Airmar B117 200/50kHz Bronze Thru-Hull Transducer - 6 Pin 010-10182-01 Connect our bronze, thru-hull mount transducer to your compatible device to receive depth and temperature data. This transducer has an operating frequency of 200 and 50 kHz; a beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz; and a 0 to 8 degree deadrise. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

T-04MSB Bronze Thru-Hull Temp Sensor - 6-Pin Bronze Thru-Hull Temp Sensor, 8 Meter Cable with 6-Pin Connector.  Specifications: Housing Type: Bronze Install Type: Thru-Hull Features:  Bronze Thru-Hull Temperature Sensor 6-Pin Connector 8-Meter Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials. Features Industry standard for low-profile transducers Depth and temperature Good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz Right angle cable exit offers low headroom and protection when transducer is stepped on Included rubber washer allows tightening of the hull nut to irregular hull surfaces Housings are ABYC H-27 compliant Optional temperature sensor Bronze transducer housing Boat Size: 8M (25') and up Specifications: Weight: Bronze - 0.9 kg (2.0 lb) Hull Deadrise: Up to 8° Acoustic Window: Urethane Hole Diameter: 51mm (2") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 0° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 12° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 20° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW power, 50/200 kHz multiple-ceramics Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Interfaces to any 600W or 1 kW echosounder Bronze transducer housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Bronze Thru-Hull with Temperature 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Transducer w/ Temp, 600w (8-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Bronze Thru-Hull with Temperature 30 Foot Cable with 8-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 46/10 degree Beam Angles Bronze Thru-Hull 8-Meter Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12º The bronze B60-12º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5mm (3/16") extending outside of the hull. Features: Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Arrow on cap points toward keel when installed Built-in temperature sensor Boat Size: Up to 8M (25') Bronze transducer housing Specifications: Weight: 1.4 kg (3 lb) Hull Deadrise: Up to 24° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20º The bronze B60-20º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. Features: Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Arrow on cap points toward keel when installed Built-in temperature sensor Boat Size: Up to 8 m (25') Bronze transducer housing Specifications: Weight: 1.4 kg (3 lb) Hull Deadrise: Up to 24° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin  Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow. The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer. Features: Fixed 20° tilted version for 16° to 24° hull deadrise 12 Pin Connector for Garmin FishFinders Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing, or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology Specifications: Brand: Airmar Technology Acoustic Window: Urethane Cable-Length: 9 m (30'), 10 m (33') Common Use: Fishing Connector: Garmin 12-Pin Country of Origin: USA Display Connector: 12G Functions: Depth, Temperature Hole Size: 95 mm (3-3/4") Hull Material: Fiberglass or wood Material: Bronze Max Deadrise Angle: 24° Max Depth: 400 m (1300') Max Vessel LOA: Up to 11 m (36') Medium Frequency: 60-100 kHz Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a Mounting Style: Tilted Element Thru-Hull Power Rating: 1 kW Single or Dual Frequency: Single Tilt Angle: 20° Tilted Element: Yes Water Temperature: -10° to 40°C (14° to 104°F) Weight: 2.7 kg (6 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.