|
Evinrude Engine Interface Cable - Red
Interface between an Evinrude engine and NMEA network to display engine data. Comes with a T connector. For use with red NMEA network
Works with: NMEA 2000 compliant units
|
100.13 |
|
|
Yamaha Engine Interface Cable
Yamaha engine interface cable 4.5 m (15 ft) and T-connector
Connects to Yamaha engines without Yamaha CommandLink Plus system.
2006 & newer: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250.
2006 & newer: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300.
Outputs:
Yamaha 4-Stroke 50-250 | 2-Stroke HDPI 150-350
RPM
Alternator
Voltage
Engine Hours
Engine Temperature
Fuel Pressure
Fuel Rate
Oil Pressure
Trim*
Water Pressure
*Digital trim must be connected by a Yamaha dealer.
*Requires NMEA 2000 network. Kit includes T-connector to connect to a new or existing NMEA 2000 network. Add NMEA 2000 starter kit, part number 000-0124-69, if a network is not already installed.
Works with: NMEA 2000 Compliant Units
|
96.71 |
|
|
Lowrance Outboard Cable-Steer Pilot Pack
Everything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course.
When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading.
The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes - so you can retrace a previous track and get your boat back to the dock from your fishing area.
HDS Units require 3.5 Software
Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 or Gen2 Touch display
Lowrance SmartSteer™ interface provides control of your cable-steered outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor
"One-touch" route creation from trails
Pre-set turn patterns for more effective fishing/trolling presentations
Recommended for single-outboard setups, on boats that are 30 feet and less, in length
VRF (Virtual Rudder Feedback).simplifies pilot installation eliminating the need for a rudder position sensor
Easy setup.straightforward guide steps you through first-time install
Easy-to-install, plug-and-socket connection with no complex terminal wiring
Supported by Lowrance Advantage Service program
Dash-mount button for one-touch Auto/Standby activation
Steer to Heading, Course or Route
High efficiency, super-quiet 0.8L hydraulic gear pump
Lowrance Outboard Pilot Cable-Steer Pack replaces the manual helm-drive unit
Morse 290, Morse 304411 and Teleflex SSC52 cable compatibility
Helm-1 is only compatible with the NAC-1.Helm-1 includes variable-voltage feedback interface
2 Year Limited Warranty
Package Includes:
NAC-1 Autopilot Computer - 000-11769-001
The brains behind the Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor and clutch.
Helm-1 for Outboard Pilot - 000-11771-001
This drive unit replaces your manual helm-drive unit on single cable installations. Compatible with Morse 290, 304411 and Teleflex SSC52 cables. Includes voltage rudder-feedback sensor, and is only compatible with NAC-1.
N2K 4 Way - 000-10996-001
NMEA2000 4-way joiner. Connect four NMEA2000 Micro-C devices to the NMEA2000 Network.
N2KEXT-2RD - 000-0119-88
0.6M (2') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device
N2KEXT-6RD - 000-0127-53
1.82M (6') NMEA 2000® cable for backbone extension or drop cable to connect an additional network device
N2KEXT-15RD - 000-0119-86
4.55M (15') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device
TR-120-KIT - 000-0127-52
Set of 1 male and 1 female NMEA 2000® terminators
MICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001
|
1738.80 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 6'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
41.18 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 10'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
45.60 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 12'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
47.81 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 14'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
50.03 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 16'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
52.24 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 18'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
54.44 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 22'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
58.88 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 26'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
63.30 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 28'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
65.52 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 30'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
67.73 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 32'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
81.01 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 34'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
91.36 |
|