Simrad Power Cable f/NSE NSS & StructureScan 3D, GO7, GO9, GO12 4 pin conn. to 4 bare wires for power in - power control bus and external alarm - 6.5 ft (2 m).

SimNet Power Cable 2M with Terminator 2 Meter SimNet Power Cable with Terminator

SimNet Cable 2M SimNet (Simrad Intelligent Marine Network) is a unique marine electronics network system. Over the last 5 years, it has proven to be one of the most reliable and easy to use networks in the marine industry. SimNet is easy to install with thin cables and small plugs.

StructureScan® 3D SideScan Imaging for HDS Gen3, NSS evo2 & N SO evo2 Powered by multi-beam sonar technology, StructureScan 3D produces images of underwater terrain and targets in stunning, high-resolution, 180°, 3-dimensional views. StructureScan 3D sidescan imaging reveals underwater terrain and fish-holding structure to create a super-wide, 180°, 3-dimensional view beneath your boat. The exclusive 3-dimensional views can only be displayed on the Lowrance HDS Gen3 fishfinder/chartplotters, Simrad NSS evo2 and NSO evo2 navigational systems. This unique, true-to-life view is attained with a single SKU that includes a SideScan 3D Skimmer® transducer and StructureScan® 3D module. Features: Easy-to-Understand Sonar Images-Leading Edge™ scanning reference provides clear graphical illustration of sonar beams ScanTrack™ allows viewing of 3D images from any angle with pan-tilt-rotate control Increased SideScan Range and Unrivaled Clarity-Scan up to 600 feet to each side of the boat with incredibly detailed, high-definition views Easily understand where fish and fish-holding structure are located Easily identify vertical drops and crucial depth changes Use 3D Waypoint Overlay makes it easy to revisit fishing areas, structure, and other underwater features SelectScan™ Target Identification-Automatically shades fishholding cover and suspended targets in a contrasting color, making target identification quicker and easier than ever before StructureScan 3D Advantages: 3-Dimensional Views, Improved DownScan Imaging™ & StructureScan® HD Contours below the water's surface are shown - up to 600 feet port and starboard - with incredibly detailed, high-definition views. StructureScan® 3D provides multiple views, including 2-dimensional DownScan Imaging™ and StructureScan® HD, and the realistic 3-dimensional views. Clearest Possible SideScan Views The StructureScan 3D transducer design has been enhanced with an increased number of sensors for greater imaging performance. Complete Control Of Underwater Views Using preset virtual point-of-view angles or ScanTrack™ pan-tilt-rotate control mode, you can adjust the view and perspective beneath your boat. Combine custom HD and 3D views to increase your understanding of how fish relate to cover and to search fishing areas more effectively. The Leading Edge™ Scanning Reference Instantly Shows Coverage Area Leading Edge provides a graphical illustration of sonar beams as they intersect with bottom contours. The most recently scanned area is represented by red fan-shaped markers directly under the boat. Leading Edge also includes a depth scale that shows greater depth detail as you zoom in, giving you a better sense of target depth. SelectScan™ Target Identification Makes Fish Detection Easier Automatically shades fish-holding cover and suspended targets in a color that contrasts the selected color palette, making target identification quicker and easier than ever before. Vertical Enhancement Makes Even The Slightest Depth Changes More Visible This feature is a user-selectable scale that applies onscreen emphasis to vertical drops and crucial depth contour changes, making them easier to identify relative to the surrounding underwater terrain. 3D Waypoint Overlay Creates A Virtual Buoy Marker Revisiting fishing areas, structure and other underwater features is easy with the Waypoint Overlay feature. Use the waypoint keypad to save a waypoint at the boat location, or switch to cursor mode, and save a waypoint over specific targets, baitfish or cover. Extra Ethernet Expansion The StructureScan 3D module supports connectivity For up to 3 networked devices.

StructreScan® 3D Module - No Ducer Powered by multi-beam sonar technology, StructureScan 3D produces images of underwater terrain and targets in stunning, high-resolution, 180°, 3-dimensional views. StructureScan 3D sidescan imaging reveals underwater terrain and fish-holding structure to create a super-wide, 180°, 3-dimensional view beneath your boat. The exclusive 3-dimensional views can only be displayed on the Lowrance HDS Gen3 fishfinder/chartplotters, Simrad NSS evo2 and NSO evo2 navigational systems. Features: Easy-to-Understand Sonar Images-Leading Edge™ scanning reference provides clear graphical illustration of sonar beams ScanTrack™ allows viewing of 3D images from any angle with pan-tilt-rotate control Increased SideScan Range and Unrivaled Clarity-Scan up to 600 feet to each side of the boat with incredibly detailed, high-definition views Easily understand where fish and fish-holding structure are located Easily identify vertical drops and crucial depth changes Use 3D Waypoint Overlay makes it easy to revisit fishing areas, structure, and other underwater features SelectScan™ Target Identification-Automatically shades fishholding cover and suspended targets in a contrasting color, making target identification quicker and easier than ever before StructureScan 3D Advantages: 3-Dimensional Views, Improved DownScan Imaging™ & StructureScan® HD Contours below the water's surface are shown - up to 600 feet port and starboard - with incredibly detailed, high-definition views. StructureScan® 3D provides multiple views, including 2-dimensional DownScan Imaging™ and StructureScan® HD, and the realistic 3-dimensional views. Clearest Possible SideScan Views The StructureScan 3D transducer design has been enhanced with an increased number of sensors for greater imaging performance. Complete Control Of Underwater Views Using preset virtual point-of-view angles or ScanTrack™ pan-tilt-rotate control mode, you can adjust the view and perspective beneath your boat. Combine custom HD and 3D views to increase your understanding of how fish relate to cover and to search fishing areas more effectively. The Leading Edge™ Scanning Reference Instantly Shows Coverage Area Leading Edge provides a graphical illustration of sonar beams as they intersect with bottom contours. The most recently scanned area is represented by red fan-shaped markers directly under the boat. Leading Edge also includes a depth scale that shows greater depth detail as you zoom in, giving you a better sense of target depth. SelectScan™ Target Identification Makes Fish Detection Easier Automatically shades fish-holding cover and suspended targets in a color that contrasts the selected color palette, making target identification quicker and easier than ever before. Vertical Enhancement Makes Even The Slightest Depth Changes More Visible This feature is a user-selectable scale that applies onscreen emphasis to vertical drops and crucial depth contour changes, making them easier to identify relative to the surrounding underwater terrain. 3D Waypoint Overlay Creates A Virtual Buoy Marker Revisiting fishing areas, structure and other underwater features is easy with the Waypoint Overlay feature. Use the waypoint keypad to save a waypoint at the boat location, or switch to cursor mode, and save a waypoint over specific targets, baitfish or cover. Extra Ethernet Expansion The StructureScan 3D module supports connectivity For up to 3 networked devices.

StructureScan 3D® Stainless Steel Thru-Hull Transducer - Single Lowrance and Simrad Yachting announce the release of new thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution. As with transom-mount StructureScan 3D® transducers, the thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right coverage. These Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ & 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speeds; and feature a 30'(9M) transducer cable. For boats with steep or variable deadrise hull angles, consumers must purchase the StructureScan® 3D Stainless Steel Thru-Hull Pair (000-13560-001).

StructureScan 3D® Stainless Steel Thru-Hull Transducer - Pair The Dual thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution. These transducers are designed for boats with steep or variable deadrise hull angles, for seamless display of SideScan and DownScan and 3D Imaging. As with transom-mount StructureScan 3D® transducer, the Dual thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination, plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right of coverage. These Dual thru-hull Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Dual thru-hull Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan, DownScan Imaging™ and 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speed; and feature a 30'(9M) transducer cable. **Note if you require a longer cable you will need 2 each 000-12752-001 transducer extension cable**

StructureScan 3D Thru Hull with L/H Chirp and StructureScan 3D StructureScan 3D thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block. StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.

StructureScan 3D® Thru-Hull Transducer with Medium/High CHIRP StructureScan 3D thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block. StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.

NAC-1 Autopilot Computer The NAC-1 is the centre of your autopilot system, containing the electronics needed to operate and interface with other key components. It has been designed for hydraulic or cable-steered boats up to nine metres (30 feet) in length, and works with Simrad displays to provide a fully integrated autopilot solution.  Easy Installation Plug-and-play connectors facilitate easy installation, minimising the wiring necessary to install your autopilot system. Industry-standard NMEA 2000® networking offers simple connectivity to heading sensors, rudder feedback units, and multifunction displays located anywhere on board. Hydraulic & Cable Steer Options The NAC-1 Autopilot Computer is recommended for boats up to 9 metres (30 feet) in length. It been designed to reliably drive either the Simrad PUMP-1 reversible hydraulic pump for hydraulic-steered outboards, or the HELM-1 drive unit for cable-steered vessels. Virtual Rudder Feedback Simrad Virtual Rudder Feedback technology eliminates the need to install a separate rudder feedback unit aboard outboard and sterndrive (inboard/outboard) boats with planing hulls. This reduces overall autopilot system cost and complexity, and is ideal where a feedback unit is impractical due to mechanical constraints. Minimum Product Requirements: A drive unit, heading sensor, NMEA 2000® network, and compatible autopilot controller or multifunction display are required to create a complete autopilot system. Some vessels may also require a rudder feedback unit. Features: Reliable autopilot performance based on Continuum Steering technology Recommended for boats up to 9 metres (30 feet) in length Compatible with the Simrad PUMP-1 reversible hydraulic pump and HELM-1 cable steer drive unit Virtual rudder feedback for simplified installation aboard outboard and sterndrive boats Supports Simrad RF25 rudder feedback units Plug-and-play connectors for easy installation NMEA 2000® connectivity to heading sensors, rudder feedbacks, and multifunction displays What's in the box? NAC-1 Power Cable NAC-1/NAC-2 DRIVE CABLE - 2M NAC-1/NAC-2 Power Cable - 2m

Dual Transducer Extension 10' Cable - 12-Pin - for StructureScan 3D Dual 10' - 12-Pin Transducer Cables

TotalScan/StructureScan 3D Replacement Bracket Replacement bracket for TotalScan & StructureScan 3D Transom Mount Transducers Hardware included

Flat Mount Bracket f/StructureScan 3D Ducer & TotalScan Ducer 3D Transducer Flush Mount Bracket is used to flush mount the transducer under the boats Hull. Suits TotalScan and 3D Transom Transducers

StructureScan 3D Thru-Hull Transducer Fairing Block Only Navico's high-performance fairing block gives you greater StructureScan performance at speed.

Transom Mount Transducer for StructureScan 3D Includes transducer, transom mounting bracket and assembly and mounting screws, washers and nuts.