Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim

3 Blade aluminum propeller for Honda 75-130 horsepower engines and Nissan/Tohatsu 60-90 horsepower engines. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.

1/2" x 15' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 1/2"  Rope Length: 15' Tensile Strength: 13,100 lb *Sold as an Individual

1/2" x 25' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 1/2"  Rope Length: 25' Tensile Strength: 13,100 lb *Sold as an Individual

1/2" x 35' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 1/2"  Rope Length: 35' Tensile Strength: 13,100 lb *Sold as an Individual

3 Blade stainless propeller for 60 -140 horsepower engines with 13 tooth spline and thru hub exhaust. 4-1/4" Gear Case.

ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8" ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight. They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate. Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. An aluminum counter flange and a mosquito screen are available for these hatches. Features: External Dimensions -  13 1/8" x 13 1/8" Cut Out Dimensions - 10 1/4" x 10 1/4"  Number of Handles - 1 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

13-1/8" x 10" Electric Seat Slide Perfect for seats 23" to 28" wide, this 13-1/8" X 10" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions.  Features: Ideal for seats 23" to 28" Features 5" of travel distance (stroke length) Water-resistant IP66 rating Meets H31 testing standards for seat applications Precision-machined 6000-series aluminum chassis Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight and shock resistant  Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications Quite an operation ≤ 58dB Electric actuator Self-locking at any given position (at rated loads) No racking in any direction due to precision tolerances in the track/glide system All electric seat slides and components are acid-etched clear anodized Made in the USA  3-year limited warranty Specifications: 12V DC 9 AMP Max current Max load 3500N Push and pull force of 1500N IP66 Rated  Speed 13.5 mm/Sec @ 1500N

13-1/8" x 24" Electric Seat Slide Perfect for seats and benches 29" to 40" wide, this 13-1/8" X 24" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions. Contact your TACO Sales or Customer Service Representative for more information. Features: Ideal for seats 29" to 40" Features 5" of travel distance (stroke length) Water-resistant IP66 rating Meets H31 testing standards for seat applications Precision-machined 6000-series aluminum chassis Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight, and shock resistant  Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications Quite an operation ≤ 58dB Electric actuator Self-locking at any given position (at rated loads) No racking in any direction due to precision tolerances in the track/glide system All electric seat slides and components are acid-etched clear anodized Made in the USA  3-year limited warranty Specifications: 12V DC 9 AMP Max current Max load 3500N Push and pull force of 1500N IP66 Rated  Speed 13.5 mm/Sec @ 1500N

13-1/8" x 36" Electric Seat Slide Perfect for seats 41" to 54" wide, this 13-1/8" X 36" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions. Contact your TACO Sales or Customer Service Representative for more information. Features: Ideal for seats 41" to 54" Features 5" of travel distance (stroke length) Meets H31 testing standards for seat applications Precision-machined 6000-series aluminum chassis Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight, and shock resistant  Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications Quite an operation ≤ 58dB Electric actuator Self-locking at any given position (at rated loads) No racking in any direction due to precision tolerances in the track/glide system All electric seat slides and components are acid-etched clear anodized Made in the USA  3-year limited warranty Specifications: 12V DC 9 AMP Max current Max load 3500N Push and pull force of 1500N IP66 Rated  Speed 13.5 mm/Sec @ 1500N

3 Blade aluminum propeller for Honda 75-130 horsepower engines and Nissan/Tohatsu 60-90 horsepower engines. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.

Teak Fold Down Luncheon Table - Edson 9-1/2" Guard Pipe with 1", 1-1/8", 1-1/4" Diameter Pipe Edson’s Fold-Down Luncheon Tables are designed to offer a very handy table to fit smaller cockpits and are an ideal cockpit cocktail table. Measuring 13-1/2" x 24" (34.3 x 61 cm) and equipped with fiddle rails on both sides and ends, the Luncheon Table is available in both Teak and White Poly. When not in use, the table folds flat against the guards or can be easily removed from its guard mounted strap by pulling out the hinge pin. Comes complete with all mounting hardware. Edson Teak Tables Solid Teak Construction Easily removable for storage Installs in minutes Non-Magnetic Stainless Hardware No Legs to get in the way! Quick-Release pin for easy removal All Fasteners are Stainless and Bunged Clip holds Table firmly to Pedestal Guard when folded down Natural Teak, ready for the finish of your choice Weight 10.10 lbs **IMPORTANT: If mounting table to an Edson Vision Series NV pedestal with curved front, you must also order the Console Table Bracket Adapter #960-A-3006**

White Poly Fold Down Luncheon Table - Edson 9-1/2" Guard 1" to 1-1/8" Edson’s Fold-Down Luncheon Tables are designed to offer a very handy table to fit smaller cockpits and are an ideal cockpit cocktail table. Measuring 13-1/2" x 24" (34.3 x 61 cm) and equipped with fiddle rails on both sides and ends, the Luncheon Table is available in both Teak and White Poly. When not in use, the table folds flat against the guards or can be easily removed from its guard mounted strap by pulling out the hinge pin. Comes complete with all mounting hardware. Edson Poly Tables Constructed of solid, UV Stable white marine-grade polythylene Non-Magnetic Stainless Hardware Easily removable for storage No Legs to get in the way! All Stainless Fasteners Will not rot, swell or delaminate when exposed to humidity or moisture Scuff and scratch resistant

KingPin™ Standard Hi-Lo 3-Piece Package - 13-1/2" Hi-Lo 3-Piece Set Includes: Standard 11″ KingPin™ post, anodized finish 1610411-A KingPin™ Hi-Lo swivel, e-coat finish (1615201-EC) Standard KingPin™ 7″ x 7″ base, satin Finish (1620001) Rated ABYC Class H-31 B (Fishing Only) 

KingPin™ Threaded Hi-Lo 3-Piece Set - 13-1/2" Features: Threaded KingPin™ 11" Post (1630411-A) KingPin™ Hi-Lo Swivel E-Coat Finish (1615201-EC) Threaded KingPin™ 7" x 7" Base, Stainless Steel with Satin Finish (1630001) Rated ABYC Class H-31 B (Fishing Only)