Fresh Head Conversion Kit - Raw-Pressurized Fresh - Converts PHII, PH, PHC, CPII & CP Features: Conversion Applications: PHII, PH, PHC, CPII and CP Model Toilets Converts Toilet Water Supply from Raw Water to Pressurized Fresh Water Kit Includes Everything Required for Water Source Changeover Kit Includes: Pump Assembly (Model # 25200) Flapper Valve Assembly (Model # 1228CW) Spud Assembly (Model # 1236W) Atmospheric Breaker cover (Model # 168006) Atmospheric Breaker (Model # 221300) Breaker O-ring (Model # 221331) Pump Cover (Model # 25214) Handle Assembly (Model # 25221) Handle screw key (Model # FT001) Hose inlet 1/2" (Model # PLF-50P) 1/4" x 20 x 1" screw (Model # F099) Flapper valve washer (Model # 1226C) Nut 1/-20 Hex 18-8 SS (Model # 1226B) Nylon nut (Model # 25309) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fresh Head - Fresh Water Flush - Manual - Marine Size - Right Hand Operation Fresh Head is a manual marine toilet designed to be flushed with pressurized fresh water. Freshwater flushing provides an odor free flush since no sealife can decay in the rim of the bowl. Discharge pump is a diaphragm pump with telescopic handle for ease in flushing. The pump can be locked to prevent waste water back flow. With a diaphragm type pump and telescopic handle, flushing is extremely easy. Owners choose how much water to use. A lever allows water into the bowl to pre-wet it for a better flush. A built-in freshwater backflow prevention includes a vacuum break. A lock-out feature stops backflow coming in through the discharge when not in use. Raritan products are chosen by powerboat, sailboat, houseboat, and RV owners and manufacturers the world over for their dependability, environmental responsibility, simplicity of installation, operation, and maintenance. The product line includes house-hold style toilets, marine toilets, marine sanitation devices and systems, cleaning products, icemakers, water heaters, and rudder angle indicators. Features: The first manual marine toilet to utilize pressurized fresh water - eliminates calcium deposits in discharge hose Footprint is a direct replacement for competitive models No Thru Hulls necessary when installed with a holding tank Low water use toilet Available as Left hand side pump PHII toilets can be retrofitted by purchasing the retro-fit pump Lock feature prevents potential backflow and possible flooding Specifications: Rinse Water For Inlet: 1/2" FPT Maximum Pressure: 150 PSI (10 bar) Minimum Pressure: 3 GPM (11.3 L/min) @ 10 PSI (0.7 bar) Discharge: 1-1/2" Hose Maximum Height: 15 ft (4.5 m) Average Water Consumption Per Use: 1 pint (.47 L) for liquid use, 3.4 G (2.8 L) for solid use WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fresh Head - Fresh Water Flush - Manual - Marine Size - Left Hand Operation Fresh Head is a manual marine toilet designed to be flushed with pressurized fresh water. Freshwater flushing provides an odor free flush since no sealife can decay in the rim of the bowl. Discharge pump is a diaphragm pump with telescopic handle for ease in flushing. The pump can be locked to prevent waste water back flow. With a diaphragm type pump and telescopic handle, flushing is extremely easy. Owners choose how much water to use. A lever allows water into the bowl to pre-wet it for a better flush. A built-in freshwater backflow prevention includes a vacuum break. A lock-out feature stops backflow coming in through the discharge when not in use. Raritan products are chosen by powerboat, sailboat, houseboat, and RV owners and manufacturers the world over for their dependability, environmental responsibility, simplicity of installation, operation, and maintenance. The product line includes house-hold style toilets, marine toilets, marine sanitation devices and systems, cleaning products, icemakers, water heaters, and rudder angle indicators. Features: The first manual marine toilet to utilize pressurized fresh water - eliminates calcium deposits in discharge hose Footprint is a direct replacement for competitive models No Thru Hulls necessary when installed with a holding tank Low water use toilet Available as Left hand side pump PHII toilets can be retrofitted by purchasing the retro-fit pump Lock feature prevents potential backflow and possible flooding Specifications: Rinse Water For Inlet: 1/2" FPT Maximum Pressure: 150 PSI (10 bar) Minimum Pressure: 3 GPM (11.3 L/min) @ 10 PSI (0.7 bar) Discharge: 1-1/2" Hose Maximum Height: 15 ft (4.5 m) Average Water Consumption Per Use: 1 pint (.47 L) for liquid use, 3.4 G (2.8 L) for solid use

Fresh Head - Fresh Water Flush - Manual - Household Style - Right Hand Operation Fresh Head is a manual marine toilet designed to be flushed with pressurized fresh water. Freshwater flushing provides an odor free flush since no sealife can decay in the rim of the bowl. Discharge pump is a diaphragm pump with telescopic handle for ease in flushing. The pump can be locked to prevent waste water back flow. With a diaphragm type pump and telescopic handle, flushing is extremely easy. Owners choose how much water to use. A lever allows water into the bowl to pre-wet it for a better flush. A built-in freshwater backflow prevention includes a vacuum break. A lock-out feature stops backflow coming in through the discharge when not in use. Raritan products are chosen by powerboat, sailboat, houseboat, and RV owners and manufacturers the world over for their dependability, environmental responsibility, simplicity of installation, operation, and maintenance. The product line includes house-hold style toilets, marine toilets, marine sanitation devices and systems, cleaning products, icemakers, water heaters, and rudder angle indicators. Features: The first manual marine toilet to utilize pressurized fresh water - eliminates calcium deposits in discharge hose Footprint is a direct replacement for competitive models No Thru Hulls necessary when installed with a holding tank Low water use toilet Available as Left hand side pump PHII toilets can be retrofitted by purchasing the retro-fit pump Lock feature prevents potential backflow and possible flooding Specifications: Rinse Water For Inlet: 1/2" FPT Maximum Pressure: 150 PSI (10 bar) Minimum Pressure: 3 GPM (11.3 L/min) @ 10 PSI (0.7 bar) Discharge: 1-1/2" Hose Maximum Height: 15 ft (4.5 m) Average Water Consumption Per Use: 1 pint (.47 L) for liquid use, 3.4 G (2.8 L) for solid use WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fresh Head - Fresh Water Flush - Manual - Household Style - Left Hand Operation Fresh Head is a manual marine toilet designed to be flushed with pressurized fresh water. Freshwater flushing provides an odor free flush since no sealife can decay in the rim of the bowl. Discharge pump is a diaphragm pump with telescopic handle for ease in flushing. The pump can be locked to prevent waste water back flow. With a diaphragm type pump and telescopic handle, flushing is extremely easy. Owners choose how much water to use. A lever allows water into the bowl to pre-wet it for a better flush. A built-in freshwater backflow prevention includes a vacuum break. A lock-out feature stops backflow coming in through the discharge when not in use. Raritan products are chosen by powerboat, sailboat, houseboat, and RV owners and manufacturers the world over for their dependability, environmental responsibility, simplicity of installation, operation, and maintenance. The product line includes house-hold style toilets, marine toilets, marine sanitation devices and systems, cleaning products, icemakers, water heaters, and rudder angle indicators. Features: The first manual marine toilet to utilize pressurized fresh water - eliminates calcium deposits in discharge hose Footprint is a direct replacement for competitive models No Thru Hulls necessary when installed with a holding tank Low water use toilet Available as Left hand side pump PHII toilets can be retrofitted by purchasing the retro-fit pump Lock feature prevents potential backflow and possible flooding Specifications: Rinse Water For Inlet: 1/2" FPT Maximum Pressure: 150 PSI (10 bar) Minimum Pressure: 3 GPM (11.3 L/min) @ 10 PSI (0.7 bar) Discharge: 1-1/2" Hose Maximum Height: 15 ft (4.5 m) Average Water Consumption Per Use: 1 pint (.47 L) for liquid use, 3.4 G (2.8 L) for solid use

Conversion Kit Convert Jabsco manual toilet compact and regular bowl models to full electric operation without the need to alter existing inlet or discharge seacocks. Also converts most toilets with 4 bolt screw pattern on a 3-3/4" diameter bolt circle such as Graco, Raritan, Wilcox Crittenden, Mansfield and Sealand Push button flushing for ease and simplicity of operation Comprehensive kit has all necessary parts, including flushing pump, macerator pump, switch, adaptors, clamps hose and fastening Flushing pump self-priming up to 4ft vertical lift May be installed 3ft below the waterline For installations fitted with vented loops use a solenoid valve on inlet hose Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) Fitting:Connections for 5/8" - 3/4" ID inlet hose, 1" - 1-1/2" ID outlet Hose Size: 13-1/4" long x 8-1/4" wide x 3-1/4" high WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

LectraSan® Conversion Kit Raritan's LectraSan® EC to MC Conversion Kit. Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AquaT Conversion Kit - 12V Converts manual toilets to electric toilets. Features: 12V

Standard Electric Toilet Conversion Kit - 12V Converts your manual or silent electric toilet to a 12V one cycle electric operated version. Features: Including all you need for a new assembly, also the one push electrical control panel Specifications: Weight: 2.44 kg/6 lbs Port Connections: Inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″) *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Standard Electric Toilet Conversion Kit - 24V Converts your manual or silent electric toilet to a 24V one cycle electric operated version. Features: Including all you need for a new assembly, also the one push electrical control panel. Specifications: Port Connections: Inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″) Weight: 2.44 kg/6 lbs *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Pro-Fish Windlass Conversion Kit Lewmar upgrade kit converts a Pro-Series (Series 700 and 1000) windlass to a Pro-Fish freefall windlass. The kit can only be fitted to Pro-Series (Series 700 and 1000) units made from Oct 2006 onwards. *To check compatibility undo the gypsy nut and check to see if there is a drilled threaded hole at the end of the shaft.  If no hole is visible then this cannot be retrofitted. Features: Expertly crafted from premium materials Designed to match rigorous quality standards High quality at a budget-friendly price *Sold as an Individual 

Boat Leveler to Bennett Actuator Conversion Kit - Hydraulic to Hydraulic Bennett Marine's V351CK conversion kit replaces Boat Leveler cylinders with Bennett though-hull fittings. Kit includes: 2 hydraulic cylinders and all hardware to convert your system 2 stainless steel conversion brackets 8 1/4-20 x 1/2 machine screws 4 1/4-20 x 3/4 wood screws 2 3" pipe nipples 2 female barb fittings 2 actuators WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

E1 Single Speed Electric Motor Conversion Kit for 28ST Winch - 12V The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.  Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.  This conversion kit fits an Andersen 28ST winch ** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

E1 Single Speed Electric Motor Conversion Kit for 28ST Winch - 24V The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.  Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.  This conversion kit fits an Andersen 28ST winch ** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

E1 Single Speed Electric Motor Conversion Kit for 34ST Winch - 12V The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.  Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.  This conversion kit fits an Andersen 34ST winch ** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **