HTM-1 Fender 6.3" x 15.5" - Black with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-1 Fender 6.3" x 15.5" - Blue with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-1 Fender 6.3" x 15.5" - White with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-1 Fender 6.3" x 15.5" - Black In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb *Sold as an Individual

HTM-1 Fender 6.3" x 15.5" - Graphite In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb *Sold as an Individual

HTM-1 Fender 6.3" x 15.5" - Blue In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb *Sold as an Individual

HTM-1 Fender 6.3" x 15.5" - White In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb *Sold as an Individual

HTM-2 Fender 8.5" x 20.5" - Black with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit

G-2 Twin Eye Fender 4.5" x 15.5" - Sand with Adapter Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 4.5" x 15.5" (11.4 x 39.4cm) Eye Diameter - .5" (1.3cm) Circumference - 14.1" (35.9cm) Volume - .7 gallons (2.6L) Boat Size - 10' - 15' (3 - 4.6M) Weight - 1.4lbs In the Box: Fender Inflation Adapter  *Sold as a Kit

G-5 Twin Eye Fender 8.8" x 26.8" - Black with Adapter Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-4 Fender 13.5" x 34.8" - Black w/Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  42.4" (107.8cm) Volume -  15.6 gallons (59.1L) Boat Size - 40' - 50' (12.2 - 15.2M) Weight - 10.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit

F-11 Twin Eye Fender 21.2" x 57.5" - Black Polyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.   The F Series fender has offered protection to the world's finest yachts and fishing vessels.  Why?  Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice!  Classic European twin-eye style boat fenders for the most discerning eye. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 21.2" x 57.5" (53.8 x 146.1cm) Eye Diameter - 1.1" (2.8cm) Circumference - 66.6" (169.2cm) Volume - 63.7 gallons (241.1L) Boat Size - 60' and greater (18.3M and greater) Weight - 25.5lbs *Sold as an Individual

G-2 Twin Eye Fender 4.5" x 15.5" - Black Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 4.5" x 15.5" (11.4 x 39.4cm) Eye Diameter - .5" (1.3cm) Circumference - 14.1" (35.9cm) Volume - .7 gallons (2.6L) Boat Size - 10' - 15' (3 - 4.6M) Weight - 1.4lbs *Sold as an Individual

HTM-2 Fender 8.5" x 20.5" - Blue with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-2 Fender 8.5" x 20.5" - White with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit