trolling motor mounting hardware and cable. Features: Easy-to-use 7” color fishfinder with vivid scanning sonar color palettes to easily distinguish fish and structure; tilt/swivel bailmount bracket included Includes a GT20 transducer for built-in Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar High-sensitivity GPS to mark waypoints, create routes and view your boat’s speed Includes built-in Quickdraw Contours mapping Wi-Fi® connectivity allows you to connect to the ActiveCaptain® app1 to transfer waypoints, receive smart notifications (including software update notifications) and access the Garmin Quickdraw™ Community 1 Requires app on your compatible smartphone paired to the STRIKER™ Vivid 7cv fishfinder; see Garmin.com/ble Wi-Fi is a registered trademark of the Wi-Fi Alliance. GT20-TM Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp - 4-Pin Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20' transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.

GT51M-TM Transom Mount DownVü/SideVü 500W (CHIRP 260/455 kHz) Traditional 600W Mid-Band CHIRP 80-160 kHz Transducer with Temp - 12-Pin The GT51M-TM transom mount transducer provides ultra-clear sonar pictures of objects, structure and fish that pass below your boat. This traditional CHIRP and CHIRP DownVü/SideVü transducer is optimized for depth performance and rough condidtions. The CHIRP DownVü/SideVü elements have a power rating of 500W per element (1,500W total) and operating frequencies of 260/455 kHz. The traditional CHIRP sonar has a power rating of 600W and operating frequencies of mid-band CHIRP 80-160 kHz. It also includes a built-in fast response temperature sensor. GT51M-TM includes a 12-pin transducer with mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Airmar B175H 12° Tilt, 1kW CHIRP High, 130-210kHz Thru-Hull Transducer with Temp Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies. An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 1,200 ft; an operating frequency of 130-210 kHz; a beamwidth of 9-15 degrees; and a 8 to 15 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GT21-TM Transom Mount Transducer, Traditional 600W, 50/200kHz, ClearVü CHIRP 500W, 260 & 455kHz Perfect for coastal and offshore fishermen who want traditional sonar and CHIRP ClearVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The CHIRP ClearVü element has a power rating of 500W and operating frequencies of 260/455 kHz. The traditional sonar has a power rating of 600 W and operating frequencies of 50/200 kHz. It also includes a built-in fast response temperature sensor. GT21-TM includes an 8-pin transducer with mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GT56UHD-TM Transom Mount Transducer Less time finding. More time fishing. The GT56 transducer is the ultimate all-in-one sonar solution, featuring Ultra High-Definition SideVü scanning sonar with 20% greater range at 1 MHz, Ultra High-Definition ClearVü scanning sonar and amazingly clear high wide CHIRP traditional sonar. With three scanning sonar frequencies, you’ll get top performances at all depths. High wide CHIRP traditional sonar shows crisp fish arches with minimal noise for incredible clarity. Vivid scanning sonar color palettes make it easier than ever to distinguish targets and structure. This transducer includes transom and trolling motor mounts. Features: Get Ultra High-Definition SideVü scanning sonar with 20% greater range at 1 MHz, Ultra High-Definition ClearVü scanning sonar and amazingly clear high wide CHIRP traditional sonar High wide CHIRP traditional sonar provides remarkably clear target separation and definition up to 800’ below your boat 455 kHz SideVü scanning sonar lets you see up to 500’ on each side of your boat Three scanning sonar frequencies — 455 kHz, 800 kHz and 1 MHz — and 500 watts of power deliver top performances at all depths Vivid scanning sonar color palettes make it easy to distinguish targets and structure Easy to install with transom and trolling motor mounts

TM275LHW Transom Mount CHIRP Transducer with Temp - 12-Pin Connector for TZT3 The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the TM275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers. The TM275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency. Features: Plastic Transom Mount CHIRP Transducer with Temp Low Freq: 42-65 kHz High Freq: 150-250 kHz This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GT15M-TM Transom Mount Transducer - 8-Pin GT15M-TM transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation to depth up to 1,900 feet. The 8-pin transducer features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be mounted on the transom. Follow the included installation instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GT36UHD-TM Transom Mount Transducer Less time finding. More time fishing. The GT36 transducer offers ultimate versatility, featuring Ultra High-Definition SideVü scanning sonar with 20% greater range at 1 MHz and Ultra High-Definition ClearVü scanning sonar for top performances at all depths. Vivid scanning sonar color palettes make it easier than ever to distinguish targets and structure. This transducer includes transom and trolling motor mount hardware. Features: Get Ultra High-Definition SideVü scanning sonar with 20% greater range at 1 MHz and Ultra High-Definition ClearVü scanning sonar 455 kHz SideVü scanning sonar lets you see up to 500’ on each side of your boat Three scanning sonar frequencies — 455 kHz, 800 kHz and 1 MHz — deliver top performances at all depths Vivid scanning sonar color palettes make it easy to distinguish targets and structure Easy to install with transom and trolling motor mount hardware

Garmin GT30-THP - Stainless Steel Thru-hull Pair DownVü/SideVü 500W (CHIRP 455/800 kHz) Scanning Transducers with Temp, for Hull Deadrises from 5° to 25° (12-pin) Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with these 12-pin thru-hull transducer with stainless steel stems. These transducers with built-in fast response temperature sensors have a power rating of 500 W per element (1,500 W total); a depth of 750 ft (DownVü) and 500 ft left and right (SideVü); an operating frequency of CHIRP 455/800 kHz; for hull deadrises from 5 degrees to 25 degrees. Pair them with your GCV™ 10 scanning sonar module. Includes 12-pin port and starboard transducers with stainless steel stems, isolation bushings, fairing blocks, Y-cable, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. Compatible Devices: GCV™ 10 Scanning Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Garmin GT30-TH - Stainless Steel Thru-hull DownVü/SideVü 500W (CHIRP 455/800 kHz) Scanning Transducer with Temp, for Hull Deadrises Less Than 5° (12-pin) Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with this 12-pin thru-hull transducer with stainless steel stem. This transducer with built-in fast response temperature sensor has a power rating of 500 W per element (1,500 W total); a depth of 750 ft (DownVü) and 500 ft left and right (SideVü) an operating frequency of CHIRP 455/800 kHz; for hull deadrises less than 5 degrees. Pair it with your GCV™ 10 scanning sonar module. Includes transducer with stainless steel stem, fairing block, isolation plate and bushings, extension cable, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. Compatible Devices: GCV™ 10 Scanning Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

STRIKER™ 4 Portable Fishfinder Bundle with 77/200kHz Transducer 3.5-inch CHIRP Fishfinder with GPS and Portable Kit Features: Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS Portable carrying case is perfect for kayak, canoe or ice fishing Find fish; mark and return to hot spots, docks and ramps Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak) Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately) STRIKER 4 fishfinder with portable carrying case is perfect for fishing from a kayak or canoe and is especially handy for ice fishing. Mark and return to your hot spots, boat ramps and docks. You also can share your favorite waypoints and routes with other STRIKER and echoMAP™ chartplotter combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Includes carrying case, rechargeable battery, CHIRP (77/200 kHz) transducer, tilt/swivel mount and transom and trolling motor mounting kit. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately). Experience the Clarity of CHIRP STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation. You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below. Mark Spots with High-Sensitivity GPS Unlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish. Navigate Easily with Waypoint Map Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp. Check Your Speed on Screen You can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas. Fish Vertically with Built-in Flasher STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it. Take Your Fishfinder Anywhere The portable kit protects and carries your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float. In The Box STRIKER 4 Dual-beam transducer Tilt/swivel mount Portable bag Base/handle Suction cup mount Foam float Kayak In-hull Transducer Mount Power cable Rechargeable battery AC charger Documentation Connections Transducer pin numbers: 4 Pin WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.