|
3 Blade aluminum propeller for Mercruiser Bravo II, 4.3L -7.4L and D2.8L - D7.3L. 19 Tooth spline and thru hub exhaust.
|
419.99 |
|
|
6.5" x 11" Weatherproof PA Speaker
Frequency Response: 200Hz 15kHz
Max Power: 40W
Sensitivity: 120dB 1W/1M
Impedance: 8 Ohms
Size: 6” Width x 10-7/8” Height x 8-3/8” Depth
Weatherproof ABS construction
|
36.00 |
|
|
Hustler® - Right Hand - Aluminum Propeller - R1-1011 - 3-Blade - 10.5" x 11 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
66.83 |
|
|
Hustler® - Right Hand - Aluminum Propeller - R3-1011 - 3-Blade - 10.5" x 11 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
66.83 |
|
|
Express® Mach3™ - Right Hand - Stainless Steel Propeller - EX1-1011 - 3-Blade - 10.5" x 11 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing stainless steel propellers in the World. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.
The Three Blade Express is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.
Proprietary Stainless Steel, TP17™
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
269.14 |
|
|
Express® Mach3™ - Right Hand - Stainless Steel Propeller - EX3-1011 - 3-Blade - 10.5" x 11 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing stainless steel propellers in the World. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.
The Three Blade Express is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
269.14 |
|
|
3 Blade aluminum propeller for Mercruiser Bravo II stern drive engines with 19 tooth spline and thru hub exhaust.
|
419.99 |
|
|
3 Blade aluminum propeller for Mercruiser Bravo II stern drive engines with 19 tooth spline and thru hub exhaust.
|
419.99 |
|
|
FB250 Inmarsat Fleet Broadband Maritime Terminal with 19" Rack Mount BDU
Intellian FB250 is a maritime terminal designed for Inmarsat’s L-band network ELERA, which enables simultaneous voice and data connectivity up to 284 Kbps. It has been engineered as the perfect companion to the Intellian GX100NX and GX60NX Global Xpress terminals, which together deliver Fleet Xpress.
Simultaneous voice and data - Various applications such as e-mails, SMS, and calls are available by supporting simultaneous voice and data. FB250 also supports 505 emergency calls.
Easy to install and simple configuration - Simple and quick installation via AptusLX, an intuitive web-based platform to manage and control the antenna system. The FB250 comes with a three-year global warranty.
Complete FX solution - Fleet Xpress combines the high data speeds of Global Xpress (Ka-band) with the proven reliability of FleetBroadband (L-band network ELERA) to offer unrivaled speed, continuous connectivity, and guaranteed performance for true global mobility. The FB250 combined with Intellian’s GX100NX or GX60NX is the ideal FX solution.
All-in-one solution - The FB250 offers a variety of features such as analog voice lines, a built-in firewall for data security, four LAN ports with PoE, a 3G/LTE WAN port to connect an external cellular modem, and soft PABX. These technical capabilities and GMDSS readiness of the FB250, make it ideal for vessel operations, safety, and crew welfare services.
Features:
Small and lightweight terminal
Built-in Inmarsat BRM module
Efficient two-axis helix terminal
Unlimited azimuth range
Single cable installation
Ethernet over coax
Technical Specifications:
DC Input - 10.8 - 30 VDC
Power (Max) - 120W
RX Frequency - 1518.0 MHz - 1559.0 MHz
TX Frequency - 1626.5 MHz - 1675.0 MHz
Antenna Connectors - TNC female (ADU) – TNC female (BDU)
Wi-Fi - 802.11 b/g
ADU Dimensions - 291.1 x 294.5 mm / 11.5" x 11.6"
ADU Weight - 4.9 kg / 10.8 lb
BDU Dimensions - 280 x 190 x 41 mm / 11.0″ x 7.5″x 1.45″ 3
BDU Weight - 1.2 kg / 2.6 lb
|
7027.78 |
|
|
ECHOMAP™ UHD2 93sv LiveScope™ Ice Fishing Bundle with ECHOMAP™ UHD2 93sv - LiveScope System
Drill fewer holes and catch more fish with the LiveScope Ice Fishing Bundle. It includes a 9-inch ECHOMAP™ UHD2 combo with an LVS32-IF transducer and swivel pole mount.
Features:
See up to 200’ in any direction with real-time sonar
Use LiveScope™ forward mode so you know where to drill
Use liveScope™ down mode so you can keep an eye on your jig and the fish
Rugged, portable carrying case
LiveScope Forward sonar shows up to 200’ all around you and below the ice, so you can locate schools of fish and know where to drill the next hole
LiveScope Down sonar shows live sonar images of what is below the ice, so you can watch fish respond to your jig
ECHOMAP UHD2 Combo
Revolutionary real-time sonar pairs with a large 9-inch ECHOMAP UHD2 combo touchscreen display with a keyed assist, allowing you to see up to 200’ in any direction.
Two Modes One Transducer
LiveScope System offers two live-scanning sonar modes — Down and Forward. It features a transducer cable that stays flexible, even in freezing conditions
Garmin Navionics+ Maps
You get preloaded Garmin Navionics+ maps for exceptional detail on more than 23,000 U.S. lakes.
Custom Combos
You can create custom pages that combine sonar, flashers, and maps on your display.
Carrying Case
Where you take your bundle is up to you. But the rugged, glove-friendly portable carrying case lets you easily transport it from hole to hole and season to season.
In the Box:
ECHOMAP™ UHD2 chartplotter (version depends on mapping selected)
LVS32-IF transducer
GLS™ 10 sonar module
Ice fishing pole mount
Tilt mount
Power cable
Portable fishing bag with handle
Rechargeable battery
Battery charger
Documentation
General Specifications:
Dimensions: 13.8 x 12.2 x 13.0 in. / 35 x 31 x 33 cm
Touchscreen: Yes
Input: Touchscreen with Keyed Assist
Display Size: 7.8 x 4.5, 9.0" in. / 19.5 x 11.5, 22.9 cm
Display Resolution: 1024 x 600 pixels
Display Type: WVGA, IPS
Weight: 26.9 lbs / 12.2 kg
Waterproof: IPX7
Maps & Memory:
Accepts Data Cards: 1 microSD™ card; 32 GB maximum size
Waypoints: 5000
Track Points: 50,000
Tracks: 50 saved tracks
Navigation Routes: 100
Ice Fishing Details:
Battery Type, Size: SLA, 7Ah
Bag Size: Extra Large (XL)
Included Transducer: GT10HN-IF
Transducer Holding Feature: Foam float
Sensors:
Has Built-in Receiver: Yes
Receiver: 10 Hz
NMEA 2000 Compatible: Yes
GPS: Yes
Glonass: Yes
Galileo: Yes
Beidou: Yes
Supports Waas: Yes
Supports Multi-Band, Multi-Constellation GPS: Yes
Built-in Maps:
Built-in Auto Guidance+: Yes (downloadable via ActiveCaptain app)
Garmin Navionics+ Inland & Coastal: Yes (see Additional)
Garmin Navionics+ (Inland): Yes (see Additional)
Optional Map Support:
Garmin Navionics+: Yes
Garmin Navionics+ VIision+™: Yes
TOPO: Yes
Standrad Mapping: Yes
Garmin Quickdraw Contours: Yes
Chartplotter Features:
ActiveCaptain® Compatable: Yes
Electrical Features:
Power Input: 9 to 18 Vdc
Sonar Features & Specifications:
Displays Sonar: Yes
Power Output: 500 W
Traditional Sonar (Dual Frequency/Beam): Built-in (single channel CHIRP, 50/77/83/200 kHz, L, M, H CHIRP)
ClearVü™: Built-in 260/455/800/1000/1200 kHz
SideVü™: Built-in 260/455/800/1000/1200 kHz
Panoptix™ Sonar: Yes
Livescope; Yes
Connections:
NMEA 2000® Ports: Yes
Garmin Marine Network Ports: 1
12-Pin Transducer Ports: 1
Bluetooth® Pairing: Yes
Ant+ (Connectivity): Yes
Garmin Wi-Fi Network (Local Connection): Yes
Additional:
Garmin Navionics+ Inland & Coastal: 95sv Canada
Garmin Navionics + (Inland): 95sv U.S. Lakes
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
2621.98 |
|
|
G-3 Twin Eye Fender 5.5" x 19" - Graphite
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.
The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Hangs vertically or horizontally
Unique Polyform valve for years of service
Technical Specifications:
Size (diameter x length) - 5.5" x 19" (14 x 48.3 cm)
Eye Diameter - 0.625" (1.6 cm)
Circumference - 17.3" 43.9 cm)
Volume - 1.4 gallons (5.3 L)
Boat Size - 15' - 20' (4.6 - 6.1 M)
Weight - 1.9 lb
*Sold as an Individual
|
18.59 |
|
|
G-3 Twin Eye Fender 5.5" x 19" - Blue with Adapter
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 5.5" x 19" (14 x 48.3cm)
Eye Diameter - .625" (1.6cm)
Circumference - 17.3" (43.9cm)
Volume - 1.4 gallons (5.3L)
Boat Size - 15' - 20' (4.6 - 6.1M)
Weight - 1.9lbs
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
23.28 |
|
|
G-3 Twin Eye Fender 5.5" x 19" - White with Adapter
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 5.5" x 19" (14 x 48.3cm)
Eye Diameter - .625" (1.6cm)
Circumference - 17.3" (43.9cm)
Volume - 1.4 gallons (5.3L)
Boat Size - 15' - 20' (4.6 - 6.1M)
Weight - 1.9lbs
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
23.28 |
|
|
G-3 Twin Eye Fender 5.5" x 19" - Black
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 5.5" x 19" (14 x 48.3cm)
Eye Diameter - .625" (1.6cm)
Circumference - 17.3" (43.9cm)
Volume - 1.4 gallons (5.3L)
Boat Size - 15' - 20' (4.6 - 6.1M)
Weight - 1.9lbs
*Sold as an Individual
|
22.73 |
|
|
G-3 Twin Eye Fender 5.5" x 19" - Blue
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 5.5" x 19" (14 x 48.3cm)
Eye Diameter - .625" (1.6cm)
Circumference - 17.3" (43.9cm)
Volume - 1.4 gallons (5.3L)
Boat Size - 15' - 20' (4.6 - 6.1M)
Weight - 1.9lbs
*Sold as an Individual
|
22.73 |
|