|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
51.79 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
64.89 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
52.69 |
|
|
New 9" & 12" e & c Series
Feature-Rich, HybridTouchTM & Non-Touch Multifunction Displays
Raymarine e-Series HybridTouchTM Displays
A New Look
The NEW e-Series 9" & 12" HybridTouch™ Displays - Make Them Your Own
Harness the full power of Raymarine navigation technologies with e-Series network multifunction displays. Each e-Series display features HybridTouch™, delivering the simplicity of touch screen control and the confidence of full keypad control when seas are rough.
Raymarine c-Series Multifunction Displays
A Smart New Shape For Marine Displays
The NEW c-Series - The Third Generation Multifunction Displays
New c-Series displays are available in 9" (c95/c97) or 12.1" (c125/c127) widescreen LCD formats with LED backlighting that is both super bright yet energy saving – up to 40% less than previous generation multifunction displays! Superior thermal management properties prevent darkening or screen blackouts at high temperatures. The bonded LCD screen eliminates condensation or contamination on the inside of the display, and maximises colour and contrast by preventing unwanted reflections.
New e-Series display's helm-friendly industrial design breaks away from box-like marine electronics, and offers a clean, unobtrusive display solution that looks great on any helm. A smart new shape for marine displays, the sleek, low-profile, bezel offers maximum display size with minimum footprint. The rugged and handsome design is complemented by flush, easy-press buttons and "hidden" memory card slots along the right hand side. An all new UniController offers precision control of the joystick cursor, rotary adjustments, and menu commands. Available with or without embedded cartography and built-in Sonar. c-Series network multifunction displays (MFD) are all-in-one navigation displays for boaters that demand performance and value. Controlled by a user-friendly keypad and Raymarine's exclusive LightHouse User Interface, c-Series puts in your command of charts, sonar, radar, and even thermal night vision. Also, making the switch from Raymarine Classic and Widescreen MFDs is easy, with our optional helm station adapters
|
|
|
Zinc Anode Set f/Bow Thruster - 35/55 kgf Bow Thrusters
Spare set zinc anode for 35/55 kgf bow thrusters. Supplied with two stainless steel allen head countersunk set screws.
|
60.95 |
|
|
6 Blade for 35/55 kgf Bow Thrusters
Propeller 6 blade, diameter 146mm, for 35/55 kgf bow thrusters. Set includes all mounting hardware for propeller. Zinc sold separately.
Working in close collaboration with the Maritime Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimized the performance of its thrusters. This has been achieved by utilizing a unique propeller blade profile, which creates little or no cavitation.
As cavitation produces unwanted noise, this new blade design offers a major reduction in the operating sound levels for VETUS bow thrusters. Moreover, the application of this propeller has reduced the current consumption by up to 10%.
|
67.68 |
|
|
VETUS Bow Thruster Zinc Washer Anode Set - 35/55 KGF with Hardware
VETUS Bow Thruster Zinc Washer Anode. Specifically 35/55 KGF with Hardware.
|
35.75 |
|
|
Prop installation hardware, sold 1 piece per package. Refer to Yamaha hardware for other spacers and washers.
|
44.99 |
|
|
Zinc Wedge Anode for 35-300 HP Mercury/Mariner Engines
Tecnoseal Zinc Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt water. Mercury part number 826134.
|
7.02 |
|
|
Aluminum Wedge Anode for 35-300 HP Mercury/Mariner Engines
Tecnoseal Aluminium Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt or brackish water. Mercury part number 826134.
|
4.96 |
|
|
Sherwood 11068 MAJOR KIT FOR RP-B-C, E-35
|
289.09 |
|
|
C-Series Solar Charge Controller - 35 Amps
PV charge, diversion and load controller
The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.
A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.
Features:
Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
Two-year standard warranty
PV charge, diversion, load controller
Available remote display with cumulative AMP hours
Electronic protection against short-circuit, overload, and over-temperature conditions
Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
Field adjustable voltage and battery set point
Automatically disconnects from the battery at night
Compatible with negative ground and ungrounded systems
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
105.70 |
|
|
Prop installation hardware, sold 1 piece per package.
|
6.79 |
|
|
Prop installation hardware, sold 1 piece per package.
|
7.69 |
|
|
Prop installation hardware, sold 1 piece per package.
|
7.29 |
|