|
4 Blade aluminum propeller for BRP 9.9-15 horsepower and Suzuki 8-20 horsepower engines with 10 tooth spline and thru hub exhaust. 2-1/2" gear case, Japan origin.
|
89.99 |
|
|
4 Blade aluminum propeller for BRP 9.9-15 horsepower and Suzuki 8-20 horsepower engines with 10 tooth spline and thru hub exhaust. 2-1/2" gear case, Japan origin.
|
89.99 |
|
|
PODW-7-UC
Compatible With:
Garmin:620, 640
Raymarine: e7, e7D
Seaview Power Pods are the ideal solution to mount your chart plotters, radar displays and standard navigation instruments. Say no more to having to find a level surface to mount your Power Pod. It's unique mounting design and extreme adjustability allows it to be mounted on any surface.
The Power Pod has a fully adjustable 4" mounting base for better view. The Pod can tilt back, tilt forward, or side-to-side for maximum visibility. Uncut Pod box with single chartplotter 10" x 7" usable face and 2 instruments 4.72" x 4.72" usable face.
Features:
Accommodates nearly all brands of marine electronics
Supplied uncut for your convenience
White base
Single chartplotter 10" x 7" usable face and 2 instruments 4.72" x 4.72" usable face
Can be mounted vertical or up-side down
GORE protective vent for proper ventilation
Water tight gasket
UV resistant ABS plastic housing
Marine grade primed and powder coated aluminum base
Polished stainless steel quick release handles for full horizontal & vertical adjustability
|
525.00 |
|
|
Major Rebuild Kit for Johnson 10-24074-7
This kit contains the following items
JS 0.0279.300
6
SCREW M4X8
JS 0.0370.012
1
RETNG RING SS 11535-01273
JS 0.0371.028
1
RETAINING RING 1.136 STEEL
JS 0.2173.432
1
O'RING
JS 0.2233.010
1
LIP SEAL
JS 0.3431.748
2
BALL BEARING
JS 01-42389
1
CAM 1/1 F4B
JS 01-42391
1
GASKET
JS 01-42398
1
ENDCOVER
JS 01-45049
1
WASHER
JS 01-45050
1
WASHER
JS 01-45659
1
WASHER
JS 01-46790-01
1
WASHER
JS 01-46794-04
1
ENDCOVER SCREW
JS 09-810B-1
1
IMPELLER NEOPRENE
MS DATA SHEET
1
DATA SHEET
Kits are put together at time of order
|
214.55 |
|
|
Minor Repair Kit for Johnson 10-24074-7
This kit contains the following items
JS 0.2233.010
1
LIP SEAL
JS 09-810B-1
1
IMPELLER NEOPRENE
Kits are put together at time of order
|
50.53 |
|
|
4 Blade high thrust aluminum propeller for Yamaha 8 horsepower engines. Ideal for kicker/auxillary engines with heavy loads. 7 tooth spline and thru hub exhaust.
|
89.99 |
|
|
3 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case. Suggested for 135-150HP motors for heavy boats.
|
509.99 |
|
|
3 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case. Suggested for 135-150HP motors for heavy boats.
|
509.99 |
|
|
PED4900 PedestalPod Uncut (Usable Face = 12.5"W x 7.8"H) (31.75cm W x 19.8cm H) - Carbon Black
PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft.
PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.
There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.
|
410.17 |
|
|
PED5100 PedestalPod Uncut (Usable Face = 14"W x 7.625") (35.5cm W x 19.4cm H) - Carbon Black
PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft.
PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.
There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.
|
410.17 |
|
|
3 Blade aluminum propeller for 6-9.9 horsepower engines with 7 tooth spline and thru hub exhaust.
|
62.99 |
|
|
3/4" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix
Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.
Features:
Flexible, but the 147 series is less flexible than the 149 series of hoses
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Clear vinyl reinforced with black helix
Color: Clear with black helix
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-49°C)
Boxed: 50ft. / (15.24m)
Inner Diameter: (inch) 3/4" / (mm) 19
Outer Diameter: (inch) 0.968" / (mm) 24.6
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 11 / (Kg/m) 0.33
Bend Radius: (inch) 2.25" / (mm) 57.2
*Burst Pressure is 4 x Working Pressure
|
88.32 |
|
|
1-1/8" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix
Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.
Features:
Flexible, but the 147 series is less flexible than the 149 series of hoses
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Clear vinyl reinforced with black helix
Color: Clear with black helix
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-49°C)
Boxed: 50ft. / (15.24m)
Inner Diameter: (inch) 1-1/8" / (mm) 28.6
Outer Diameter: (inch) 1.39" / (mm) 35.4
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.45
Bend Radius: (inch) 3.5" / (mm) 8.9
*Burst Pressure is 4 x Working Pressure
|
118.87 |
|
|
NMEA Cable, 1 x 7 Pin Connector, 5 Meters
Replaces Furuno Part # 000-144-418
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
120.00 |
|
|
BP-2 Poly Basket - 1.9" x 7.2"
Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter.
Fits:
ARG-750
SA-750
|
42.00 |
|