|
MP Pumps 34036 MOTOR 12VDC 3200RPM
Motor Only
This motor also comes with a pump as sku MP 34141
|
280.80 |
|
|
MP Pumps 34293 MOTOR 24VDC 3000RPM 316SS
MP Pumps FRX 75
SUCTION AND DISCHARGE 3/4" NPT x 3/4" NPT
APPLICATION Agricultural, Commercial, Industrial, Marine, OEM, Transportation
MATERIALS OF CONSTRUCTION 316 stainless steel
FLOW Up to 28 GPM
HEAD FEET Up to 32'
IMPELLER 316 Stainless steel, Semi-Open (Sintered PM)
DRIVE Close coupled 24V DC
SEAL Standard seal is carbon
|
261.04 |
|
|
MP Pump 39467, Flomax 100 Series Self-Priming Centrifugal, 1" X 1" Connections
The FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A carbon / ceramic / viton mechanical seal is standard. With a maximum flow of over 55 GPM and pressure capabilities of nearly 60 feet, this rugged self-priming pump is capable of 17 feet suction lift when operating at 3450 RPM.
The FMX100 has numerous applications in industries such as: construction, petroleum, diesel exhaust fluid, marine and marine air conditioning, agriculture for biocides and liquid fertilizers, and numerous industrial applications such as brine and calcium chloride. 316SS Self Prime Pump for chemicals, salt water or many other liquids where corrosion is a problem. Marine Boat air conditioning is a big market for these pumps. Model FRX 75-SP is a high performance self-priming 316 stainless steel centrifugal pump.
The O-ring / flapper design enhances the self-priming capability to 12 foot suction lift. Marine ignition protected motors available. 316 Stainless Steel (Investment Cast). 1/8" NPT Fill Port.
Originally designed for marine air conditioning installations when the pump mounting location is prone to air-lock or requires a suction lift. Even when a pump is mounted below the waterline an air-lock can occur due to hull motion when the vessel is underway. Pump will purge air from the system and eliminate “Air-Lock; from becoming an irritating issue.;
1" x 1" Self Priming Centrifugal Pump
APPLICATION: Agricultural, Commercial, Industrial, Marine
MATERIALS OF CONSTRUCTION: 316 stainless steel
FLOW: Up to 55 GPM
HEAD FEET: 60'
IMPELLER: 4.0"
DRIVE OPTIONS: Close Coupled 1 HP TEFC IEC80B34 Motor, Close coupled 3/4HP TEFC IEC80B34 Motor, Engine Mount for 5/8" Shaft, Pedestal Hydraulic
SEAL: Type 6A carbon/ceramic/viton
DISCHARGE: 1"
SUCTION: 1"
|
1337.40 |
|
|
MP Pumps 31925 CHEMFL 8 PEO 213/15TC 316SS
|
3979.58 |
|
|
MP Pumps FloMax FMX 100 1" x 1" Close Coupled 3/4HP Motor Single Phase 39529
The patented 1” x 1” FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A type 6A carbon / ceramic / viton mechanical seal is standard. With a maximum flow of over 55 GPM and pressure capabilities of nearly 60 feet, this rugged self-priming pump is capable of 17 feet suction lift when operating at 3450 RPM.
The FMX 100 has numerous applications in industries such as: construction, petroleum, diesel exhaust fluid, marine and marine air conditioning, agriculture for biocides and liquid fertilizers, and numerous industrial applications such as brine and calcium chloride.
Discharge 1"
Suction 1"
Materials of Construction 316 stainless steel
Flow Up to 55 GPM
Head Feet 60'
Impeller 4.0"
Drive Options Close Coupled 1 HP TEFC IEC80B34 Motor
Close coupled 3/4HP TEFC IEC80B34 Motor
Engine Mount for 3/4" Shaft
Pedestal Mount 3/4" Shaft
Seal Type 6A carbon/ceramic/viton
|
1337.40 |
|
|
MP Pump 34141 316 Stainless 12V DC 3/4" NPT Pump
Made of 316 cast stainless steel, it is more robust and reliable than the competition, extending life cycles up to 7,000 hours. The 12 to 24-volt pump features a 3/4" NPT connections, and a totally enclosed motor with ball bearings as opposed to the typical sleeve bearings. The enclosed motor is ISO 8846 certified for Marine Ignition Protected.
Specifications
Construction: Stainless steel (investment cast) housing, cover and impeller, with viton O-rings, 316 stainless steel impeller semi open.
Usage: The Lil' Squirt is perfect for transfer of chemicals, potable water used in live wells, bait tanks, general washdown and old fashion fun on the dock or out on a sand bar around other boats.
Life Cycle: up to 7,000 hours Mechanical Seal: carbon/ceramic/viton Motor: 12 Volts DC Motor Suction & Discharge Connections: 3/4" NPT, Horizontal Discharge
|
559.69 |
|
|
MP Pump 29918 Chemflo 4 Pumpak SS: 4.5
MP Pumps 29918, CHEMFLO 4 End Suction Centrifugal Pump End Only, 316 Stainless Steel, 2" x 1-1/2" NPT Ports, Capacity up to 180 GPM, Total Head up to 78 ft. CF4PPK SS: 4.5 T-2100
Rated Capacity: 120 GPM Maximum Head: 46 feet Suction & Discharge Connections: 2" X 1-1/2" FNPT Impeller Diameter: 4.50" impeller diameter. Construction: Investment-Cast, 316 Stainless Steel, enclosed impeller
316 stainless steel shaft; viton mechanical seal. Motor Required: 3 HP Motor Frame Required: 56C Weight: 15 lbs
|
1409.40 |
|
|
MP Pump 28398 Flomax 8 Pumpak SS: Ccmtr7/8
Specifications
Rated Capacity 140 GPM
Maximum Head: 92 feet (40 PSI)
Suction & Discharge Connections: 2" X 2" FNPT
Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer.
Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft for 7/8" driver shaft; viton mechanical seal.
Motors: Pump water end only less motors
Motors Required: 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz
Motor Frames Required: Fit 184C/145TC NEMA motors with feet
Weight: 49 lbs.
Pump Capacity - MP Pumps Flomax 8 Self Priming Pumps At 0 Suction Lift, 3600 RPM
Required
Motor
HPRequired
Impeller
TrimCapacity At Total Dynamic Head In FeetShut
Off
20'30'40'50'60'70'80'90'
Gallons Per Minute (GPM)
1-1/24.10"105856020----54'
24.62"12711090704515--74'
35.0"1501401201008060401596'
|
2941.13 |
|
|
MP Pump 28397 Flomax 8 Pumpak SS: Ccmtr5/8
Rated Capacity 140 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit 5/8" driver shaft; viton mechanical seal. Motors: Pump water end only less motors Motors Required: 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required: 56C NEMA motors less feet. Weight: 53 lbs.
Pump Capacity - MP Pumps Flomax 8 Self Priming Pumps At 0 Suction Lift, 3600 RPM
Required
Motor
HPRequired
Impeller
TrimCapacity At Total Dynamic Head In FeetShut
Off
20'30'40'50'60'70'80'90'
Gallons Per Minute (GPM)
1-1/24.10"105856020----54'
24.62"12711090704515--74'
35.0"1501401201008060401596'
|
2960.96 |
|
|
Aurora - LED Dome Light - Polished Stainless Steel Finish - White Dimming
Customers told us they wanted a high quality LED replacement for the ubiquitous dome light. It had to be bright, with wide even light. They wanted a clean look, an intuitive and reliable switch, and a notable level of quality. We delivered, and then added IP67 immersion protection. We then raised the bar with multiple color output options and dimming. Lumitec's Aurora Dome Light stands apart.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 290mA
24V DC Amps: 160mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White):180
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 4.00 (10.16cm)
Height: 4.00" (10.16cm)
Depth: 0.73" (1.84cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
97.98 |
|
|
Groco 24V-J Motor 24V Psr Series
|
2883.11 |
|
|
Groco 24V-Jc Motor 24V W/Control
|
3979.69 |
|
|
March BC-2CP-MD 24V DC BRUSH Part# 0125-0123-0200
|
453.38 |
|
|
March BC-2CP-MD 24V DC BRSHLS Part# 0125-0123-0400
|
743.44 |
|
|
Gianneschi CP26-A1-24V Brz 24V Self Prim Pump
CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 1500 RPM, 24 Volts DC. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Applications:
Ballast
Bilge
Diesel oil
F.W./S.W. Circulation
Fire-fighting
Grey water
S.W feeding
Port Size:
From 3/4'' to 1'' 1/2 BSP
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
1603.31 |
|