|
Scanpod 7" Helm Pod Rail Mount
Features:
Applications: Designed for (1) 7" Instrument
Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments
The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you
Rail Mounted
Universal Fixing
Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33")
Fit your display onto standard and curved rails
Great Viewing Options Viewing angle can be set upon installation
Cables are routed internally through the clamp and onto the rail
Increased Protection
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time
Supplied Uncut - As standard you will receive your Scanpod uncut
|
348.14 |
|
|
Rail Mount #1027
Scotty's #1027 Rail Mounts fits up to 1-1/2" round rail, or oval-shaped wooden rails. It is easily installed and removed for storage. The wooden board (not included) transfers the downward pressure to the boat gunnel.
Fits all Scotty downriggers and can be used with Scotty's #1026 Pedestal Swivel Mount.
Dimensions: 6-1/8" x 7-1/8"
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
50.32 |
|
|
Scanpod Helm Pod 3 Instrument Uncut - White
With great features, the Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the Helm Pod is the right choice for you.
For Displays & Standard Instruments:
3 x standard navigation instruments & autopilots
Usable face 15.35H x 5.5W
Features:
Universal Helm Fixing - Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards.
Secure & Watertight Install - Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry
No Drill Fixing Kit - Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Hassle Free Install & Service - Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
Increased Protection - Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time.
Supplied Uncut - As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.
|
296.33 |
|
|
Scanpod Slim Helm Pod - Up to 8" Display
The Scanstrut Helm Pod is a perfect choice for all cockpit configurations.
Usable face -11.4W x 7.5H
Features:
Universal Helm Fixing
Fits pedestal rails from 25mm to 33.7mm (0.98" -1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards.
Secure & Watertight Install
Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry
No Drill Fixing Kit
Customized U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Hassle Free Install & Service
Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
Increased Protection
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time.
Supplied Uncut
As standard you will receive your Scanpod uncut.
|
367.84 |
|
|
Scanpod Slim Helm Pod - Up to 12" Display
The Scanstrut Helm Pod is a perfect choice for all cockpit configurations.
Features:
Universal Helm Fixing
Fits pedestal rails from 25mm to 33.7mm (0.98" -1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards.
Secure & Watertight Install
Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry
No Drill Fixing Kit
Customized U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Hassle Free Install & Service
Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
Increased Protection
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time.
Supplied Uncut
As standard you will receive your Scanpod uncut.
|
416.11 |
|
|
Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White
Specifications:
4 Instrument
Color: White
Depth: 3.2"
Usable Face: 4.3H" x 19.75W"
Scanpod Range
The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats
Features:
Simplified range - easy product selection
Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
Tamper proof stainless fastenings - secure install without self-tapping into plastic
Innovative watertight seal system - full instrument protection supplied uncut to fit any display
|
336.83 |
|
|
ScanPod Uncut Fits .98" to 1.33" Rail with Switches, Small Screens & Remote Controls
The cleanest way to mount your small electronics on a rail. The Rail Pod allows you to install your small screens, switches, controllers, chain counters, and more onto any standard or curved rail. Waterproof internal cable routing allows you to seamlessly run your cables through the bottom of the pod, the machined aluminum clamp, and into the rail.
Waterproof internal cable routing allows you to seamlessly run your cables through the bottom of the pod, this gives you the cleanest and most user-friendly way to mount your small electronics right where you need it the most. Some additional work may be required to the cables and connectors of the device to ensure a suitable fit.
Pod seal is manufactured from a high tear strength silicone; it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.
Features:
As standard, you will receive your SPR-1u-RM uncut
Fits rails from 25mm to 33.7mm (0.98” to 1.33”). Fit your electronics onto standard and curved rails
The viewing angle can be set upon installation. Cables are routed internally through the clamp and onto the rail
|
145.49 |
|
|
Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" Rails
Features:
Applications: Designed for (1) Standard Instrument
Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments
The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you
Rail Mounted
Universal Fixing
Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33")
Fit your display onto standard and curved rails
Great Viewing Options Viewing angle can be set upon installation
Cables are routed internally through the clamp and onto the rail
Increased Protection
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time
Supplied pre-cut with a 91mm diameter hole to accept all major brands of standard sized instrument heads
|
143.58 |
|
|
Rail Mounting Kit f/RescYou Line
Rail Mounting kit for VIKING RescYou Stainless steel cradle.
VIKING RescYou stainless steel Rail Mounting kit allows the RescYou GRP container to be mounted vertically on the rail.
|
252.00 |
|
|
ShadeFin Mini Round Tube Rail Mount
The ShadeFin Mini Round Rail Mount can be used on round rails from 7/8" to 1" outside diameter. The round rail mount's secure design can be mounted either vertically or horizontally, depending on preference.
Features and Benefits:
Includes mounting hardware
Includes inserts for 7/8" and 1" OD rails
Constructed out of aluminum-grade 6061 alloys with stainless steel Type-304 screws
Includes an injection-molded nylon cap
3-year limited warranty
Specifications:
Finish: Powder coated, misty silver
Minimum Outer Diameter (inch): 7/8”
Maximum Outer Diameter (inch): 1-1/4”
|
83.02 |
|
|
ShadeFin Mini Square Tube Rail Mount
The ShadeFin Mini Square Rail Mount can be used on square rails from 1" to 1-1/2" outside diameter. The square rail mount's secure design can be mounted either vertically or horizontally, depending on preference.
Features and Benefits:
Includes mounting hardware
Constructed out of aluminum-grade 6061 alloys with stainless steel Type-304 screws
Includes an injection-molded nylon cap
3-year limited warranty
Specifications:
Finish: Powder coated, misty silver
|
61.42 |
|
|
7/8"-1-1/4" SS Rail Mount Pulpit Staff
Features:
T304 stainless steel
Mounts to 7/8" to 1-1/4" rails
Complete with split rings
Round rails only
15" Long with nylon rail clamp
Flag NOT INCLUDED
|
23.78 |
|
|
316 Stainless Steel Antenna Rail Mount - 1" - 1-1/4" Rails
The Seaview 316 S.S. Rail Mount is designed to fit 1", 1-1/8” and 1-¼” rails and is for mounting GPS, weather, or VHF antennas. The unique two-piece design clamps to a rail and keeps wiring completely hidden inside the mount and railing. The 1"-14 threads accept the most common GPS or VHF antennas. Cast of solid 316 stainless steel with rubber bushings.
|
72.00 |
|
|
RAM 1.5" Rail Mount with Double U-Bolt Base & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)
The RAM-334-1U consists of a double socket arm, 3.625" square base with the VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 0.75" to 1" in diameter. The VESA base contains a 75mm X 75mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
U-Bolt Dimensions:
Accommodates rails from 0.75" to 1" in diameter.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
62.56 |
|
|
Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - White
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: White
|
9.88 |
|