|
Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame
|
1794.96 |
|
|
3 Blade stainless propeller for 9.9-20 horsepower engines with 14 tooth spline and thru hub exhaust. 2-1/2" gear case, Japan origin.
|
179.99 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 12" - 10-Pack - Black
Package of 10 Black 12"(30.5cm) long sections with a 1/4"(6.4mm) diameter
that shrinks to 5/64"(2mm)
Wire Range: 16-10 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.90 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 12" - 10-Pack - Red
Package of 10 Red 12"(30.5cm) long sections with a 1/4"(6.4mm) diameter
that shrinks to 5/64"(2mm)
Wire Range: 16-10 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.53 |
|
|
3 Blade aluminum propeller for Yamaha 9.9-20 horsepower engines and Honda 8-20 horsepower engines. Both with 8 tooth spline and thru hub exhaust. 2-1/2" Gear Case.
|
69.99 |
|
|
4 Blade aluminum propeller for 8-15 horsepower engines with 13 tooth spline and thru hub exhaust. 2-1/2" gear case. 8HP (4-Stroke) 1996-2005; 9.9, 15HP (2-Stroke) 1974-2005; 9.9, 15HP (4-Stroke) 1995-2001
|
78.99 |
|
|
GP2040-30 SystemPod Pre-Cut for Simrad NSS9 evo/B&G Zeus 9 & 1 Instrument for 12" Wide Guard
NavPod GP2040 Series for 12" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.
|
401.44 |
|
|
GP2040-31 SystemPod Pre-Cut for Simrad GO9/B&G Vulcan 9 & 1 Instrument for 12" Wide Guard
NavPod GP2040 Series for 12" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.
|
401.44 |
|
|
Hypro 1510-0002, Base Plate 9 1/2 X 18
9 1/2" X 18" with 10 gauge steel
See picture (A) for reference
|
130.34 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
3/4" x 12" Threaded Aluminum Pipe
12" length of threaded, bright anodized, 3/4" aluminum pipe for antenna standoff.
Threaded all the way through with 7/8-14 thread so it can be cut to length.
|
15.17 |
|
|
4" x 12" Limited Space Replacement Blade - Standard Finish
4" x 12' Limited Space Replacement Blade - 11 Gauge Standard Finish
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
84.35 |
|
|
4" x 12" Limited Space Replacement Blade - Electro-Polish Finish
4' x 12" Limited Space Replacement Blade - 11 Gauge Electro-Polish Finish
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
97.13 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/8" x 12" - 10-Pack - Black
Package of 10 Black 12"(30.5cm) long sections with a 1/8"(3.2mm) diameter that shrinks to 1/32"(0.8 mm)
Wire Range: <18 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.05 |
|
|
3 Blade aluminum propeller for Yamaha 9.9-20 horsepower engines and Honda 8-20 horsepower engines. Both with 8 tooth spline and thru hub exhaust. 2-1/2" Gear Case.
|
69.99 |
|